Abstract:In this study, synthetic CaCO 3 materials were utilized as precursors for CaO-based CO 2 sorbents. The investigation examined how various operating parameters—such as synthesis temperature (ST), stirring rate (SR), and surfactant percentage (SP)—impact the properties of the adsorbents. Samples were firstly characterized by X-ray diffraction and Scanning Electron Microscopy (SEM), which revealed that the prevalence of calcite or aragonite crystal phases in the synthetic CaCO 3 precursors can be tuned by adequately choosing the dose of surfactant (Triton-X100®), so that it can be used as a crystal habit and growth modifier. The calcination process applied to the CaCO 3 precursors leads to the formation of partially sinterized cubic crystals of CaO, accompanied by minor quantities (< 5 %) of additional compounds like Ca(OH) 2 or CaSO 4 . Specific surface area (S BET ) and porosity were determined by measuring the N 2 adsorption isotherms. A CaCO 3 sample with an unprecedented value of S BET as large as 116 m 2 /g was prepared operating under optimal conditions. S BET and pore volumes were successfully correlated with the CO 2 uptake capacity of the samples. S BET is more influential for experiments carried out under diluted CO 2 atmosphere. When pure CO 2 is used, the influence of meso- and micropore volumes (V me and V mi ) is clearly predominant, which suggests that in this latter case diffusion through the porous texture of the samples plays a more remarkable role. A double-way approach through Response Surface Methodology (RSM) and the use of Artificial Neural Networks (ANNs) has been used to analyze the CO 2 uptake capacity of the samples. Within the operational interval, excellent results were obtained for pure and diluted CO 2 flow, and RSM and ANNs have demonstrated to be a very efficient tool to correlate the behavior of the CaO-based materials as CO 2 sorbents with the surface area and pore volumes of the samples. Valuable information on (i) the importance of the different factors under study; (ii) their influence on the surface and porosity of the CaO-derived sorbents; and (iii) the subsequent CO 2 capture performance of the sorbents has been obtained. The results suggest that four parameters have a statistically significant influence on CO 2 uptake. These parameters are SR, the square of SR, its interaction with SP, and the square of SP. Additionally, the study assessed the stability of the CaO-based sorbents over 11 consecutive calcination-carbonation cycles. By adequately choosing the synthesis strategy and conditions, an almost negligible shrinkage effect can be achieved, resulting in a more sustained uptake capacity throughout the cycles.

Investigating the use of CaCO3 particles synthesized in the Ca(OH)2-CO2-H2O system for organic matter removal: adsorption efficiency and recyclability

Properties of a Nano CaO/Al2O3 CO2 Sorbent

Properties of Ca-Base Co2 Sorbent Using Ca(Oh)(2) As Precursor

Particle Carbonation Kinetics Models and Activation Methods under Mild Environment: the Case of Calcium Silicate

Properties of a Nano CaO/Al<sub>2</sub>O<sub>3</sub>CO<sub>2</sub>Sorbent

Synthesis, Experimental Studies, and Analysis of a New Calcium-Based Carbon Dioxide Absorbent

Exploring the role of surface and porosity in CO 2 capture by CaO-based adsorbents through response surface methodology (RSM) and artificial neural networks (ANN)

Surface Modification of CaCO3 by Ultrasound-Assisted Titanate and Silane Coupling Agents

Application of Calcium Carbonate in the Pharmaceutical Removal Process

Experimental and Kinetics Investigations of Low-Concentration CO2 Adsorption on Several Amine-Functionalized Adsorbents

Preparation and properties of the biogas decarbonization byproduct of nano-CaCO 3 in a microfluidic device and computational fluid dynamics simulation

Promoting adsorption of organic pollutants via tailoring surface physicochemical properties of biomass-derived carbon-attapulgite

Carbon aerogel from forestry biomass as a peroxymonosulfate activator for organic contaminants degradation

Green preparation of CaO-based CO 2 adsorbent by calcium-induced hydrogenation of shell wastes at room/moderate temperature

Application of Carbon Salicylate@Alumina Nanocomposite for Removal of Organic and Inorganic Pollutants from Wastewater

Optimized Pore Configuration in Solar-Driven Regenerable Adsorbent for Organic Micro-Pollutants Removal

Dye Removal from Wastewater Using Nanostructured Chitosan Aerogels Produced by Supercritical CO 2 Drying

A study by response surface methodology (RSM) on optimization of phosphorus adsorption with nano spherical calcium carbonate derived from waste.

Synthesis of Sodium Carbonate Based Solid Adsorbents and Their CO2 Adsorption Performance

Chitosan-Biopolymer-Entrapped Activated Charcoal for Adsorption of Reactive Orange Dye from Aqueous Phase and CO2 from Gaseous Phase

Textural properties of synthetic nano-calcite produced by hydrothermal carbonation of calcium hydroxide