Preparation and properties of the biogas decarbonization byproduct of nano-CaCO 3 in a microfluidic device and computational fluid dynamics simulation

Yue Qiu,Yuyang Hou,Leizhen Lu,Shiyu Zhang,Hao Wu,Jun Zhou,Jishuang Chen

DOI: https://doi.org/10.1016/j.seppur.2023.124065

IF: 8.6

2023-05-27

Separation and Purification Technology

Abstract:Biogas decarbonization is a key step in increasing the calorific value of biogas to meet demand. However, the release of CO 2 into the atmosphere from the biogas decarbonization process increases carbon emissions. The use of Ca(OH) 2 slurry to absorb and remove CO 2 can achieve a carbon-free biogas purification process, and it is also an effective method for preparing CaCO 3 . This study prepared biogenic nano-CaCO 3 using CO 2 from biogas decarbonization with a newly fabricated microfluidic device and novel microfluidic chips were also made. The reaction pH, microfluidic chips, and total flow rate were parameters varied and studied for optimization. In addition, computational fluid dynamics (CFD) simulated the flow mixing and mass transfer of Ca(OH) 2 solution and CO 2 -rich water in the microfluidic chips. Results showed the weakly alkaline condition (pH = 7.5), microfluidic chips with 100 mL/min total flow rate enhance CO 2 absorption. At those conditions, the microfluidic device prepared 30 nm-sized nano-CaCO 3 abundantly. Further, the CFD simulation proved the necessity to select the appropriate ratio of Ca(OH) 2 solution and CO 2 -rich water to obtain nano-CaCO 3 with stable particle size. CFD also informed that increasing the length of the inlet and outlet of the reaction chamber and changing the chip shape can effectively improve CaCO 3 production.

engineering, chemical