Abstract:Owing to its high energy density, LiNi0.8Co0.1Mn0.1O2 (NMC811) is a cathode material of prime interest for electric vehicle battery manufacturers. However, NMC811 suffers from several irreversible parasitic reactions that lead to severe capacity fading and impedance buildup during prolonged cycling. Thin surface protection films coated on the cathode material mitigate degradative chemomechanical reactions at the electrode-electrolyte interphase, which helps to increase cycling stability. However, these coatings may impede the diffusion of lithium ions, and therefore, limit the performance of the cathode material at a high C-rate. Herein, we report on the synthesis of zirconium phosphate (ZrxPOy) and lithium-containing zirconium phosphate (LixZryPOz) coatings as artificial cathode-electrolyte interphases (ACEIs) on NMC811 using the atomic layer deposition technique. Upon prolonged cycling, the ZrxPOy- and LixZryPOz-coated NMC811 samples show 36.4 and 49.4% enhanced capacity retention, respectively, compared with the uncoated NMC811. Moreover, the addition of Li ions to the LixZryPOz coating enhances the rate performance and initial discharge capacity in comparison to the ZrxPOy-coated and uncoated samples. Using online electrochemical mass spectroscopy, we show that the coated ACEIs largely suppress the degradative parasitic side reactions observed with the uncoated NMC811 sample. Our study demonstrates that providing extra lithium to the ACEI layer improves the cycling stability of the NMC811 cathode material without sacrificing its rate capability performance.

Unleashing the electrochemical performance of zirconia nanoparticles on valve-regulated lead acid battery

Facilitating Ionic Conduction in the Valve‐Regulated Lead Acid Battery by Poly(vinyl alcohol)‐Halloysite Nano‐Clay Gel Polymer Electrolyte

Micron-Sized Nanoporous Vanadium Pentoxide Arrays for High-Performance Gel Zinc-Ion Batteries and Potassium Batteries

Graphene-Doped Hydrogels Promoting Ionic Conductivity in Gel-Valve-Regulated Lead Acid Batteries

Activating Gel Polymer Electrolyte Based Zinc-Ion Conduction with Filler-Integration for Advanced Zinc Batteries

Activation of Passive Nanofillers in Composite Polymer Electrolyte for Higher Performance Lithium-Ion Batteries

Investigation and Application of Polysiloxane-Based Gel Electrolyte in Valve-Regulated Lead-Acid Battery

A Novel Poly(vinyl alcohol)–tetraethylorthosilicate Hybrid Gel Electrolyte for Lead Storage Battery

Polyaniline-coated Sodium Vanadate Nanorods Cathode Boosting Zinc Ion Dynamics in Aqueous Zinc-Ion Batteries

In situ sol–gel preparation of ZrO2 in nano-composite polymer electrolyte of PVDF-HFP/MG49 for lithium-ion polymer battery

Suppression of Zinc Dendrite Growth by Enhanced Polyacrylamide Gel Electrolytes in Zinc‐ion Battery

Activating the Intrinsic Zincophilicity of PAM Hydrogel to Stabilize the Metal‐Electrolyte Dynamic Interface for Stable and Long‐Life Zinc Metal Batteries

Manipulation of Zn Deposition Behavior to Achieve High-Rate Aqueous Zinc Batteries via High Valence Zirconium Ions

Self-Reinforced Cathode Interface to Prolong the Cyclic Stability of Zn-MnO2 Batteries.

Advancements in Gel Electrolytes for High-Performance Zinc–Air Batteries to Stabilize Zinc Anodes

Application of A Novel Gelled-Electrolyte in Valve-Regulated Lead-Acid Batteries with Tubular Positive Plates

Improvement of the Electrochemical Performance of LiNi 0.8 Co 0.1 Mn 0.1 O 2 via Atomic Layer Deposition of Lithium-Rich Zirconium Phosphate Coatings

Gel Polymer Electrolyte Membranes Boosted with Sodium-Conductive Β-Alumina Nanoparticles: Application for Na-Ion Batteries

Poly(Vinyl Alcohol)/Poly(Acrylic Acid) Gel Polymer Electrolyte Modified with Multi-Walled Carbon Nanotubes and SiO2 Nanospheres to Increase Rechargeability of Zn–Air Batteries

Insight into the performance of valve-regulated lead-acid battery using sodium salt of poly(4-styrene sulfonic acid-co-maleic acid)-poly(vinyl alcohol) gel electrolyte

Electrochemical Characterization of a Zinc-Based Gel-Polymer Electrolyte and Its Application in Rechargeable Batteries