Abstract:The activities aimed at reducing the safety hazard in lithium batteries have successfully considered the replacement of the conventional, volatile and flammable carbonate-based, liquid electrolytes with more stable polymer electrolytes, obtained in the form of free standing membranes. With respect to other solid polymer electrolytes, such as those based on poly(ethylene oxide), gelled polymer electrolytes (GPEs) have the great advantage of offering high conductivity, i.e. of the order of 10 −3 S cm −1 , over a wide temperature range, combined with a large electrochemical stability, i.e. extending up to 5V versus Li + /Li [1-3]. Poly(vinylidene fluoride) (PVdF)-based, gel-type membranes have been widely investigated as Li-conducting systems and prepared by conventional solvent-casting procedures [4] or electro-spinning techniques [5]. In this work we report on originally developed, PVdF-based GPEs obtained by in-situ formation of the gel matrix during cell assembly, followed by a lithium salt infiltration step [6]. Particular emphasis was devoted to the study and the optimization of the GPE composition. The substitution of the commonly used LiPF 6 salt with the fluorine free, bis(oxalato)borate (LiBOB) was investigated. A detailed thermal and dynamical mechanical characterization was adopted to elucidate the properties of the proposed systems over a wide temperature range. Vibrational spectroscopy revealed interesting molecular interactions among components, mainly. polymer and salt, strongly affecting the stability of the membranes. The electrochemical investigation confirmed high ionic conductivity, a controlled interfacial resistivity versus lithium metal and a good electrochemical stability window. The feasibility of the in-situ gelled, PVdF-based polymer electrolyte containing the LiBOB salt was demonstrated by successful galvanostatic cyclations of the quoted membrane in different lithium-ion cell configurations, obtained by coupling a Sn-C alloying anode with an high voltage spinel or a LiFePO 4 cathode. Acknowledgments The results of this work have been obtained by the financial support of the European Community within the Seventh Framework Programme APPLES (Advanced, High Performance, Polymer Lithium Batteries for Electrochemical Storage) Project (contract number 265644). References [1] F. Croce, G.B. Appetecchi, L. Persi, B. Scrosati, Nature 394 (1998) 456. [2] G.B. Appetecchi, P. Romagnoli, B. Scrosati, Electrochem. Commun. 3 (2001) 281. [3] J. Hassoun, S. Panero, P. Reale, B. Scrosati, Adv. Mater. 2 (2009) 4807. [4] J. Hassoun, P. Reale, Bruno Scrosati, J. Mater. Chem. 17 (2007) 3668. [5] F. Croce, M.L. Focarete, J. Hassoun, I. Meschinia, B. Scrosati, Energy Environ. Sci. 4 (2011) 921. [6] L. Lombardo, M. A. Navarra, S. Panero, L. Aguilera Medina, A. Matic, J. Hassoun, J. Power Sources, 245 (2014) 232.

In situ sol–gel preparation of ZrO2 in nano-composite polymer electrolyte of PVDF-HFP/MG49 for lithium-ion polymer battery

In situ prepared nano-crystalline TiO2–poly(methyl methacrylate) hybrid enhanced composite polymer electrolyte for Li-ion batteries

Preparation of Nanocomposite Polymer Electrolyte via In Situ Synthesis of SiO2 Nanoparticles in PEO

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

In Situ Composite of Nano SiO2–P(VDF-HFP) Porous Polymer Electrolytes for Li-ion Batteries

Novel preparation of nanocomposite polymer electrolyte and its application to lithium polymer batteries

Effect of ZnO filler concentration on the conductivity, structure and morphology of PVdF-HFP nanocomposite solid polymer electrolyte for lithium battery application

A Novel UV-Cured Semi-IPN Structure PEO@Nano-SiO2 Composite Polymer Electrolyte for Lithium Metal Batteries

The Transformative Role of Nano-SiO2 in Polymer Electrolytes for Enhanced Energy Storage Solutions

In-Situ Plasticized LLZTO-PVDF Composite Electrolytes for High-Performance Solid-State Lithium Metal Batteries

A Supertough and Highly‐Conductive Nano‐Dipole Doped Composite Polymer Electrolyte with Hybrid Li + ‐Solvation Microenvironment for Lithium Metal Batteries

In Situ Hybrid Crosslinking Polymerization of Nanoparticles for Composite Polymer Electrolytes to Achieve Highly‐Stable Solid Lithium–Metal Batteries

Improving Ionic Conductivity with Bimodal-Sized Li7La3Zr2O12 Fillers for Composite Polymer Electrolytes.

Polyvinylidene fluoride nanofibers with embedded Li6.4La3Zr1.4Ta0.6O12 fillers modified polymer electrolytes for high-capacity and long-life all-solid-state lithium metal batteries

PVDF-HFP/LiTFSI based composite solid state electrolyte with different micromorphology of Li6.25Ga0.25La3Zr2O12 doping

In Situ Construction of Ether-Based Composite Electrolyte with Stable Electrode Interphase for High-Performance Solid State Lithium Metal Battery

Synergistic Coupling Between Li6.75La3Zr1.75Ta0.25O12 and Poly(vinylidene Fluoride) Induces High Ionic Conductivity, Mechanical Strength, and Thermal Stability of Solid Composite Electrolytes

In-Situ gelled Polymer Electrolytes for Advanced Lithium Ion Batteries

In-situ Synthesis of Fluoropolymer-Grafted Nanohybrid Electrolyte As Ion Reservoir for Li-metal Batteries

Incorporating lithium magnesium silicate into PVDF-HFP based solid electrolyte to achieve advanced solid-state lithium-ion batteries

Polymer Matrix Mediated Solvation of LiNO3 in Carbonate Electrolytes for Quasi-Solid High-Voltage Lithium Metal Batteries