Abstract:The propagation of low‐intensity ultrasound in polymers, acting as a high‐frequency dynamic mechanical deformation, can be successfully used to monitor changes in the modulus of polymers associated with glass transition, crystallization, cross‐linking, and other chemical and physical phenomena related to changes in the viscoelastic behavior, such as gelation phenomena. The velocity of sound is related to the polymer storage modulus and density, whereas the absorption of ultrasonic waves is related to the energy dissipation in the material and, therefore, to the loss modulus. Accordingly, ultrasonic measurements have been used by several authors to monitor the evolution of the viscoelastic moduli of polymers as a function of time or temperature and, recently, become a characterization technique of its own right, generally known as ultrasonic dynamic mechanical analysis (UDMA). Often the technique is used in conjunction with rheological methods as a means of providing a better insight into the viscoelastic behavior of polymer systems. As yet UDMA is underutilized primarily because of the low operating temperatures (usually below 100○C) of commercially available ultrasonic transducers, and also due to the requirement of a coupling medium to ensure an efficient energy transfer mechanism between the transducer and the test material. Despite these limitations, this paper shows that the use of ultrasonics is potentially a powerful method for the characterization of polymers, particularly as a tool for online monitoring of events occurring during polymer processing and in the manufacture of polymer matrix composites. The aim of this paper is to review the progress made in recent years, highlighting the potential and reliability of UDMA for monitoring physical transitions in polymers such as glass transition, melting, crystallization, as well as physical changes taking place during curing of thermosetting resins. © 2009 Wiley Periodicals, Inc. Adv Polym Techn 27:63–73, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/adv.20124

Investigating the Mechanical Properties of Polymer Samples from Different Additive Manufacturing Processes Using Ultrasonic Phase Spectroscopy

Ultrasonic Nondestructive Evaluation of Additively Manufactured Photopolymers

Acoustoelastic determination of local surface stresses in polymethylmethacrylate

Mechanical characterization of additively manufactured polymers using ultrasonic nondestructive testing

Comparative investigation on the mechanical behavior of injection molded and 3D-printed thermoplastic polyurethane

Identification of viscoelastic material properties by ultrasonic angular measurements in double through-transmission

Utilizing the derivative of unwrapped phase in ultrasonic nondestructive evaluation of elastic properties of polymer filaments

Additive manufacturing and mechanical analysis of multi-material polymer parts combining thermosets and thermoplastics

An experimental and theoretical investigation on the hyper-viscoelasticity of polyamide 12 produced by selective laser sintering

Polymer characterization by ultrasonic wave propagation

Evaluation of the influence of ultrasonic vibration on physical, tensile, and morphological properties of fused deposition modeled specimens

Characterizing Dissipative Elastic Metamaterials Produced by Additive Manufacturing

Non‐destructive Characterisation of Polymers During Injection Moulding with Ultrasonic Attenuation Measurement

Influence of Build Orientation and Part Thickness on Tensile Properties of Polyamide 12 Parts Manufactured by Selective Laser Sintering

Unraveling the main issues of direct sample printing and sample cutting from a sheet of tensile test samples for characterization of Material Extrusion components

Mechanical characterization and experimental modal analysis of 3D Printed ABS, PC and PC-ABS materials

Ultrasonic characterization of polymer viscoelasticity. Application to polystyrene

Investigation into Thermomechanical Response of Polymer Composite Materials Produced through Additive Manufacturing Technologies

Process-Structure Coupled Simulation of Additive Manufactured Components

Investigation of ultrasound velocity measurements of polymeric parts with different surface roughness

Experimental and theoretical investigation of the influence of post-curing on mixed mode fracture properties of 3d-printed polymer samples