Experimental and theoretical investigation of the influence of post-curing on mixed mode fracture properties of 3d-printed polymer samples

Bahador Bahrami,Hossein Talebi,M. M. Momeni,M. R. Ayatollahi
DOI: https://doi.org/10.1038/s41598-024-64136-y
IF: 4.6
2024-06-10
Scientific Reports
Abstract:This study explores the mechanical properties and fracture characteristics of additively manufactured acrylonitrile butadiene styrene specimens, focusing on the impact of raster angle and post-process heat treatment. To this end, a large number of tensile and semi-circular bending samples with three distinct raster angles of 0/90°, 22/ − 68°, and 45/ − 45° were prepared and exposed to four types of heat treatments with different temperature and pressure conditions. Simultaneously, theoretical models of maximum tangential stress (MTS) and generalized MTS (GMTS) were developed to estimate the onset of specimen fracture under mixed-mode in-plane loading conditions. Recognizing the non-linear behavior within the stress–strain curve of tensile test samples, particularly in the annealed samples, an effort was undertaken to transform the original ductile material into a virtual brittle material through the application of the equivalent material concept (EMC). This approach serves the dual purpose of bypassing intricate and tedious elastoplastic analysis, while concurrently enhancing the precision of the GMTS criterion. The experimental findings have revealed that while the annealing process has a minimal effect on the yield strength, it considerably enhances energy absorption capacity, increases fracture toughness, and reduces the anisotropy. Additionally, the combined EMC-GMTS criterion has demonstrated its capability to predict the failure of the additively manufactured parts with an acceptable level of accuracy.
multidisciplinary sciences
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to explore the effects of post - processing heat treatment and raster angle on the mechanical properties and fracture characteristics of 3D - printed polymer samples. Specifically, the research focuses on the following points: 1. **Effect of raster angle**: The effects of different raster angles (0/90°, 22/−68°, and 45/−45°) on the mechanical properties and fracture behavior of 3D - printed acrylonitrile - butadiene - styrene (ABS) specimens were studied. 2. **Effect of post - processing heat treatment**: Through heat treatment under four different temperature and pressure conditions, the effect of heat treatment on the mechanical properties and fracture behavior of 3D - printed ABS specimens was studied. 3. **Development of theoretical models**: The maximum tangential stress (MTS) and generalized maximum tangential stress (GMTS) theoretical models were developed to predict the fracture initiation point of specimens under in - plane mixed - mode loading conditions. 4. **Application of the equivalent material concept (EMC)**: By applying the equivalent material concept, the actual ductile material was transformed into a virtual brittle material in order to predict the fracture behavior more accurately while avoiding complex elastoplastic analysis. ### Main research contents - **Experimental part**: - 45 tensile test samples and 180 semi - circular bending (SCB) test samples were prepared, using three different raster angles respectively. - In - plane mixed - mode loading tests were carried out on heat - treated and untreated SCB samples, and the fracture load values and crack propagation paths were recorded. - The critical stress intensity factors (SIFs) were calculated using the finite element (FE) model. - **Theoretical part**: - The MTS and GMTS theoretical models were developed to predict the fracture limit curves of 3D - printed ABS samples. - The equivalent material concept (EMC) was applied to transform the actual ductile material into a virtual brittle material in order to improve the prediction accuracy of the GMTS criterion. ### Research results - **Tensile test results**: - Samples with different raster angles showed different yield stresses and plastic deformation capabilities. In particular, the samples with a 45/−45° raster angle showed a higher yield stress and better ductility. - Heat treatment had a minor effect on tensile strength, but significantly improved the energy absorption capacity and fracture toughness, and reduced anisotropy. - **Fracture test results**: - The crack initiation angles of the samples without heat treatment were inconsistent with the predictions of the MTS and GMTS theoretical models. - The crack initiation angles of the heat - treated samples were closer to the predictions of the theoretical models, indicating that heat treatment can reduce the anisotropy of 3D - printed samples and make their behavior closer to isotropic materials. ### Conclusion This research comprehensively explored the effects of raster angle and post - processing heat treatment on the mechanical properties and fracture behavior of 3D - printed ABS samples through the combination of experiments and theoretical models. The research results show that heat treatment can significantly improve the energy absorption capacity and fracture toughness of 3D - printed samples, reduce anisotropy, and make the crack propagation path more in line with theoretical predictions. These findings provide an important reference for optimizing the performance of 3D - printed parts.