Abstract:The early stage co-pyrolysis of typical plastic waste including polyethylene (PE), polypropylene (PP) and polystyrene (PS) were investigated by using the reactive force field molecular dynamics (ReaxFF MD) simulation with an automatic reaction mechanism analysis software (AutoRMA); the kinetic model, product yields and reaction process of co-pyrolysis were analyzed at atomic level. The results show that the kinetic parameters of PE/PP/PS co-pyrolysis can be obtained through the weighted sum of the parameters for the fracture of C–C and C–H bonds; the estimated activation energy is very close to the experimental one with a small error of ±3.86%, indicating that the fracture of C–C and C–H bonds can accurately characterize the co-pyrolysis process. For the co-pyrolysis of PE-PP mixture, an increase of PP content can improve the yields of oil and combustible gas, whereas for the co-pyrolysis of PP-PS mixture, the increase of PS content can improve the yields of tar and oil. In contrast, for the co-pyrolysis of PE-PP-PS mixture, a higher temperature is beneficial for the conversion of heavy oil into light oil; the light oil content increases from 44.77% at 2400 K to 56.18% at 3000 K. In addition, as a higher temperature can promote the further cracking of light hydrocarbons into gas products of smaller molecules, the yields of H2 and CH4 increase significantly with the increase of pyrolysis temperature, whereas the yields of C2H4 and C3H6 increase first and then decrease with the temperature. In comparison with the separated pyrolysis, the co-pyrolysis commences later, but displays shorter time to reach the first equilibrium state and generates products with smaller molecules. For the separate pyrolysis of PE and PP, their monomers emerge first, hereafter the alkanes and small molecule gases are produced; for the co-pyrolysis process, in contrast, the alkanes and small molecule gases are generated prior to the monomers. Moreover, PS tends to provide ·H radicals in the co-pyrolysis process, which can combine with the free radicals generated from PE and PP pyrolysis, forming small molecule alkanes and H2.

Modeling the degradation of polypropylene and polystyrene under shock compression and mechanical cleaving using the ReaxFF force field

Surface chemistry of degraded polyethylene terephthalate (PET): Insights from reactive molecular dynamics study

Atomic-scale insight into the pyrolysis of polycarbonate by ReaxFF-based reactive molecular dynamics simulation

Study on the atomic scale of thermal and thermo-oxidative degradation of polylactic acid via reactive molecular dynamics simulation

Physics and Chemistry-Based Constitutive Modeling of Photo-Oxidative Aging in Semi-Crystalline Polymers

Comparison Among Three Different Approaches to Dynamic Damage Measurement for Polymer Blends

Insight into the Competitive Reaction Mechanism of Polyethylene Terephthalate (PET) Pyrolysis by ReaxFF-based Reactive Molecular Dynamics Simulation

Deformation and fracture of polystyrene/polypropylene blends: A simulation study

ReaxFF-based Reactive Molecular Dynamics Simulation of Pyrolysis of Polyurethane/Vinyl Ester Resin Used for Wind Turbine Blades

A Deterministic model to predict tacticity changes during controlled degradation of polypropylene

Rheological Insights into the Degradation Behavior of PP/HDPE Blends

A Reactive Molecular Dynamics Simulation Study to the Disintegration of PVDF and Its Composite under the Impact of a Single Silicon-Oxygen Cluster

Characterization of Volatile Compounds, Structural, Thermal and Physico-Mechanical Properties of Cross-Linked Polyethylene Foams Degraded Thermo-Mechanically at Variable Times

Micro-Structure and Fracture Behavior of High-Melt-Strength PPs Prepared by Reactive Extrusion

Influences of Molecular Weight and Crystalline Structure on Fracture Behavior of Controlled-Rheology-Polypropylene Prepared by Reactive Extrusion

Research on Kapton Aerobic Pyrolysis by Using ReaxFF Molecular Dynamics Simulation

Photooxidative degradation and fragmentation behaviors of oriented isotactic polypropylene

Mechanical Behaviors and Molecular Deformation Mechanisms of Polymers under High Speed Shock Compression: A Molecular Dynamics Simulation Study

ReaxFF MD Study on the Early Stage Co-Pyrolysis of Mixed PE/PP/PS Plastic Waste

Static Mechanical Properties of Expanded Polypropylene Crushable Foam

Atomic Oxygen-Induced Surface Erosion Behavior and Mechanical Degradation of Polyether Ether Ketone Via Reactive Molecular Dynamics Simulations