Abstract:The sintering and microwave dielectric properties of a ceramic material based on the mixing of Mg3B2O6 and Zn3B2O6 have been widely studied using first principles calculations and experimental solid‐state reactions. Characterization methods include the Network Analyzer, X‐ray, Raman diffraction, scanning electron microscopy, energy‐dispersive spectroscopy, and differential‐thermal & thermo‐mechanical analyzer. The increasing amount of Mg2+ results in the appearance of Mg2B2O5 and ZnO, and the mutual substitution (Mg2+ and Zn2+) phenomenon has emerged in Zn3B2O6 and Mg2B2O5. The mechanisms have been explained with the help of DFT calculations. The bond parameters and electron distributions of the ZnO4 tetrahedron and the MgO6 octahedron have been modified due to substitution. The sintering, substitution, and phase formation properties have been analyzed quantitatively through the energy parameters. The best dielectric properties were obtained for x=0.20 sintered at 950 ℃, εr=6.47, Q×f=89,600 GHz (15.2 GHz), τf=‐48.6 ppm/℃, relative density=96.7 %. The mixing of Zn3B2O6 and Mg3B2O6 ceramics is a feasible method to obtain a ceramic with low sintering temperature and excellent dielectric properties.

An easy approach to realize high thermal conductivity similar to single crystal and low hygroscopicity in magnesia sintered at low temperature

Fabrication of Y2O3-doped MgO Refractory Raw Materials Based on Magnesium Hydroxide from Salt-Lake Brine

Nanocrystalline Composite Layer Realized by Simple Sintering Without Surface Treatment, Reducing Hydrophilicity and Increasing Thermal Conductivity

Fabrication and Analysis of Lightweight Magnesia Refractories with Micro-Nanometer Double Pore Size Structure

Three‐phase borate solid solution with low sintering temperature, high‐quality factor, and low dielectric constant

Preparation and properties of porous MgO based ceramics from magnesite tailings and fused magnesia

Surface hydrate-assisted low- and medium-temperature sintering of MgO

From sol–gel prepared porous silica to monolithic porous Mg2Si/MgO composite materials

Study on Sintering Additive for High Purity Beryllium Oxide Ceramics with High Thermal Conductivity

Influence of B2O3 on Dielectric, Mechanical, and Thermal Properties of MgO-Al2O3-SiO2 Glass-Ceramics

High sintering and dielectric performance: The improved (Mg, Zn)3B2O6 ceramics with the help of the DFT calculation

Activated treatment of magnesite for preparing size-controlled Mg2B2O5 whiskers and their microwave dielectric properties

Preparation and Characterization of Microporous Magnesia‐based Refractory

Low-temperature Sintering to Fabricate MgB2 by Using Mg(BH4)2 As Precursor

Effect of bismuth oxide on the thermal storage performance of carbonate/magnesium oxide composite

Development of an Ultra-Low Carbon MgO Refractory Doped with α-Al2O3 Nanoparticles for the Steelmaking Industry: A Microstructural and Thermo-Mechanical Study

The Microscopic Origin of Low Thermal Conductivity for Enhanced Thermoelectric Performance of Yb Doped Mgagsb

Sintering characteristics and crystallization for sol–gel-derived powders for low-dielectric and low-temperature sintering ceramics

Amelioration of Sintering and Multi-Frequency Dielectric Properties of Mg 3 B 2 O 6 :A Mechanism Study of Nickel Substitution Using DFT Calculation

Mechanism study of the Mn‐substituted magnesium borate: Decreased sintering temperature and improved dielectric property

A novel low thermal conductivity refractory aggregate for high-temperature applications: Lightweight microporous alumina-rich spinel (Mg0.4Al2.4O4)