Speciation of ionic alkyllead in potable water and soil.

D. Chakraborti,W. Dirkx,R. Van Cleuvenbergen,F. Adams

DOI: https://doi.org/10.1016/0048-9697(89)90387-2

1989-08-01

Abstract:

What problem does this paper attempt to address?

Octave-spanning Kerr soliton frequency combs in dispersion- and dissipation-engineered lithium niobate microresonators

Yunxiang Song,Yaowen Hu,Xinrui Zhu,Kiyoul Yang,Marko Loncar

2024-05-26

Abstract:Dissipative Kerr solitons from optical microresonators, commonly referred to as soliton microcombs, have been developed for a broad range of applications, including precision measurement, optical frequency synthesis, and ultra-stable microwave and millimeter wave generation, all on a chip. An important goal for microcombs is self referencing, which requires octave-spanning bandwidths to detect and stabilize the comb carrier envelope offset frequency. Further, detection and locking of the comb spacings are often achieved using frequency division by electro-optic modulation. The thin-film lithium niobate photonic platform, with its low loss, strong second- and third-order nonlinearity, as well as large Pockels effect, is ideally suited for these tasks. However, octave-spanning soliton microcombs are challenging to demonstrate on this platform, largely complicated by strong Raman effects hindering reliable fabrication of soliton devices. Here, we demonstrate entirely connected and octave-spanning soliton microcombs on thin-film lithium niobate. With appropriate control over microresonator free spectral range and dissipation spectrum, we show that soliton-inhibiting Raman effects are suppressed, and soliton devices are fabricated with near-unity yield. Our work offers an unambiguous method for soliton generation on strongly Raman-active materials. Further, it anticipates monolithically integrated, self-referenced frequency standards in conjunction with established technologies, such as periodically poled waveguides and electro-optic modulators, on thin-film lithium niobate.

Optics,Applied Physics
Octave-spanning Soliton Microcomb in Silica Microdisk Resonators

Jiaxin Gu,Xuan LI,Kai Qi,Keren Pu,Zhixuan LI,Fan Zhang,Tao LI,Zhenda Xie,Min Xiao,Xiaoshun Jiang

DOI: https://doi.org/10.1364/ol.479251

IF: 3.6

2023-01-01

Optics Letters

Abstract:We demonstrate a chip-based octave-spanning soliton microcomb in a whispering gallery mode microresonator platform. By fabricating a silica microdisk resonator and optimizing its dispersion with dry etching, we achieve an octave-spanning single-soliton microcomb with a repetition rate of ∼670 GHz at an optical pump power of 162.6 mW. Also, two dispersive waves at the end of the spectrum are observed to extend the comb spectral range and improve the comb power.
Engineered Coupling Enables Octave-spanning Soliton Microcombs in Thin-film Lithium Niobate

Yunxiang Song,Yaowen Hu,Xinrui Zhu,Kiyoul Yang,Marko Lončar

DOI: https://doi.org/10.1364/cleo_si.2024.sm1m.1

2024-01-01

Abstract:We present an octave-spanning soliton microcomb in thin-film lithium niobate. The comb is connected between 126 and 252 THz, with repetition rate 491.85 GHz. Engineered coupling suppresses Raman lasing and enhances comb extraction.
Foundry manufacturing of octave-spanning microcombs

Jizhao Zang,Haixin Liu,Travis C. Briles,Scott B. Papp

2024-04-21

Abstract:Soliton microcombs provide a chip-based, octave-spanning source for self-referencing and optical metrology. We explore use of a silicon-nitride integrated photonics foundry to manufacture octave-spanning microcombs. By group-velocity dispersion engineering with the waveguide cross-section, we shape the soliton spectrum for dispersive-wave spectral enhancements at the frequencies for f-2f self-referencing. With the optimized waveguide geometry, we control the carrier-envelope offset frequency by adjusting the resonator radius. Moreover, we demonstrate the other considerations for octave microcombs, including models for soliton spectrum design, ultra-broadband resonator external coupling, low-loss edge couplers, and the nonlinear self-interactions of few-cycle solitons. This design process permits highly repeatable creation of soliton microcombs optimized for pump operation less than 100 mW, an electronically detectable offset frequency, and high comb mode power for f-2f detection. However, these design aspects must also be made compatible with the foundry fabrication tolerance of octave microcomb devices. Our experiments highlight the potential to manufacture a single-chip solution for an octave-spanning microcomb, which is the central component of a compact microsystem for optical metrology.

Optics,Pattern Formation and Solitons,Applied Physics
Octave-spanning Lithium Niobate Soliton Microcombs

Yang He,Raymond Lopez-Rios,Qifan Yang,Jingwei Ling,Mingxiao Li,Kerry Vahala,Qiang Lin

DOI: https://doi.org/10.1364/cleo_si.2021.stu2g.1

2021-01-01

Abstract:We report lithium niobate soliton microcombs with spectral bandwidths exceeding one octave and spanning 125 THz to 268 THz.
1550‐Nm Band Soliton Microcombs in Ytterbium‐Doped Lithium‐Niobate Microrings

Chen Yang,Shuo Yang,Fan Du,Xianhong Zeng,Beichen Wang,Zijiao Yang,Qiang Luo,Rui Ma,Ru Zhang,Di Jia,Zhenzhong Hao,Yongnan Li,Qifan Yang,Xu Yi,Fang Bo,Yongfa Kong,Guoquan Zhang,Jingjun Xu

DOI: https://doi.org/10.1002/lpor.202200510

2023-01-01

LASER & PHOTONICS REVIEWS

Abstract:Micro-optical frequency combs are miniaturized coherent light sources exhibiting a tremendous influence on precision spectroscopy, optical clocks, and high-speed optical communications. The rare-earth-doped lithium niobate (LN) is a promising platform to integrate the lasers and comb sources on the same chip of single material. However, microcombs generated in rare-earth-doped LN thin film (LNTF) have not yet been fully explored. To explore the protocols of generating optical combs in ytterbium-doped LNTF, the comb-like laser is studied in the 1060 nm band, and the dissipative Kerr soliton is experimentally demonstrated in the telecom band in a Z-cut wafer. The over-coupled fundamental transverse electric mode with anomalous dispersion is excited at an on-chip pump power of 75.7 mW to generate the robust bright soliton. The broadband spectrum of the Kerr soliton ranges from 1480 to 1660 nm with 110 comb lines, whose repetition rate is 197.8 GHz. The mode-locking of the soliton can be achieved as a result of the photorefractive effect of ytterbium-doped LNTF instead of complex feedback schemes. Numerical simulations are highly accordant with the experimental results. This work expands the microcomb-generating platform and increases the potential for integrated on-chip applications including precision ranging and frequency division.
Soliton Microcomb Generation at 2 Μm in Z-Cut Lithium Niobate Microring Resonators.

Zheng Gong,Xianwen Liu,Yuntao Xu,Mingrui Xu,Joshua B. Surya,Juanjuan Lu,Alexander Bruch,Changling Zou,Hong X. Tang

DOI: https://doi.org/10.1364/ol.44.003182

IF: 3.6

2019-01-01

Optics Letters

Abstract:Chip-based soliton frequency combs have been demonstrated on various material platforms, offering broadband, mutually coherent, and equally spaced frequency lines desired for many applications. Lithium niobate (LN), possessing both second- and third-order optical nonlinearities, as well as integrability on insulating substrates, has emerged as a novel source for microcomb generation and controlling. Here we demonstrate mode-locked soliton microcombs generated around 2 μm in a high-Q z-cut LN microring resonator. The intracavity photorefractive effect is found to be still dominant over the thermal effect in the 2 μm region, which facilitates direct accessing soliton states in the red-detuned regime, as reported in the telecom band. We also find that intracavity stimulated Raman scattering is greatly suppressed when moving the pump wavelength from the telecom band to 2 μm, thus alleviating Raman-Kerr comb competition. This Letter expands mode-locked LN microcombs to 2 μm, and could enable a variety of potential applications based on LN nanophotonic platform.
Passively stable 0.7-octave microcombs in thin-film lithium niobate microresonators

Zexing Zhao,Chenyu Wang,Jingyuan Qiu,Zhilin Ye,Zhijun Yin,Kunpeng Jia,Xiaohui Tian,Zhenda Xie,Shi-Ning Zhu

2023-11-24

Abstract:Optical frequency comb based on microresonator (microcomb) is an integrated coherent light source and has the potential to promise a high-precision frequency standard, and self-reference and long-term stable microcomb is the key to this realization. Here, we demonstrated a 0.7-octave spectrum Kerr comb via dispersion engineering in a thin film lithium niobate microresonator, and the single soliton state can be accessed passively with long-term stability over 3 hours. With such a robust broadband coherent comb source using thin film lithium niobate, fully stabilized microcomb can be expected for massive practical applications.

Optics
Octave-spanning microcombs generation with controllable intracavity soliton states

Feng Ye,Zihao Cheng,Dongmei Huang,Xuanyi Liu,H. Y. Fu,P. K. A. Wai,Qian Li

2023-01-01

Abstract:We propose a monolithically integrated scheme to efficiently generate robust octave-spanning microcombs with controllable intracavity soliton states using a single CW pump.
Microresonator-referenced soliton microcombs with zeptosecond-level timing noise

Xing Jin,Zhenyu Xie,Xiangpeng Zhang,Hanfei Hou,Fangxing Zhang,Xuanyi Zhang,Lin Chang,Qihuang Gong,Qi-Fan Yang

2024-01-23

Abstract:Optical frequency division relies on optical frequency combs to coherently translate ultra-stable optical frequency references to the microwave domain. This technology has enabled microwave synthesis with ultralow timing noise, but the required instruments are too bulky for real-world applications. Here, we develop a compact optical frequency division system using microresonator-based frequency references and comb generators. The soliton microcomb formed in an integrated Si$_3$N$_4$ microresonator is stabilized to two lasers referenced to an ultrahigh-$Q$ MgF$_2$ microresonator. Photodetection of the soliton pulse train produces 25 GHz microwaves with absolute phase noise of -141 dBc/Hz (547 zs Hz$^{-1/2}$) at 10 kHz offset frequency. The synthesized microwaves are tested as local oscillators in jammed communication channels, resulting in improved fidelity compared with those derived from electronic oscillators. Our work demonstrates unprecedented coherence in miniature microwave oscillators, providing key building blocks for next-generation timekeeping, navigation, and satellite communication systems.

Optics,Applied Physics
Atom-referenced on-chip soliton microcomb

Rui Niu,Shuai Wan,Tian-Peng Hua,Wei-Qiang Wang,Zheng-Yu Wang,Jin Li,Zhu-Bo Wang,Ming Li,Zhen Shen,Y. R. Sun,Shui-Ming Hu,B. E. Little,S. T. Chu,Wei Zhao,Guang-Can Guo,Chang-Ling Zou,Yun-Feng Xiao,Wen-Fu Zhang,Chun-Hua Dong

2023-05-05

Abstract:For the applications of the frequency comb in microresonators, it is essential to obtain a fully frequency-stabilized microcomb laser source. Here, we demonstrate an atom-referenced stabilized soliton microcomb generation system based on the integrated microring resonator. The pump light around $1560.48\,\mathrm{nm}$ locked to an ultra-low-expansion (ULE) cavity, is frequency-doubled and referenced to the atomic transition of $^{87}\mathrm{Rb}$. The repetition rate of the soliton microcomb is injection-locked to an atomic-clock-stabilized radio frequency (RF) source, leading to mHz stabilization at $1$ seconds. As a result, all comb lines have been frequency-stabilized based on the atomic reference and could be determined with very high precision reaching $\sim18\,\mathrm{Hz}$ at 1 second, corresponding to the frequency stability of $9.5\times10^{-14}$. Our approach provides an integrated and fully stabilized microcomb experiment scheme with no requirement of $f-2f$ technique, which could be easily implemented and generalized to various photonic platforms, thus paving the way towards the portable and ultraprecise optical sources for high precision spectroscopy.

Optics,Instrumentation and Detectors
A self-starting bi-chromatic LiNbO3 soliton microcomb

Yang HE,Qi-Fan Yang,Jingwei Ling,Rui Luo,Hanxiao Liang,Mingxiao Li,Boqiang Shen,Heming Wang,Kerry Vahala,Qiang Lin

DOI: https://doi.org/10.48550/arXiv.1812.09610

2018-12-23

Abstract:For its many useful properties, including second and third-order optical nonlinearity as well as electro-optic control, lithium niobate is considered an important potential microcomb material. Here, a soliton microcomb is demonstrated in a monolithic high-Q lithium niobate resonator. Besides the demonstration of soliton mode locking, the photorefractive effect enables mode locking to self-start and soliton switching to occur bi-directionally. Second-harmonic generation of the soliton spectrum is also observed, an essential step for comb self-referencing. The Raman shock time constant of lithium niobate is also determined by measurement of soliton self-frequency-shift. Besides the considerable technical simplification provided by a self-starting soliton system, these demonstrations, together with the electro-optic and piezoelectric properties of lithium niobate, open the door to a multi-functional microcomb providing f-2f generation and fast electrical control of optical frequency and repetition rate, all of which are critical in applications including time keeping, frequency synthesis/division, spectroscopy and signal generation.

Optics
Generating octave-bandwidth soliton frequency combs with compact, low-power semiconductor lasers

Travis C. Briles,Su-Peng Yu,Tara E. Drake,Jordan R. Stone,Scott B. Papp

DOI: https://doi.org/10.1103/PhysRevApplied.14.014006

2020-01-22

Abstract:We report a comprehensive study of low-power, octave-bandwidth, single-soliton microresonator frequency combs in both the 1550 nm and 1064 nm bands. Our experiments utilize fully integrated silicon-nitride Kerr microresonators, and we demonstrate direct soliton generation with widely available distributed-Bragg-reflector lasers that provide less than 40 mW of chip-coupled laser power. We report measurements of soliton thermal dynamics and demonstrate how rapid laser-frequency control, consistent with the thermal timescale of a microresonator, facilitates stabilization of octave-bandwidth soliton combs. Moreover, since soliton combs are completely described by fundamental linear and nonlinear dynamics of the intraresonator field, we demonstrate the close connection between modeling and generation of octave-bandwidth combs. Our experiments advance the development of self-referenced frequency combs with integrated-photonics technology, and comb-laser sources with tens of terahertz pulse bandwidth across the near-infrared.

Optics
III-Nitride nanophotonics for beyond-octave soliton generation and self-referencing

Xianwen Liu,Zheng Gong,Alexander W. Bruch,Joshua B. Surya,Juanjuan Lu,Hong X. Tang

DOI: https://doi.org/10.1038/s41467-021-25751-9

2020-12-25

Abstract:Frequency microcombs, successors to mode-locked laser and fiber combs, enable miniature rulers of light for applications including precision metrology, molecular fingerprinting, and exoplanet discoveries. To enable the frequency ruling function, microcombs must be stabilized by locking their carrier-envelop offset frequency. So far, the microcomb stabilization remains compounded by the elaborate optics external to the chip, thus evading its scaling benefit. To address this challenge, here we demonstrate a nanophotonic chip solution based on aluminum nitride thin films, which simultaneously offer optical Kerr nonlinearity for generating octave soliton combs and Pockels nonlinearity for enabling heterodyne detection of the offset frequency. The agile dispersion control of crystalline III-Nitride photonics permits high-fidelity generation of solitons with features including 1.5-octave comb span, dual dispersive waves, and sub-terahertz repetition rates down to 220 gigahertz. These attractive characteristics, aided by on-chip phase-matched aluminum nitride waveguides, allow the full determination of the offset frequency. Our proof-of-principle demonstration represents an important milestone towards fully-integrated self-locked microcombs for portable optical atomic clocks and frequency synthesizers.

Applied Physics,Optics
Integrated Turnkey Soliton Microcombs

Boqiang Shen,Lin Chang,Junqiu Liu,Heming Wang,Qi-Fan Yang,Chao Xiang,Rui Ning Wang,Jijun He,Tianyi Liu,Weiqiang Xie,Joel Guo,David Kinghorn,Lue Wu,Qing-Xin Ji,Tobias J. Kippenberg,Kerry Vahala,John E. Bowers

DOI: https://doi.org/10.1038/s41586-020-2358-x

IF: 64.8

2020-01-01

Nature

Abstract:Optical frequency combs have a wide range of applications in science and technology 1 . An important development for miniature and integrated comb systems is the formation of dissipative Kerr solitons in coherently pumped high-quality-factor optical microresonators 2 – 9 . Such soliton microcombs 10 have been applied to spectroscopy 11 – 13 , the search for exoplanets 14 , 15 , optical frequency synthesis 16 , time keeping 17 and other areas 10 . In addition, the recent integration of microresonators with lasers has revealed the viability of fully chip-based soliton microcombs 18 , 19 . However, the operation of microcombs requires complex startup and feedback protocols that necessitate difficult-to-integrate optical and electrical components, and microcombs operating at rates that are compatible with electronic circuits—as is required in nearly all comb systems—have not yet been integrated with pump lasers because of their high power requirements. Here we experimentally demonstrate and theoretically describe a turnkey operation regime for soliton microcombs co-integrated with a pump laser. We show the appearance of an operating point at which solitons are immediately generated by turning the pump laser on, thereby eliminating the need for photonic and electronic control circuitry. These features are combined with high-quality-factor Si 3 N 4 resonators to provide microcombs with repetition frequencies as low as 15 gigahertz that are fully integrated into an industry standard (butterfly) package, thereby offering compelling advantages for high-volume production.
Towards visible soliton microcomb generation

Seung Hoon Lee,Dong Yoon Oh,Qi-Fan Yang,Boqiang Shen,Heming Wang,Ki Youl Yang,Yu-Hung Lai,Xu Yi,Xinbai Li,Kerry Vahala

DOI: https://doi.org/10.1038/s41467-017-01473-9

IF: 16.6

2017-11-03

Nature Communications

Abstract:Frequency combs have applications that extend from the ultra-violet into the mid-infrared bands. Microcombs, a miniature and often semiconductor-chip-based device, can potentially access most of these applications, but are currently more limited in spectral reach. Here, we demonstrate mode-locked silica microcombs with emission near the edge of the visible spectrum. By using both geometrical and mode-hybridization dispersion control, devices are engineered for soliton generation while also maintaining optical Q factors as high as 80 million. Electronics-bandwidth-compatible (20 GHz) soliton mode locking is achieved with low pumping powers (parametric oscillation threshold powers as low as 5.4 mW). These are the shortest wavelength soliton microcombs demonstrated to date and could be used in miniature optical clocks. The results should also extend to visible and potentially ultra-violet bands.

multidisciplinary sciences
Electrically pumped photonic integrated soliton microcomb

Arslan S. Raja,Andrey S. Voloshin,Hairun Guo,Sofya E. Agafonova,Junqiu Liu,Alexander S. Gorodnitskiy,Maxim Karpov,Nikolay G. Pavlov,Erwan Lucas,Ramzil R. Galiev,Artem E. Shitikov,John D. Jost,Michael L. Gorodetsky,Tobias J. Kippenberg

DOI: https://doi.org/10.1038/s41467-019-08498-2

2018-11-22

Abstract:Optical frequency combs have revolutionized frequency metrology and timekeeping, and can be used in a wide range of optical technologies. Advances are under way that allow dramatic miniaturization of optical frequency combs using Kerr nonlinear optical microresonators, where broadband and coherent optical frequency combs can be generated from a continuous wave laser. Such `microcombs', provide a broad bandwidth with low power consumption, unprecedented form factor, wafer scale fabrication compatibility. For future high volume applications, integration and electrical pumping of soliton microcombs is essential. To date, however, microcombs still rely on optical pumping by bulk external laser modules that provide the required coherence, frequency agility and power levels for soliton formation. Electrically-driven, chip-integrated microcombs are inhibited by the high threshold power for soliton formation, typically exceeding the power of integrated silicon based lasers, and the required frequency agility for soliton initiation. Recent advances in high-Q Si3N4 microresonators suggest that electrically driven soliton microcombs are possible. Here we demonstrate an electrically-driven, chip-integrated soliton microcomb by coupling an indium phosphide (III-V) multiple-longitudinal-mode laser diode chip to a high-Q Si3N4 photonic integrated microresonator. We observe that self-injection locking of the laser diode to the microresonator, which is accompanied by a x1000 fold narrowing of the laser linewidth, can simultaneously initiate the formation of dissipative Kerr solitons. By tuning the current, we observe a transition from modulation instability, breather solitons to single soliton states. The system requires less than 1 Watt of electrical power, operates at electronically-detectable sub-100 GHz mode spacing and can fit in a volume of ca. 1cm3.

Optics,Applied Physics
Soliton Frequency Comb at Microwave Rates in A High-Q Silica Microresonator

Xu Yi,Qi-Fan Yang,Ki Youl Yang,Myoung-Gyun Suh,Kerry Vahala

DOI: https://doi.org/10.1364/optica.2.001078

IF: 10.4

2015-01-01

Optica

Abstract:Frequency combs are having a broad impact on science and technology because they provide a way to coherently link radio/microwave-rate electrical signals with optical-rate signals derived from lasers and atomic transitions. Integrating these systems on a photonic chip would revolutionize instrumentation, time keeping, spectroscopy, navigation, and potentially create new mass-market applications. A key element of such a system-on-a-chip will be a mode-locked comb that can be self-referenced. The recent demonstration of soliton mode locking in crystalline and silicon nitride microresonators has provided a way to both mode lock and generate femtosecond time-scale pulses. Here, soliton mode locking is demonstrated in high-Q silica resonators. The resonators produce low-phase-noise soliton pulse trains at readily detectable pulse rates—two essential properties for the operation of frequency combs. A method for the long-term stabilization of the solitons is also demonstrated, and is used to test the theoretical dependence of the comb power, efficiency, and soliton existence power on the pulse width. The influence of the Raman process on the soliton existence power and efficiency is also observed. The resonators are microfabricated on silicon chips and feature reproducible modal properties required for soliton formation. A low-noise and detectable pulse rate soliton frequency comb on a chip is a significant step towards a fully integrated frequency comb system.
Aluminum nitride nanophotonics for beyond-octave soliton microcomb generation and self-referencing

Xianwen Liu,Zheng Gong,Alexander W. Bruch,Joshua B. Surya,Juanjuan Lu,Hong X. Tang

DOI: https://doi.org/10.1038/s41467-021-25751-9

IF: 16.6

2021-09-14

Nature Communications

Abstract:Abstract Frequency microcombs, alternative to mode-locked laser and fiber combs, enable miniature rulers of light for applications including precision metrology, molecular fingerprinting and exoplanet discoveries. To enable frequency ruling functions, microcombs must be stabilized by locking their carrier-envelope offset frequency. So far, the microcomb stabilization remains compounded by the elaborate optics external to the chip, thus evading its scaling benefit. To address this challenge, here we demonstrate a nanophotonic chip solution based on aluminum nitride thin films, which simultaneously offer optical Kerr nonlinearity for generating octave soliton combs and quadratic nonlinearity for enabling heterodyne detection of the offset frequency. The agile dispersion control of crystalline aluminum nitride photonics permits high-fidelity generation of solitons with features including 1.5-octave spectral span, dual dispersive waves, and sub-terahertz repetition rates down to 220 gigahertz. These attractive characteristics, aided by on-chip phase-matched aluminum nitride waveguides, allow the full determination of the offset frequency. Our proof-of-principle demonstration represents an important milestone towards fully integrated self-locked microcombs for portable optical atomic clocks and frequency synthesizers.

multidisciplinary sciences

Speciation of ionic alkyllead in potable water and soil.

Octave-spanning Kerr soliton frequency combs in dispersion- and dissipation-engineered lithium niobate microresonators

Octave-spanning Soliton Microcomb in Silica Microdisk Resonators

Engineered Coupling Enables Octave-spanning Soliton Microcombs in Thin-film Lithium Niobate

Foundry manufacturing of octave-spanning microcombs

Octave-spanning Lithium Niobate Soliton Microcombs

1550‐Nm Band Soliton Microcombs in Ytterbium‐Doped Lithium‐Niobate Microrings

Soliton Microcomb Generation at 2 Μm in Z-Cut Lithium Niobate Microring Resonators.

Passively stable 0.7-octave microcombs in thin-film lithium niobate microresonators

Octave-spanning microcombs generation with controllable intracavity soliton states

Microresonator-referenced soliton microcombs with zeptosecond-level timing noise

Atom-referenced on-chip soliton microcomb

A self-starting bi-chromatic LiNbO3 soliton microcomb

Generating octave-bandwidth soliton frequency combs with compact, low-power semiconductor lasers

III-Nitride nanophotonics for beyond-octave soliton generation and self-referencing

Integrated Turnkey Soliton Microcombs

Towards visible soliton microcomb generation

Electrically pumped photonic integrated soliton microcomb

Soliton Frequency Comb at Microwave Rates in A High-Q Silica Microresonator

Aluminum nitride nanophotonics for beyond-octave soliton microcomb generation and self-referencing