Octave-spanning microcombs generation with controllable intracavity soliton states

Feng Ye,Zihao Cheng,Dongmei Huang,Xuanyi Liu,H. Y. Fu,P. K. A. Wai,Qian Li

2023-01-01

Abstract:We propose a monolithically integrated scheme to efficiently generate robust octave-spanning microcombs with controllable intracavity soliton states using a single CW pump.

What problem does this paper attempt to address?

Octave soliton microcombs in lithium niobate microresonators

Pi-Yu Wang,Shuai Wan,Rui Ma,Wei Li,Fang Bo,Guang-Can Guo,Chun-Hua Dong

DOI: https://doi.org/10.1364/OL.514893

2024-04-01

Abstract:Soliton microcombs are regarded as an ideal platform for applications such as optical communications, optical sensing, low-noise microwave sources, optical atomic clocks, and frequency synthesizers. Many of these applications require a broad comb spectrum that covers an octave, essential for implementing the f - 2f self-referencing techniques. In this work, we have successfully generated an octave-spanning soliton microcomb based on a z-cut thin-film lithium niobate (TFLN) microresonator. This achievement is realized under on-chip optical pumping at 340 mW and through extensive research into the broadening of dual dispersive waves (DWs). Furthermore, the repetition rate of the octave soliton microcomb is accurately measured using an electro-optic comb generated by an x-cut TFLN racetrack microresonator. Our results represent a crucial step toward the realization of practical, integrated, and fully stabilized soliton microcomb systems based on TFLN.
Foundry manufacturing of octave-spanning microcombs

Jizhao Zang,Haixin Liu,Travis C. Briles,Scott B. Papp

2024-04-21

Abstract:Soliton microcombs provide a chip-based, octave-spanning source for self-referencing and optical metrology. We explore use of a silicon-nitride integrated photonics foundry to manufacture octave-spanning microcombs. By group-velocity dispersion engineering with the waveguide cross-section, we shape the soliton spectrum for dispersive-wave spectral enhancements at the frequencies for f-2f self-referencing. With the optimized waveguide geometry, we control the carrier-envelope offset frequency by adjusting the resonator radius. Moreover, we demonstrate the other considerations for octave microcombs, including models for soliton spectrum design, ultra-broadband resonator external coupling, low-loss edge couplers, and the nonlinear self-interactions of few-cycle solitons. This design process permits highly repeatable creation of soliton microcombs optimized for pump operation less than 100 mW, an electronically detectable offset frequency, and high comb mode power for f-2f detection. However, these design aspects must also be made compatible with the foundry fabrication tolerance of octave microcomb devices. Our experiments highlight the potential to manufacture a single-chip solution for an octave-spanning microcomb, which is the central component of a compact microsystem for optical metrology.

Optics,Pattern Formation and Solitons,Applied Physics
Octave-spanning Soliton Microcomb in Silica Microdisk Resonators

Jiaxin Gu,Xuan LI,Kai Qi,Keren Pu,Zhixuan LI,Fan Zhang,Tao LI,Zhenda Xie,Min Xiao,Xiaoshun Jiang

DOI: https://doi.org/10.1364/ol.479251

IF: 3.6

2023-01-01

Optics Letters

Abstract:We demonstrate a chip-based octave-spanning soliton microcomb in a whispering gallery mode microresonator platform. By fabricating a silica microdisk resonator and optimizing its dispersion with dry etching, we achieve an octave-spanning single-soliton microcomb with a repetition rate of ∼670 GHz at an optical pump power of 162.6 mW. Also, two dispersive waves at the end of the spectrum are observed to extend the comb spectral range and improve the comb power.
Integrated Turnkey Soliton Microcombs Operated at CMOS Frequencies

Boqiang Shen,Lin Chang,Junqiu Liu,Heming Wang,Qi-Fan Yang,Chao Xiang,Rui Ning Wang,Jijun He,Tianyi Liu,Weiqiang Xie,Joel Guo,David Kinghorn,Lue Wu,Qing-Xin Ji,Tobias J. Kippenberg,Kerry Vahala,John E. Bowers

DOI: https://doi.org/10.1364/cleo_si.2020.sf3o.4

2020-01-01

Abstract:We experimentally discovered and theoretically explain a novel turnkey regime for operation of soliton microcombs, wherein a new operating point enables the direct access of the soliton state by simple turn-on of the pump laser.
Engineered Coupling Enables Octave-spanning Soliton Microcombs in Thin-film Lithium Niobate

Yunxiang Song,Yaowen Hu,Xinrui Zhu,Kiyoul Yang,Marko Lončar

DOI: https://doi.org/10.1364/cleo_si.2024.sm1m.1

2024-01-01

Abstract:We present an octave-spanning soliton microcomb in thin-film lithium niobate. The comb is connected between 126 and 252 THz, with repetition rate 491.85 GHz. Engineered coupling suppresses Raman lasing and enhances comb extraction.
Intracavity characterization of micro-comb generation in the single-soliton regime

Pei-Hsun Wang,Jose A. Jaramillo-Villegas,Yi Xuan,Xiaoxiao Xue,Chengying Bao,Daniel E. Leaird,Minghao Qi,Andrew M. Weiner

DOI: https://doi.org/10.48550/arXiv.1603.03154

2016-03-10

Abstract:Soliton formation in on-chip micro-comb generation balances cavity dispersion and nonlinearity and allows coherent, low-noise comb operation. We study the intracavity waveform of an on-chip microcavity soliton in a silicon nitride microresonator configured with a drop port. Whereas combs measured at the through port are accompanied by a very strong pump line which accounts for >99% of the output power, our experiments reveal that inside the microcavity, most of the power is in the soliton. Time-domain measurements performed at the drop port provide information that directly reflects the intracavity field. Data confirm a train of bright, close to bandwidth-limited pulses, accompanied by a weak continuous wave (CW) background with a small phase shift relative to the comb.

Optics
Integrated Vortex Soliton Microcombs

Yanwu Liu,Chenghao Lao,Min Wang,Yinke Cheng,Yuanlei Wang,Shiyao Fu,Chunqing Gao,Jianwei Wang,Bei-Bei Li,Qihuang Gong,Yun-Feng Xiao,Wenjing Liu,Qi-Fan Yang

DOI: https://doi.org/10.1038/s41566-024-01418-x

IF: 35

2024-01-01

Nature Photonics

Abstract:Synergistic control of the frequency and orbital angular momentum (OAM) of light offers new opportunities for the generation of spatio-temporal optical waveforms and optical metrology. However, their physical realizations are typically bulky and complex owing to challenges in creating, manipulating and detecting mutually coherent, high-dimensional OAM states. Here we achieve combined control over the frequency and the OAM of a comb structure on a photonic chip. Dissipative optical solitons are formed in a nonlinear ring microresonator and emitted owing to engraved angular gratings, with each comb line carrying a distinct OAM. The beam of such a vortex soliton microcomb manifests dynamically revolving, double-helical intensity profiles. The one-to-one correspondence between the OAM and frequencies features a high extinction ratio of over 18.5 dB, enabling precision spectroscopy of optical vortices. Our work provides an integrated solution for realizing coherent light sources that are multiplexed in the spatial and frequency domains, with the potential to establish a new approach to the generation of high-dimensional structured light. Nonlinear microring resonators can generate a vortex soliton microcomb, that is, a frequency comb with each comb line carrying a distinct orbital angular momentum.
Integrated Turnkey Soliton Microcombs

Boqiang Shen,Lin Chang,Junqiu Liu,Heming Wang,Qi-Fan Yang,Chao Xiang,Rui Ning Wang,Jijun He,Tianyi Liu,Weiqiang Xie,Joel Guo,David Kinghorn,Lue Wu,Qing-Xin Ji,Tobias J. Kippenberg,Kerry Vahala,John E. Bowers

DOI: https://doi.org/10.1038/s41586-020-2358-x

IF: 64.8

2020-01-01

Nature

Abstract:Optical frequency combs have a wide range of applications in science and technology 1 . An important development for miniature and integrated comb systems is the formation of dissipative Kerr solitons in coherently pumped high-quality-factor optical microresonators 2 – 9 . Such soliton microcombs 10 have been applied to spectroscopy 11 – 13 , the search for exoplanets 14 , 15 , optical frequency synthesis 16 , time keeping 17 and other areas 10 . In addition, the recent integration of microresonators with lasers has revealed the viability of fully chip-based soliton microcombs 18 , 19 . However, the operation of microcombs requires complex startup and feedback protocols that necessitate difficult-to-integrate optical and electrical components, and microcombs operating at rates that are compatible with electronic circuits—as is required in nearly all comb systems—have not yet been integrated with pump lasers because of their high power requirements. Here we experimentally demonstrate and theoretically describe a turnkey operation regime for soliton microcombs co-integrated with a pump laser. We show the appearance of an operating point at which solitons are immediately generated by turning the pump laser on, thereby eliminating the need for photonic and electronic control circuitry. These features are combined with high-quality-factor Si 3 N 4 resonators to provide microcombs with repetition frequencies as low as 15 gigahertz that are fully integrated into an industry standard (butterfly) package, thereby offering compelling advantages for high-volume production.
Octave-spanning Kerr soliton frequency combs in dispersion- and dissipation-engineered lithium niobate microresonators

Yunxiang Song,Yaowen Hu,Xinrui Zhu,Kiyoul Yang,Marko Loncar

2024-05-26

Abstract:Dissipative Kerr solitons from optical microresonators, commonly referred to as soliton microcombs, have been developed for a broad range of applications, including precision measurement, optical frequency synthesis, and ultra-stable microwave and millimeter wave generation, all on a chip. An important goal for microcombs is self referencing, which requires octave-spanning bandwidths to detect and stabilize the comb carrier envelope offset frequency. Further, detection and locking of the comb spacings are often achieved using frequency division by electro-optic modulation. The thin-film lithium niobate photonic platform, with its low loss, strong second- and third-order nonlinearity, as well as large Pockels effect, is ideally suited for these tasks. However, octave-spanning soliton microcombs are challenging to demonstrate on this platform, largely complicated by strong Raman effects hindering reliable fabrication of soliton devices. Here, we demonstrate entirely connected and octave-spanning soliton microcombs on thin-film lithium niobate. With appropriate control over microresonator free spectral range and dissipation spectrum, we show that soliton-inhibiting Raman effects are suppressed, and soliton devices are fabricated with near-unity yield. Our work offers an unambiguous method for soliton generation on strongly Raman-active materials. Further, it anticipates monolithically integrated, self-referenced frequency standards in conjunction with established technologies, such as periodically poled waveguides and electro-optic modulators, on thin-film lithium niobate.

Optics,Applied Physics
Soliton Microcombs Multiplexing Using Intracavity-Stimulated Brillouin Lasers

Hao Zhang,Teng Tan,Hao-Jing Chen,Yan Yu,Wenting Wang,Bing Chang,Yupei Liang,Yanhong Guo,Heng Zhou,Handing Xia,Qihuang Gong,Chee Wei Wong,Yunjiang Rao,Yun-Feng Xiao,and Baicheng Yao

DOI: https://doi.org/10.1103/physrevlett.130.153802

IF: 8.6

2023-04-13

Physical Review Letters

Abstract:Solitons in microresonators have spurred intriguing nonlinear optical physics and photonic applications. Here, by combining Kerr and Brillouin nonlinearities in an over-modal microcavity, we demonstrate spatial multiplexing of soliton microcombs under a single external laser pumping operation. This demonstration offers an ideal scheme to realize highly coherent dual-comb sources in a compact, low-cost and energy-efficient manner, with uniquely low beating noise. Moreover, by selecting the dual-comb modes, the repetition rate difference of a dual-comb pair could be flexibly switched, ranging from 8.5 to 212 MHz. Beyond dual-comb, the high-density mode geometry allows the cascaded Brillouin lasers, driving the co-generation of up to 5 space-multiplexing frequency combs in distinct mode families. This Letter offers a novel physics paradigm for comb interferometry and provides a widely appropriate tool for versatile applications such as comb metrology, spectroscopy, and ranging. https://doi.org/10.1103/PhysRevLett.130.153802 © 2023 American Physical Society

physics, multidisciplinary
Generating octave-bandwidth soliton frequency combs with compact, low-power semiconductor lasers

Travis C. Briles,Su-Peng Yu,Tara E. Drake,Jordan R. Stone,Scott B. Papp

DOI: https://doi.org/10.1103/PhysRevApplied.14.014006

2020-01-22

Abstract:We report a comprehensive study of low-power, octave-bandwidth, single-soliton microresonator frequency combs in both the 1550 nm and 1064 nm bands. Our experiments utilize fully integrated silicon-nitride Kerr microresonators, and we demonstrate direct soliton generation with widely available distributed-Bragg-reflector lasers that provide less than 40 mW of chip-coupled laser power. We report measurements of soliton thermal dynamics and demonstrate how rapid laser-frequency control, consistent with the thermal timescale of a microresonator, facilitates stabilization of octave-bandwidth soliton combs. Moreover, since soliton combs are completely described by fundamental linear and nonlinear dynamics of the intraresonator field, we demonstrate the close connection between modeling and generation of octave-bandwidth combs. Our experiments advance the development of self-referenced frequency combs with integrated-photonics technology, and comb-laser sources with tens of terahertz pulse bandwidth across the near-infrared.

Optics
Soliton microcombs in silicon-carbide microresonators

Chengli Wang,Jin Li,Ailun Yi,Zhiwei Fang,Liping Zhou,Zhe Wang,Rui Niu,Jiaxiang Zhang,Ya Cheng,Junqiu Liu,Chun-Hua Dong,Xin Ou

DOI: https://doi.org/10.1109/tencon55691.2022.9977969

2022-01-01

Abstract:We demonstrate SiC-based soliton microcombs operated at room temperature - a key step for integrated SiC nonlinear photonics for frequency metrology applications. We have successfully routed and switched among different soliton states using an auxiliary laser to optically counteract the thermo-optic effect. In addition to single soliton generation, we further observe a wideband comb spectra translation from near-infrared to visible via the second-order nonlinearity, key for the realization of on-chip f -to-2f self-referencing,
Dual-comb Generation with Counter-Propagating Self-Injection-locked Solitons.

Xinghong Li,Zhaoyi Wang,Shangyuan Li,Xiaoping Zheng,Xiaoxiao Xue

DOI: https://doi.org/10.1364/oe.501778

IF: 3.8

2023-01-01

Optics Express

Abstract:Microresonator-based optical frequency combs have been greatly developed in the last decade and have shown great potential for many applications. A dual-comb scheme is usually required for lidar ranging, spectroscopy, spectrometer and microwave photonic channelizer. However, dual-comb generation with microresonators would require doubled hardware resources and more complex feedback control. Here we propose a novel scheme for dual-comb generation with a single laser diode self-injection locked to a single microresonator. The output of the laser diode is split and pumps the microresonator in clockwise and counter-clockwise directions. The scheme is investigated intensely through numerical simulations based on a set of coupled Lugiato-Lefever equations. Turnkey counter-propagating single soliton generation and repetition rate tuning are demonstrated.
Spectral Extension and Synchronisation of Microcombs in a Single Microresonator

Shuangyou Zhang,Jonathan Silver,Pascal DelHaye

DOI: https://doi.org/10.48550/arXiv.2002.06168

2020-02-14

Optics

Abstract:We demonstrate that the optical spectrum of a soliton microcomb generated in a microresonator can be coherently extended by using bichromatic pumping: one pump with a frequency in the anomalous dispersion regime of the microresonator is used to generate a bright soliton microcomb while a second pump in the normal dispersion regime both compensates the thermal effect of the microresonator and generates a second frequency comb via cross-phase modulation with the bright soliton, thus extending the spectrum of the microcomb. Experimental results for different microresonators show that the mode spacings of the two combs are synchronised, even when the combs are generated in different mode families. Numerical simulations agree well with experimental results and reveal that a bright optical pulse from the second pump is passively formed in the normal dispersion regime and trapped by the bright soliton. We believe the demonstrated technique provides an alternative way to generate broadband microcombs and multi-coloured frequency combs that can be useful for frequency metrology and spectroscopy. In addition, this method enables the selective enhancement of available optical power in specific parts of the comb spectrum.
Coherently Pumped Microcavity Soliton Physics and Dual-Comb Applications

Cai Zhaoyu,Wang Zihao,Yang Changxi,Bao Chengying

DOI: https://doi.org/10.3788/irla20220271

2022-01-01

Infrared and Laser Engineering

Abstract:Optical solitons are wavepackets that can sustain the shape via a nonlinear refractive index potential well. They exist in a wide range of optical systems spanning optical fibers, fiber lasers and parametric oscillators. Recently, a new type optical solitons have been observed in coherently pumped high-Q microcavities. The observation of microcavity optical solitons provides a well-controlled experimental platform to study soliton physics. Microcavity optical solitons also endow an array of highly stable spectral lines in the frequency domain, which advance the miniaturization of frequency comb systems. These soliton microcombs have been self-reference stabilized and could enable many chip-based applications including optical frequency synthesizers, optical atomic clocks, data transmission, spectrometer and LiDAR in the near future. Here, the fundamental of microcavity optical solitons was introduced, with a special focus on soliton interaction dynamics. The microcavity dual-comb measurement based applications in fast imaging and mid-infrared gas spectroscopy were also discussed.
Soliton Microcomb Generation in a III-V Photonic Crystal Cavity

Alberto Nardi,Alisa Davydova,Nikolai Kuznetsov,Miles H. Anderson,Charles Möhl,Johann Riemensberger,Paul Seidler,Tobias J. Kippenberg

2023-04-27

Abstract:Photonic crystals, material structures in which the dielectric function varies periodically in one, two, or three dimensions, can provide exquisite control over the propagation and confinement of light. By tailoring their band structure, exceptional optical effects can be achieved, such as slow light propagation or, through the creation of photonic bandgaps, optical cavities with both a high quality factor and a small mode volume. Photonic crystal cavities have been used to realize compact nano-lasers and achieve strong coupling to quantum emitters, such as semiconductor quantum dots, color centers, or cold atoms. A useful attribute of photonic crystals is the ability to create chirped mirrors. Chirping has underpinned advances in ultra-fast lasers based on bulk mirrors, but has yet to be fully exploited in integrated photonics, where it could provide a means to engineer otherwise unattainable dispersion profiles for a range of nonlinear optical applications, including soliton frequency comb generation. The vast majority of integrated resonators for frequency combs make use of microring geometries, where only waveguide width and height are varied to engineer dispersion. Generation of frequency combs has been demonstrated with one-dimensional photonic crystal cavities made of silicon nitride, but the low index contrast prevents formation of broad soliton combs. We overcome these challenges by using a photonic-crystal Fabry-Pérot resonator made of gallium phosphide, a material with a high refractive index and a Kerr nonlinearity 200 times larger than that of silicon nitride. We employ chirped photonic crystal mirrors to provide anomalous dispersion. With subharmonic pulsed pumping at an average power of 23.6 mW, we are able to access stable dissipative Kerr frequency combs. We demonstrate soliton formation with a 3-dB bandwidth of 3.0 THz, corresponding to a pulse duration of 60 fs.

Optics
Pockels soliton microcomb

Alexander W. Bruch,Xianwen Liu,Zheng Gong,Joshua B. Surya,Ming Li,Chang-Ling Zou,Hong X. Tang

DOI: https://doi.org/10.1038/s41566-020-00704-8

IF: 35

2020-10-19

Nature Photonics

Abstract:Kerr soliton microcombs have recently emerged as a prominent topic in integrated photonics and have enabled new horizons for optical frequency metrology. Kerr soliton microcombs, as the name suggests, are based on high-order cubic optical nonlinearity. It is desirable to exploit quadratic photonic materials, namely Pockels materials, for soliton generation and on-chip implementation of 1<i>f</i>–2<i>f</i> comb self-referencing. Such quadratically driven solitons have been proposed theoretically, but have not yet been observed in a nanophotonic platform, despite recent progress in quadratic comb generation in free-space and crystalline resonators. Here, we report photonic-chip-based Pockels microcomb solitons driven by three-wave mixing in an aluminium nitride microring resonator. In contrast to typical Kerr solitons, the Pockels soliton features unity soliton generation fidelity, two-by-two evolution of multi-soliton states, favourable tuning dynamics and high pump-to-soliton conversion efficiency.

optics,physics, applied
On the generation of octave-spanning optical frequency combs using monolithic whispering-gallery-mode microresonators

Yanne K. Chembo,Nan Yu

DOI: https://doi.org/10.1364/ol.35.002696

IF: 3.6

2010-08-06

Optics Letters

Abstract:Octave-spanning optical frequency combs are especially interesting in optical metrology owing to the ability of self-referencing. We report a theoretical study on the generation of octave-spanning combs in the whispering gallery modes of a microresonator. Through a modal expansion model simulation in a calcium fluoride microcavity, we show that a combination of suitable pump power, Kerr nonlinearity, and dispersion profile can lead to stable and robust octave-spanning optical frequency combs.

optics
Soliton Microcombs in Integrated Chalcogenide Microresonators

Di Xia,Zelin Yang,Pingyang Zeng,Bin Zhang,Jiayue Wu,Zifu Wang,Jiaxin Zhao,Mingqi Gao,Yufei Huang,Jianteng Huang,Liyang Luo,Dong Liu,Shuixian Yang,Hairun Guo,Zhaohui Li

DOI: https://doi.org/10.48550/arXiv.2202.05992

2022-02-12

Optics

Abstract:Photonic integrated microcombs have enabled advanced applications in optical communication, microwave synthesis, and optical metrology, which in nature unveil an optical dissipative soliton pattern under cavity-enhanced nonlinear processes. The most decisive factor of microcombs lies in the photonic material platforms, where materials with high nonlinearity and in capacity of high-quality chip integration are highly demanded. In this work, we present a home-developed chalcogenide glasses-Ge25Sb10S65 (GeSbS) for the nonlinear photonic integration and for the dissipative soliton microcomb generation. Compared with the current integrated nonlinear platforms, the GeSbS features wider transparency from the visible to 11 um region, stronger nonlinearity, and lower thermo-refractive coefficient, and is CMOS compatible in fabrication. In this platform, we achieve chip-integrated optical microresonators with a quality (Q) factor above 2 x 10^6, and carry out lithographically controlled dispersion engineering. In particular, we demonstrate that both a bright soliton-based microcomb and a dark-pulsed comb are generated in a single microresonator, in its separated fundamental polarized mode families under different dispersion regimes. The overall pumping power is on the ten-milliwatt level, determined by both the high Q-factor and the high material nonlinearity of the microresonator. Our results may contribute to the field of nonlinear photonics with an alternative material platform for highly compact and high-intensity nonlinear interactions, while on the application aspect, contribute to the development of soliton microcombs at low operation power, which is potentially required for monolithically integrated optical frequency combs.

Octave-spanning microcombs generation with controllable intracavity soliton states

Octave soliton microcombs in lithium niobate microresonators

Foundry manufacturing of octave-spanning microcombs

Octave-spanning Soliton Microcomb in Silica Microdisk Resonators

Integrated Turnkey Soliton Microcombs Operated at CMOS Frequencies

Engineered Coupling Enables Octave-spanning Soliton Microcombs in Thin-film Lithium Niobate

Intracavity characterization of micro-comb generation in the single-soliton regime

Integrated Vortex Soliton Microcombs

Integrated Turnkey Soliton Microcombs

Octave-spanning Kerr soliton frequency combs in dispersion- and dissipation-engineered lithium niobate microresonators

Soliton Microcombs Multiplexing Using Intracavity-Stimulated Brillouin Lasers

Generating octave-bandwidth soliton frequency combs with compact, low-power semiconductor lasers

Soliton microcombs in silicon-carbide microresonators

Dual-comb Generation with Counter-Propagating Self-Injection-locked Solitons.

Spectral Extension and Synchronisation of Microcombs in a Single Microresonator

Coherently Pumped Microcavity Soliton Physics and Dual-Comb Applications

Soliton Microcomb Generation in a III-V Photonic Crystal Cavity

Pockels soliton microcomb

On the generation of octave-spanning optical frequency combs using monolithic whispering-gallery-mode microresonators

Soliton Microcombs in Integrated Chalcogenide Microresonators