Octave-spanning Lithium Niobate Soliton Microcombs

Yang He,Raymond Lopez-Rios,Qifan Yang,Jingwei Ling,Mingxiao Li,Kerry Vahala,Qiang Lin

DOI: https://doi.org/10.1364/cleo_si.2021.stu2g.1

2021-01-01

Abstract:We report lithium niobate soliton microcombs with spectral bandwidths exceeding one octave and spanning 125 THz to 268 THz.

What problem does this paper attempt to address?

Engineered Coupling Enables Octave-spanning Soliton Microcombs in Thin-film Lithium Niobate

Yunxiang Song,Yaowen Hu,Xinrui Zhu,Kiyoul Yang,Marko Lončar

DOI: https://doi.org/10.1364/cleo_si.2024.sm1m.1

2024-01-01

Abstract:We present an octave-spanning soliton microcomb in thin-film lithium niobate. The comb is connected between 126 and 252 THz, with repetition rate 491.85 GHz. Engineered coupling suppresses Raman lasing and enhances comb extraction.
Octave soliton microcombs in lithium niobate microresonators

Pi-Yu Wang,Shuai Wan,Rui Ma,Wei Li,Fang Bo,Guang-Can Guo,Chun-Hua Dong

DOI: https://doi.org/10.1364/OL.514893

2024-04-01

Abstract:Soliton microcombs are regarded as an ideal platform for applications such as optical communications, optical sensing, low-noise microwave sources, optical atomic clocks, and frequency synthesizers. Many of these applications require a broad comb spectrum that covers an octave, essential for implementing the f - 2f self-referencing techniques. In this work, we have successfully generated an octave-spanning soliton microcomb based on a z-cut thin-film lithium niobate (TFLN) microresonator. This achievement is realized under on-chip optical pumping at 340 mW and through extensive research into the broadening of dual dispersive waves (DWs). Furthermore, the repetition rate of the octave soliton microcomb is accurately measured using an electro-optic comb generated by an x-cut TFLN racetrack microresonator. Our results represent a crucial step toward the realization of practical, integrated, and fully stabilized soliton microcomb systems based on TFLN.
Octave-spanning Kerr soliton frequency combs in dispersion- and dissipation-engineered lithium niobate microresonators

Yunxiang Song,Yaowen Hu,Xinrui Zhu,Kiyoul Yang,Marko Loncar

2024-05-26

Abstract:Dissipative Kerr solitons from optical microresonators, commonly referred to as soliton microcombs, have been developed for a broad range of applications, including precision measurement, optical frequency synthesis, and ultra-stable microwave and millimeter wave generation, all on a chip. An important goal for microcombs is self referencing, which requires octave-spanning bandwidths to detect and stabilize the comb carrier envelope offset frequency. Further, detection and locking of the comb spacings are often achieved using frequency division by electro-optic modulation. The thin-film lithium niobate photonic platform, with its low loss, strong second- and third-order nonlinearity, as well as large Pockels effect, is ideally suited for these tasks. However, octave-spanning soliton microcombs are challenging to demonstrate on this platform, largely complicated by strong Raman effects hindering reliable fabrication of soliton devices. Here, we demonstrate entirely connected and octave-spanning soliton microcombs on thin-film lithium niobate. With appropriate control over microresonator free spectral range and dissipation spectrum, we show that soliton-inhibiting Raman effects are suppressed, and soliton devices are fabricated with near-unity yield. Our work offers an unambiguous method for soliton generation on strongly Raman-active materials. Further, it anticipates monolithically integrated, self-referenced frequency standards in conjunction with established technologies, such as periodically poled waveguides and electro-optic modulators, on thin-film lithium niobate.

Optics,Applied Physics
Octave-spanning Soliton Microcomb in Silica Microdisk Resonators

Jiaxin Gu,Xuan LI,Kai Qi,Keren Pu,Zhixuan LI,Fan Zhang,Tao LI,Zhenda Xie,Min Xiao,Xiaoshun Jiang

DOI: https://doi.org/10.1364/ol.479251

IF: 3.6

2023-01-01

Optics Letters

Abstract:We demonstrate a chip-based octave-spanning soliton microcomb in a whispering gallery mode microresonator platform. By fabricating a silica microdisk resonator and optimizing its dispersion with dry etching, we achieve an octave-spanning single-soliton microcomb with a repetition rate of ∼670 GHz at an optical pump power of 162.6 mW. Also, two dispersive waves at the end of the spectrum are observed to extend the comb spectral range and improve the comb power.
A Lithium Niobate Soliton Microcomb

Yang He,Qi‐Fan Yang,Jingwei Ling,Rui Luo,Hanxiao Liang,Mingxiao Li,Boqiang Shen,Heming Wang,Kerry J. Vahala,Qiang Lin

DOI: https://doi.org/10.1364/nlo.2019.nw3a.4

2019-01-01

Abstract:Get PDF Email Share Share with Facebook Tweet This Post on reddit Share with LinkedIn Add to CiteULike Add to Mendeley Add to BibSonomy Get Citation Copy Citation Text Y. He, Q. Yang, J. Ling, R. Luo, H. Liang, M. Li, B. Shen, H. Wang, K. Vahala, and Q. Lin, "A Lithium Niobate Soliton Microcomb," in Nonlinear Optics (NLO), OSA Technical Digest (Optica Publishing Group, 2019), paper NW3A.4. Export Citation BibTex Endnote (RIS) HTML Plain Text Citation alert Save article
Soliton Microcomb Generation at 2 Μm in Z-Cut Lithium Niobate Microring Resonators.

Zheng Gong,Xianwen Liu,Yuntao Xu,Mingrui Xu,Joshua B. Surya,Juanjuan Lu,Alexander Bruch,Changling Zou,Hong X. Tang

DOI: https://doi.org/10.1364/ol.44.003182

IF: 3.6

2019-01-01

Optics Letters

Abstract:Chip-based soliton frequency combs have been demonstrated on various material platforms, offering broadband, mutually coherent, and equally spaced frequency lines desired for many applications. Lithium niobate (LN), possessing both second- and third-order optical nonlinearities, as well as integrability on insulating substrates, has emerged as a novel source for microcomb generation and controlling. Here we demonstrate mode-locked soliton microcombs generated around 2 μm in a high-Q z-cut LN microring resonator. The intracavity photorefractive effect is found to be still dominant over the thermal effect in the 2 μm region, which facilitates direct accessing soliton states in the red-detuned regime, as reported in the telecom band. We also find that intracavity stimulated Raman scattering is greatly suppressed when moving the pump wavelength from the telecom band to 2 μm, thus alleviating Raman-Kerr comb competition. This Letter expands mode-locked LN microcombs to 2 μm, and could enable a variety of potential applications based on LN nanophotonic platform.
1550‐Nm Band Soliton Microcombs in Ytterbium‐Doped Lithium‐Niobate Microrings

Chen Yang,Shuo Yang,Fan Du,Xianhong Zeng,Beichen Wang,Zijiao Yang,Qiang Luo,Rui Ma,Ru Zhang,Di Jia,Zhenzhong Hao,Yongnan Li,Qifan Yang,Xu Yi,Fang Bo,Yongfa Kong,Guoquan Zhang,Jingjun Xu

DOI: https://doi.org/10.1002/lpor.202200510

2023-01-01

LASER & PHOTONICS REVIEWS

Abstract:Micro-optical frequency combs are miniaturized coherent light sources exhibiting a tremendous influence on precision spectroscopy, optical clocks, and high-speed optical communications. The rare-earth-doped lithium niobate (LN) is a promising platform to integrate the lasers and comb sources on the same chip of single material. However, microcombs generated in rare-earth-doped LN thin film (LNTF) have not yet been fully explored. To explore the protocols of generating optical combs in ytterbium-doped LNTF, the comb-like laser is studied in the 1060 nm band, and the dissipative Kerr soliton is experimentally demonstrated in the telecom band in a Z-cut wafer. The over-coupled fundamental transverse electric mode with anomalous dispersion is excited at an on-chip pump power of 75.7 mW to generate the robust bright soliton. The broadband spectrum of the Kerr soliton ranges from 1480 to 1660 nm with 110 comb lines, whose repetition rate is 197.8 GHz. The mode-locking of the soliton can be achieved as a result of the photorefractive effect of ytterbium-doped LNTF instead of complex feedback schemes. Numerical simulations are highly accordant with the experimental results. This work expands the microcomb-generating platform and increases the potential for integrated on-chip applications including precision ranging and frequency division.
Passively stable 0.7-octave microcombs in thin-film lithium niobate microresonators

Zexing Zhao,Chenyu Wang,Jingyuan Qiu,Zhilin Ye,Zhijun Yin,Kunpeng Jia,Xiaohui Tian,Zhenda Xie,Shi-Ning Zhu

2023-11-24

Abstract:Optical frequency comb based on microresonator (microcomb) is an integrated coherent light source and has the potential to promise a high-precision frequency standard, and self-reference and long-term stable microcomb is the key to this realization. Here, we demonstrated a 0.7-octave spectrum Kerr comb via dispersion engineering in a thin film lithium niobate microresonator, and the single soliton state can be accessed passively with long-term stability over 3 hours. With such a robust broadband coherent comb source using thin film lithium niobate, fully stabilized microcomb can be expected for massive practical applications.

Optics
Foundry manufacturing of octave-spanning microcombs

Jizhao Zang,Haixin Liu,Travis C. Briles,Scott B. Papp

2024-04-21

Abstract:Soliton microcombs provide a chip-based, octave-spanning source for self-referencing and optical metrology. We explore use of a silicon-nitride integrated photonics foundry to manufacture octave-spanning microcombs. By group-velocity dispersion engineering with the waveguide cross-section, we shape the soliton spectrum for dispersive-wave spectral enhancements at the frequencies for f-2f self-referencing. With the optimized waveguide geometry, we control the carrier-envelope offset frequency by adjusting the resonator radius. Moreover, we demonstrate the other considerations for octave microcombs, including models for soliton spectrum design, ultra-broadband resonator external coupling, low-loss edge couplers, and the nonlinear self-interactions of few-cycle solitons. This design process permits highly repeatable creation of soliton microcombs optimized for pump operation less than 100 mW, an electronically detectable offset frequency, and high comb mode power for f-2f detection. However, these design aspects must also be made compatible with the foundry fabrication tolerance of octave microcomb devices. Our experiments highlight the potential to manufacture a single-chip solution for an octave-spanning microcomb, which is the central component of a compact microsystem for optical metrology.

Optics,Pattern Formation and Solitons,Applied Physics
Octave-spanning microcombs generation with controllable intracavity soliton states

Feng Ye,Zihao Cheng,Dongmei Huang,Xuanyi Liu,H. Y. Fu,P. K. A. Wai,Qian Li

2023-01-01

Abstract:We propose a monolithically integrated scheme to efficiently generate robust octave-spanning microcombs with controllable intracavity soliton states using a single CW pump.
Soliton Microcomb Operation to 778 Nm

Q. -F. Yang,S. H. Lee,D. Y. Oh,B. Shen,H. Wang,K. Y. Yang,Y. H. Lai,X. Yi,K. Vahala

DOI: https://doi.org/10.1109/ipcon.2017.8116040

2017-01-01

Abstract:Soliton microcombs are demonstrated at both 1064 nm and 778 nm by dispersion-engineering on-chip silica resonators. These are the shortest wavelength soliton microcombs demonstrated to date and have potential applications in optical clocks and metrology.
Towards visible soliton microcomb generation

Seung Hoon Lee,Dong Yoon Oh,Qi-Fan Yang,Boqiang Shen,Heming Wang,Ki Youl Yang,Yu-Hung Lai,Xu Yi,Xinbai Li,Kerry Vahala

DOI: https://doi.org/10.1038/s41467-017-01473-9

IF: 16.6

2017-11-03

Nature Communications

Abstract:Frequency combs have applications that extend from the ultra-violet into the mid-infrared bands. Microcombs, a miniature and often semiconductor-chip-based device, can potentially access most of these applications, but are currently more limited in spectral reach. Here, we demonstrate mode-locked silica microcombs with emission near the edge of the visible spectrum. By using both geometrical and mode-hybridization dispersion control, devices are engineered for soliton generation while also maintaining optical Q factors as high as 80 million. Electronics-bandwidth-compatible (20 GHz) soliton mode locking is achieved with low pumping powers (parametric oscillation threshold powers as low as 5.4 mW). These are the shortest wavelength soliton microcombs demonstrated to date and could be used in miniature optical clocks. The results should also extend to visible and potentially ultra-violet bands.

multidisciplinary sciences
III-Nitride nanophotonics for beyond-octave soliton generation and self-referencing

Xianwen Liu,Zheng Gong,Alexander W. Bruch,Joshua B. Surya,Juanjuan Lu,Hong X. Tang

DOI: https://doi.org/10.1038/s41467-021-25751-9

2020-12-25

Abstract:Frequency microcombs, successors to mode-locked laser and fiber combs, enable miniature rulers of light for applications including precision metrology, molecular fingerprinting, and exoplanet discoveries. To enable the frequency ruling function, microcombs must be stabilized by locking their carrier-envelop offset frequency. So far, the microcomb stabilization remains compounded by the elaborate optics external to the chip, thus evading its scaling benefit. To address this challenge, here we demonstrate a nanophotonic chip solution based on aluminum nitride thin films, which simultaneously offer optical Kerr nonlinearity for generating octave soliton combs and Pockels nonlinearity for enabling heterodyne detection of the offset frequency. The agile dispersion control of crystalline III-Nitride photonics permits high-fidelity generation of solitons with features including 1.5-octave comb span, dual dispersive waves, and sub-terahertz repetition rates down to 220 gigahertz. These attractive characteristics, aided by on-chip phase-matched aluminum nitride waveguides, allow the full determination of the offset frequency. Our proof-of-principle demonstration represents an important milestone towards fully-integrated self-locked microcombs for portable optical atomic clocks and frequency synthesizers.

Applied Physics,Optics
Aluminum nitride nanophotonics for beyond-octave soliton microcomb generation and self-referencing

Xianwen Liu,Zheng Gong,Alexander W. Bruch,Joshua B. Surya,Juanjuan Lu,Hong X. Tang

DOI: https://doi.org/10.1038/s41467-021-25751-9

IF: 16.6

2021-09-14

Nature Communications

Abstract:Abstract Frequency microcombs, alternative to mode-locked laser and fiber combs, enable miniature rulers of light for applications including precision metrology, molecular fingerprinting and exoplanet discoveries. To enable frequency ruling functions, microcombs must be stabilized by locking their carrier-envelope offset frequency. So far, the microcomb stabilization remains compounded by the elaborate optics external to the chip, thus evading its scaling benefit. To address this challenge, here we demonstrate a nanophotonic chip solution based on aluminum nitride thin films, which simultaneously offer optical Kerr nonlinearity for generating octave soliton combs and quadratic nonlinearity for enabling heterodyne detection of the offset frequency. The agile dispersion control of crystalline aluminum nitride photonics permits high-fidelity generation of solitons with features including 1.5-octave spectral span, dual dispersive waves, and sub-terahertz repetition rates down to 220 gigahertz. These attractive characteristics, aided by on-chip phase-matched aluminum nitride waveguides, allow the full determination of the offset frequency. Our proof-of-principle demonstration represents an important milestone towards fully integrated self-locked microcombs for portable optical atomic clocks and frequency synthesizers.

multidisciplinary sciences
A self-starting bi-chromatic LiNbO3 soliton microcomb

Yang HE,Qi-Fan Yang,Jingwei Ling,Rui Luo,Hanxiao Liang,Mingxiao Li,Boqiang Shen,Heming Wang,Kerry Vahala,Qiang Lin

DOI: https://doi.org/10.48550/arXiv.1812.09610

2018-12-23

Abstract:For its many useful properties, including second and third-order optical nonlinearity as well as electro-optic control, lithium niobate is considered an important potential microcomb material. Here, a soliton microcomb is demonstrated in a monolithic high-Q lithium niobate resonator. Besides the demonstration of soliton mode locking, the photorefractive effect enables mode locking to self-start and soliton switching to occur bi-directionally. Second-harmonic generation of the soliton spectrum is also observed, an essential step for comb self-referencing. The Raman shock time constant of lithium niobate is also determined by measurement of soliton self-frequency-shift. Besides the considerable technical simplification provided by a self-starting soliton system, these demonstrations, together with the electro-optic and piezoelectric properties of lithium niobate, open the door to a multi-functional microcomb providing f-2f generation and fast electrical control of optical frequency and repetition rate, all of which are critical in applications including time keeping, frequency synthesis/division, spectroscopy and signal generation.

Optics
Electro-optically Modulated Kerr Solitons on Thin-film Lithium Niobate

Yunxiang Song,Rebecca Cheng,Yaowen Hu,Xinrui Zhu,Marko Lončar,Kiyoul Yang

DOI: https://doi.org/10.1364/fio.2023.fth3e.3

2023-01-01

Abstract:We present an electro-optically modulated dissipative Kerr soliton with microwave-rate spacing over a 20 THz span, using thin-film lithium niobate. In this experiment, we first operate lithium niobate solitons with a laser power of 40 mW on chip. Electro-optic phase modulation of these solitons then generate a total of 570 frequency comb lines with 30.3 GHz spacing.
Generating octave-bandwidth soliton frequency combs with compact, low-power semiconductor lasers

Travis C. Briles,Su-Peng Yu,Tara E. Drake,Jordan R. Stone,Scott B. Papp

DOI: https://doi.org/10.1103/PhysRevApplied.14.014006

2020-01-22

Abstract:We report a comprehensive study of low-power, octave-bandwidth, single-soliton microresonator frequency combs in both the 1550 nm and 1064 nm bands. Our experiments utilize fully integrated silicon-nitride Kerr microresonators, and we demonstrate direct soliton generation with widely available distributed-Bragg-reflector lasers that provide less than 40 mW of chip-coupled laser power. We report measurements of soliton thermal dynamics and demonstrate how rapid laser-frequency control, consistent with the thermal timescale of a microresonator, facilitates stabilization of octave-bandwidth soliton combs. Moreover, since soliton combs are completely described by fundamental linear and nonlinear dynamics of the intraresonator field, we demonstrate the close connection between modeling and generation of octave-bandwidth combs. Our experiments advance the development of self-referenced frequency combs with integrated-photonics technology, and comb-laser sources with tens of terahertz pulse bandwidth across the near-infrared.

Optics
Photonic bandgap microcombs at 1064 nm

Grisha Spektor,Jizhao Zang,Atasi Dan,Travis C. Briles,Grant M. Brodnik,Haixin Liu,Jennifer A. Black,David R. Carlson,Scott B. Papp

DOI: https://doi.org/10.1063/5.0191602

IF: 5.6

2024-02-01

APL Photonics

Abstract:Microresonator frequency combs and their design versatility have revolutionized research areas from data communication to exoplanet searches. While microcombs in the 1550 nm band are well documented, there is interest in using microcombs in other bands. Here, we demonstrate the formation and spectral control of normal-dispersion dark soliton microcombs at 1064 nm. We generate 200 GHz repetition rate microcombs by inducing a photonic bandgap of the microresonator mode for the pump laser with a photonic crystal. We perform the experiments with normal-dispersion microresonators made from Ta2O5 and explore unique soliton pulse shapes and operating behaviors. By adjusting the resonator dispersion through its nanostructured geometry, we demonstrate control over the spectral bandwidth of these combs, and we employ numerical modeling to understand their existence range. Our results highlight how photonic design enables microcomb spectra tailoring across wide wavelength ranges, offering potential in bioimaging, spectroscopy, and photonic-atomic quantum technologies.

optics,physics, applied
Soliton Microwave Oscillators Using Oversized Billion Q Optical Microresonators

Lu Yao,Peng Liu,Hao-Jing Chen,Qihuang Gong,Qi-Fan Yang,Yun-Feng Xiao

DOI: https://doi.org/10.1364/optica.459130

IF: 10.4

2022-01-01

Optica

Abstract:Microresonator soliton frequency combs offer unique flexibility in synthesizing microwaves over a wide range of frequencies, while their phase noise is currently limited by thermal noise. Enlarging the mode volume would mitigate thermal noise but also raise power consumption. Here, we fabricate optical microresonators with large mode volumes by lathe machining high-purity fiber preforms. Quality factors greater than 4 billion result in a record-low threshold power of 110 µW to initiate comb operation in millimeter-sized devices. The synthesized X-band microwaves with an absolute phase noise level of − 107 ( − 133 ) d B c / H z at 1(10) kHz offset frequency feature considerable noise reduction compared to other silica-microresonator-based oscillators, which are further used to cope with high-speed data links as carrier waves. Our work illuminates a pathway toward low-noise photonic microwave generation as well as the quantum regime of soliton microcombs.

Octave-spanning Lithium Niobate Soliton Microcombs

Engineered Coupling Enables Octave-spanning Soliton Microcombs in Thin-film Lithium Niobate

Octave soliton microcombs in lithium niobate microresonators

Octave-spanning Kerr soliton frequency combs in dispersion- and dissipation-engineered lithium niobate microresonators

Octave-spanning Soliton Microcomb in Silica Microdisk Resonators

A Lithium Niobate Soliton Microcomb

Soliton Microcomb Generation at 2 Μm in Z-Cut Lithium Niobate Microring Resonators.

1550‐Nm Band Soliton Microcombs in Ytterbium‐Doped Lithium‐Niobate Microrings

Passively stable 0.7-octave microcombs in thin-film lithium niobate microresonators

Foundry manufacturing of octave-spanning microcombs

Octave-spanning microcombs generation with controllable intracavity soliton states

Soliton Microcomb Operation to 778 Nm

Towards visible soliton microcomb generation

III-Nitride nanophotonics for beyond-octave soliton generation and self-referencing

Aluminum nitride nanophotonics for beyond-octave soliton microcomb generation and self-referencing

A self-starting bi-chromatic LiNbO3 soliton microcomb

Electro-optically Modulated Kerr Solitons on Thin-film Lithium Niobate

Generating octave-bandwidth soliton frequency combs with compact, low-power semiconductor lasers

Photonic bandgap microcombs at 1064 nm

Soliton Microwave Oscillators Using Oversized Billion Q Optical Microresonators