Abstract:Optical frequency combs have revolutionized frequency metrology and timekeeping, and can be used in a wide range of optical technologies. Advances are under way that allow dramatic miniaturization of optical frequency combs using Kerr nonlinear optical microresonators, where broadband and coherent optical frequency combs can be generated from a continuous wave laser. Such `microcombs', provide a broad bandwidth with low power consumption, unprecedented form factor, wafer scale fabrication compatibility. For future high volume applications, integration and electrical pumping of soliton microcombs is essential. To date, however, microcombs still rely on optical pumping by bulk external laser modules that provide the required coherence, frequency agility and power levels for soliton formation. Electrically-driven, chip-integrated microcombs are inhibited by the high threshold power for soliton formation, typically exceeding the power of integrated silicon based lasers, and the required frequency agility for soliton initiation. Recent advances in high-Q Si3N4 microresonators suggest that electrically driven soliton microcombs are possible. Here we demonstrate an electrically-driven, chip-integrated soliton microcomb by coupling an indium phosphide (III-V) multiple-longitudinal-mode laser diode chip to a high-Q Si3N4 photonic integrated microresonator. We observe that self-injection locking of the laser diode to the microresonator, which is accompanied by a x1000 fold narrowing of the laser linewidth, can simultaneously initiate the formation of dissipative Kerr solitons. By tuning the current, we observe a transition from modulation instability, breather solitons to single soliton states. The system requires less than 1 Watt of electrical power, operates at electronically-detectable sub-100 GHz mode spacing and can fit in a volume of ca. 1cm3.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to realize a compact, efficient and mass - producible optical frequency comb technology. Specifically, the researchers aim to achieve an electrically - driven soliton microcomb by combining commercial semiconductor laser diode chips with high - Q Si₃N₄ photonic - integrated micro - resonators. The key to this technology lies in overcoming the problem that traditional microcombs rely on external large - volume laser modules, thereby achieving complete photonic integration and enabling microcombs to be used in a wider range of high - capacity applications, such as LiDAR or optical interconnections in data centers. ### Main Problems 1. **Achieving an Electrically - Driven Soliton Microcomb**: Traditional microcomb technologies rely on external laser modules to provide the required coherence, frequency flexibility and power levels to form solitons. This limits their portability and integration in practical applications. This paper proposes a method of combining commercial semiconductor laser diode chips with high - Q Si₃N₄ micro - resonators to achieve an electrically - driven soliton microcomb. 2. **Reducing the Threshold Power for Soliton Formation**: The use of high - Q Si₃N₄ micro - resonators significantly reduces the threshold power for soliton formation, making it lower than the output power of integrated silicon - based lasers, thereby making electrical driving possible. 3. **Improving the Integration and Manufacturability of Microcombs**: By directly coupling the laser diode chip to the Si₃N₄ micro - resonator, a highly - integrated system is achieved. This method not only simplifies the manufacturing process but also enables the microcomb to operate in a smaller volume, suitable for high - capacity applications. ### Solutions - **High - Q Si₃N₄ Micro - Resonator**: Use a high - Q (Q > 1×10⁷) Si₃N₄ micro - resonator, which is prepared by the photonic Damascene reflow process and has ultrasmooth waveguide sidewalls, thereby achieving a high Q - value. - **Self - Injection Locking**: By adjusting the current of the laser diode, self - injection locking between the laser diode and the micro - resonator is achieved, thereby significantly reducing the linewidth of the laser diode (by about 1000 times) and simultaneously initiating the formation of solitons. - **Current Tuning**: Through current tuning, the transition from modulation instability, breathing solitons to single - soliton states is observed, and finally a stable dissipative soliton is formed. ### Experimental Results - **Low Noise and Narrow Linewidth**: The generated soliton microcomb exhibits low - noise characteristics, and the comb - tooth linewidth is about 100 kHz. - **Low Power Consumption**: The electrical power consumed by the entire system is less than 1 watt, the mode spacing is less than 100 GHz, and the volume is about 1 cm³. - **Multiple Soliton States**: Through current tuning, the transition from a chaotic state to a breathing soliton and then to a stable soliton can be observed, verifying the flexibility and controllability of the system. ### Application Prospects - **LiDAR**: High - precision, low - power - consumption microcomb technology can be applied to LiDAR systems to improve measurement accuracy and reliability. - **Optical Interconnections in Data Centers**: Compact microcomb technology can be used for high - speed data transmission in data centers to improve communication efficiency. - **Other High - Capacity Applications**: Such as optical frequency synthesis, low - noise microwave generation, etc. In conclusion, this paper solves the limitations of traditional microcomb technologies in terms of integration, power consumption and portability by realizing an electrically - driven soliton microcomb, providing a new solution for future high - capacity applications.

Electrically pumped photonic integrated soliton microcomb

Integrated Turnkey Soliton Microcombs

Power-efficient soliton microcombs

Electrically empowered microcomb laser

Packaged photonic chip-based soliton microcomb using an ultralow-noise laser

Gain-switched semiconductor laser driven soliton microcombs

Dynamics of soliton self-injection locking in optical microresonators

Laser Soliton Microcombs Heterogeneously Integrated on Silicon

Pockels soliton microcomb

Dynamics of soliton self-injection locking in a photonic chip-based microresonator

A Photonic Integrated High-power Soliton Microcomb Generator

Monolithic piezoelectric control of soliton microcombs

Surpassing the nonlinear conversion efficiency of soliton microcombs

Soliton Frequency Comb at Microwave Rates in A High-Q Silica Microresonator

Laser soliton microcombs on silicon

Photonic chip–based optical frequency comb using soliton Cherenkov radiation

Photorefraction-assisted self-emergence of dissipative Kerr solitons

Nanophotonic soliton-based microwave synthesizers

Soliton Microcombs in Integrated Chalcogenide Microresonators

Programmable access to microresonator solitons with modulational sideband heating