Study on the Corrosion Mechanism of N80 Steel in Simulated Oxygen-Reduced Air Drive Production Wellbores
Baocheng Shi,Xingwen Wang,Kaili Zhou,Kun Xue,Kai Liu,Xingkai Zhang,Yijie Qiu
DOI: https://doi.org/10.1021/acsomega.3c02869
IF: 4.1
2023-06-25
ACS Omega
Abstract:In order to investigate the corrosion behavior of N80 steel in production wellbores of oxygen-reduced air drive, the main corrosion control factors are analyzed based on gray relational analysis. Taking reservoir simulation results as indoor simulation parameters, the corrosion behavior in different production periods is studied by the dynamic weight loss method combined with metallographic microscopy, XRD, 3D morphology, and other related characterizations. The results show that oxygen content is most sensitive to the corrosion of production wellbores. The corrosion rate increases significantly under oxygen-containing conditions, and the corrosion rate at an oxygen content of 3% (0.3 MPa) is about 5 times higher than that without oxygen. At the initial stage of oil displacement, the corrosion is CO2-dominated localized corrosion, and the corrosion products are mainly compact FeCO3. With the prolongation of gas injection time, the wellbore is in a CO2/O2 balanced environment, the corrosion changes into a combined action of the two, and the corrosion products are FeCO3 and loose porous Fe2O3. After continuous gas injection for 3 years, the production wellbore is in a high O2 and low CO2 environment, the dense FeCO3 is destroyed, the corrosion pit develops horizontally, and the corrosion changes to O2-dominated comprehensive corrosion.
chemistry, multidisciplinary