Abstract:In-situ conversion of oil shale process has been appealing from economic and energy security perspectives. Conventional in-situ upgrading techniques use electric heaters to heat oil shale, not shale oil. However, the efficiency of electrical heating method is very slow which requires preheating more than a year. Most conventional heating technologies focused on using different heat injection methods converting the shale oil reservoirs. As shale is a poor heat conductor, many of attempts are still in the laboratory stage. The shale oil matrix is very tight and the pore scale ranges from micro to nano-meter. In this paper, we propose to inject air into hydraulically fractured horizontal wells to create in-situ combustion of shale oil in ultra-low permeability formations. Heat is introduced into the formation through multistage fractured horizontal wells, which enhances the contact area of exposed kerogen. This process uses combustion reactants as fuel feed stock to generate perpetual heating. Firstly, we used the laboratory tube combustion of shale oil results to validate the simulation model. Then, we upscale the simulation model to investigate the well productivity performance by in-situ upgrading of shale oil by air injection. The main objective of this work is to determine the technical feasibility of recovering shale oil resources by air injection. It involves the application of hydraulic fracturing technology to enhance the kerogen exposure to oxygen. Heat flows from the fracture into shale oil formation, gradually converting the solid kerogen into mobile oil and gas which can be produced via fractures to the production wells. Our simulation results in this paper have shown the potential of in-situ combustion process to improved oil recovery in shale oil reservoirs. Simulation result indicates that the key parameters controlling the well productivity include air injection rate, injected gas composition and fracture spacing. The available literature provides limited studies on the applicability of in-situ combustion of shale oil in very low permeability formations. The paper provides a comprehensive model that allows kerogen to undergo thermal cracking and oxidation process. The results of this study indicate that the developed kinetic model is feasible to model the kerogen in-situ conversion process induced by air injection.

Insights for Air Injection EOR from Static Oxidization Behaviours of Crude Oil

Experimental Study on the Safety of Exhaust Gas in the Air Injection Process for Light Oil Reservoirs

Investigation on the Low Temperature Oxidation of Light Oil for Safely Enhancing Oil Recovery at High Temperatures and Pressures

Oil oxidation in the whole temperature regions during oil reservoir air injection and development methods

Experimental Study on Low-Temperature-Oxidation Parameters and Simulations of Exothermic Process during Air Injection in Light Oil Reservoirs

Recovery of Adsorbed and Free Oil in Shale Formations by CO2 Injection: an Experimental Study Using 1D- and 2D-NMR

Air Injection for Enhanced Oil Recovery: In Situ Monitoring the Low-Temperature Oxidation of Oil through Thermogravimetry/Differential Scanning Calorimetry and Pressure Differential Scanning Calorimetry

Experimental study on dynamic characteristics of low temperature oxidation for Bohai offshore light oil under reservoir conditions

INVESTIGATION OF AIR INJECTION TO ENHANCED OIL RECOVERY FROM MEDIUM OIL RESERVOIR OF UPPER INDUS BASIN OF PAKISTAN

Experiment on Abiotic Factor Oxygen Consumption of the Reservoir

The impact of the oil character and quartz sands on the thermal behavior and kinetics of crude oil

Evaluation of the subject geological area suitability for oil recovery by High-Pressure Air Injection method

Study on Interaction Characteristics of Injected Natural Gas and Crude Oil in a High Saturation Pressure and Low-Permeability Reservoir

Effects of Air Injection on the Metabolic Activity of Emulsifier-Producing Bacteria from Oil Reservoirs

Study on Development Mechanism of Air Injection in Light Oil Reservoir in Tuha Basin

Investigation on a Wet Oxidation of Crude Oil for Simulation Study of Super-Wet In-Situ Combustion As an EOR

Interfacial Interactions Between Bakken Crude Oil and Injected Gases at Reservoir Temperature: A Molecular Dynamics Simulation Study

Numerical and experimental investigation of production performance of in-situ conversion of shale oil by air injection

Laboratory Assessment and Field Pilot of Near Miscible CO2 Injection for IOR and Storage in a Tight Oil Reservoir of ShengLi Oilfield China

Miscible N2 EOR in a Giant High Temperature Complex Carbonate Reservoir

Microscopic Production Characteristics of Pore Crude Oil and Influencing Factors during Enhanced Oil Recovery by Air Injection in Shale Oil Reservoirs