Abstract:In situ combustion (ISC) has been recently evaluated as a follow-up process to steam assisted gravity drainage (SAGD) with the expectation to combine the advantages of SAGD and ISC. Before the design of such a hybrid process, it is important to understand the chemical reactions between air (or oxygen) and residual oil within a SAGD chamber in the presence of water and steam in order to simulate the process with a reasonable degree of confidence. In this study, an improved reaction: kinetics scheme, in terms of Saturates, Aromatics, Resins, and Asphaltenes (SARA) fractions, is proposed to represent the complex chemical reactions during ramped temperature experiments. From the results of a set of laboratory ramped temperature oxidation (RTO) tests, the oxidation behavior at different temperatures has been carefully analyzed. On the basis of the analysis, a reaction kinetics model consisting of low temperature oxidation, thermal cracking, and high temperature oxidation reactions has been developed. This model has then been incorporated into CMG STARS to simulate RTO experiments. The experimental results of seven RTO tests, including temperature profiles, oxygen consumption, and carbon oxides production, have been successfully matched by tuning kinetic parameters. From the experimental and simulation study, it is found that the coke, which is formed through cracking reactions and traditionally considered to be the main source of fuel in ISC, reacts slowly at high temperatures in the RTO tests. The other source of fuel for combustion in the RTO tests is light hydrocarbons distilled from the original bitumen or cracked from oxidation and cracking reactions. These light hydrocarbons are responsible for the rapid high temperature behavior observed in the RTO tests. This work greatly increases the understanding of fuel sources, and the proposed model is able to predict oxidation/combustion behavior of pre-steamed Athabasca oil sands under a wide range of temperatures.

The impact of the oil character and quartz sands on the thermal behavior and kinetics of crude oil

Experimental study on dynamic characteristics of low temperature oxidation for Bohai offshore light oil under reservoir conditions

Isothermal low-temperature oxidation behavior and kinetics of heavy oil

The Oxidation of Heavy Oil: Thermogravimetric Analysis and Non-Isothermal Kinetics Using the Distributed Activation Energy Model

Experimental Study on Low-Temperature-Oxidation Parameters and Simulations of Exothermic Process during Air Injection in Light Oil Reservoirs

Insights for Air Injection EOR from Static Oxidization Behaviours of Crude Oil

The Oxidation of Heavy Oil to Enhance Oil Recovery: the Numerical Model and the Criteria to Describe the Low and High Temperature Oxidation

Low-temperature oxidation reactions of crude oils using TGA–DSC techniques

Air Injection for Enhanced Oil Recovery: In Situ Monitoring the Low-Temperature Oxidation of Oil through Thermogravimetry/Differential Scanning Calorimetry and Pressure Differential Scanning Calorimetry

Investigation on effect of water on oxidation behaviors and kinetics of heavy crude oil using STA and ARC

Molecular composition of low-temperature oxidation products of the heavy oil

Effects of different clay minerals on thermal conversion of oxidized and pyrolyzed oils during in situ combustion

The Role of Reservoir Mediums in Natural Oil Cracking: Preliminary Experimental Results in a Confined System

Investigation on a Wet Oxidation of Crude Oil for Simulation Study of Super-Wet In-Situ Combustion As an EOR

Influence of Carbonate Minerals on Heavy Oil Oxidation Behavior and Kinetics by TG-FTIR

An Improved Kinetics Model for in Situ Combustion of Pre-Steamed Oil Sands

Catalytic role of various clay minerals during the thermal reaction process with oxidized and pyrolyzed oils

Oil oxidation in the whole temperature regions during oil reservoir air injection and development methods

Heat Release Model for the Low Temperature Oxidation of Heavy Oils from Experimental Analyses and Numerical Simulations

In Situ Combustion Characteristics of Heavy Oil in the Liaohe Oilfield at Different Temperatures

Effects of kaolinite and its thermal transformation on oxidation of heavy oil