Abstract:Abstract In this work, a molecular study of shale EOR is presented to elucidate some controlling parameters, such as soak time, injection pressure, and injection fluid. To create realistic structures for organic nano-porous organic structure, equilibrium molecular dynamics (EMD) is used to create channel-like geometries based on the kerogen type II structure C unit molecules prepared by Ungerer et al. 2014. The atomistic model of the oil residing on the channel is developed using a synthetic oil mixture created based on the experimental study of the phase behavior of petroleum mixtures performed by Turek et al. (1984). N2 and supercritical CO2 (sCO2) molecules are then injected into the channel at different pressures to investigate the effectiveness of this EOR mechanism by computing the oil recovery factors. In the first step, the density profiles of injected gases and synthetic oil in the pore are investigated at various injection pressures to understand the adsorption of different components. Different oil components are shown to have different adsorption tendencies to the channel surfaces. Heavier oil components, particularly C7+, have the highest adsorption tendency, denoted by an adsorption selectivity of six calculated with respect to methane, i.e., six times higher adsorption tendencies compared to methane. In the next step, simulations are performed to investigate the importance of injection pressure on the required soaking time. Soaking time is the time required to allow complete mixing of injection gas with oil. The results show that the higher sCO2 injection pressure, the more soaking time is required for the gas to be efficiently mixed with synthetic oil. Furthermore, there is an optimal soaking time after which no significant oil recovery increments can be achieved. Determining the optimal soak time has economic significance and in extreme cases can determine the faith of an EOR project. Oil recovery factors increase as injection pressures increase but the trend plateaus after reaching an inflection point (called here the minimum diffusivity pressure (MDP), similar to the minimum miscibility pressure (MMP) and minimum miscibility enrichment (MME) defined in conventional reservoirs). Next, a component-wise investigation of the recovery of oil is performed after the EOR fluids are injected. sCO2 molecules tend to be adsorbed to the surfaces of the kerogen pore by replacing (desorbing) the molecules of oil. This phenomenon takes place faster for the lighter oil components compared to the heavier ones. The computed oil recovery factors range from 24 to 49%, which is consistent with the experimental measurements in Jin et al. (2017). The fraction of the heavier components in the recovered oil is smaller than the lighter components especially when N2 is injected as the EOR fluid (maximum 20 and 34% for N2 and sCO2 injection, respectively). A comparison of the oil recovery factors between sCO2 and N2 shows the superiority of the former as the EOR fluid. This is attributed to sCO2 molecules possessing higher diffusivity in oil and also higher adsorption tendencies to the kerogen atoms on the channel walls compared to N2 molecules. This work is one of the few studies on the shale EOR at the molecular level. This work along with the extensions of this work to larger scales can shed light on the highly unknown and complex nature of shale recovery.

Recovery of Adsorbed and Free Oil in Shale Formations by CO2 Injection: an Experimental Study Using 1D- and 2D-NMR

Mechanism of CO2 enhanced oil recovery in shale reservoirs

A numerical simulation study of CO2 injection for enhancing hydrocarbon recovery and sequestration in liquid-rich shales

A Microfluidic Experiment on CO2 Injection for Enhanced Oil Recovery in a Shale Oil Reservoir with High Temperature and Pressure

Advancing CO2 enhanced oil recovery and storage in unconventional oil play—Experimental studies on Bakken shales

Effects of Kerogen on the Flow and EOR Performance of Oil in Shale Cores during CO2 Flooding Process Investigated by NMR Technology

Mechanism of CO 2 enhanced oil recovery in kerogen pores and CO 2 sequestration in shale: A molecular dynamics simulation study

Giant Effect of CO2 Injection on Multiphase Fluid Adsorption and Shale Gas Production: Evidence from Molecular Dynamics

Molecular Simulation of Enhanced Oil Recovery: A Comparison Between Carbon Dioxide and Nitrogen Injection

CO2-Enhanced Radial Borehole Development of Shale Oil: Production Simulation and Parameter Analysis

A systematic review of CO2 injection for enhanced oil recovery and carbon storage in shale reservoirs

Molecular insights into recovery of shale gas by CO2 injection in kerogen slit nanopores

Displacement Mechanism of Oil in Shale Inorganic Nanopores by Supercritical Carbon Dioxide from Molecular Dynamics Simulations

Thermodynamic effects of cycling carbon dioxide injectivity in shale reservoirs

Extraction of shale oil with supercritical CO2: Effects of number of fractures and injection pressure

Exploring pore-scale production characteristics of oil shale after CO2 huff 'n' puff in fractured shale with varied permeability

Experimental investigation of CO2 injection side effects on reservoir properties in ultra tight formations

Evaluation of Multicomponent Adsorption Kinetics for Carbon Dioxide Enhanced Gas Recovery from Tight Shales

Mechanisms of carbon dioxide extracting oil at the boundary layer on shale nanopore surface: insights from molecular dynamics

Molecular Insight into CO2 Improving Oil Mobility in Shale Inorganic Nanopores Containing Water Films

Investigation of the Driving Force of Replacing Adsorbed Hydrocarbons by CO2 in Organic Matter from an Energy Perspective