Abstract:Abstract In this work, a molecular study of shale EOR is presented to elucidate some controlling parameters, such as soak time, injection pressure, and injection fluid. To create realistic structures for organic nano-porous organic structure, equilibrium molecular dynamics (EMD) is used to create channel-like geometries based on the kerogen type II structure C unit molecules prepared by Ungerer et al. 2014. The atomistic model of the oil residing on the channel is developed using a synthetic oil mixture created based on the experimental study of the phase behavior of petroleum mixtures performed by Turek et al. (1984). N2 and supercritical CO2 (sCO2) molecules are then injected into the channel at different pressures to investigate the effectiveness of this EOR mechanism by computing the oil recovery factors. In the first step, the density profiles of injected gases and synthetic oil in the pore are investigated at various injection pressures to understand the adsorption of different components. Different oil components are shown to have different adsorption tendencies to the channel surfaces. Heavier oil components, particularly C7+, have the highest adsorption tendency, denoted by an adsorption selectivity of six calculated with respect to methane, i.e., six times higher adsorption tendencies compared to methane. In the next step, simulations are performed to investigate the importance of injection pressure on the required soaking time. Soaking time is the time required to allow complete mixing of injection gas with oil. The results show that the higher sCO2 injection pressure, the more soaking time is required for the gas to be efficiently mixed with synthetic oil. Furthermore, there is an optimal soaking time after which no significant oil recovery increments can be achieved. Determining the optimal soak time has economic significance and in extreme cases can determine the faith of an EOR project. Oil recovery factors increase as injection pressures increase but the trend plateaus after reaching an inflection point (called here the minimum diffusivity pressure (MDP), similar to the minimum miscibility pressure (MMP) and minimum miscibility enrichment (MME) defined in conventional reservoirs). Next, a component-wise investigation of the recovery of oil is performed after the EOR fluids are injected. sCO2 molecules tend to be adsorbed to the surfaces of the kerogen pore by replacing (desorbing) the molecules of oil. This phenomenon takes place faster for the lighter oil components compared to the heavier ones. The computed oil recovery factors range from 24 to 49%, which is consistent with the experimental measurements in Jin et al. (2017). The fraction of the heavier components in the recovered oil is smaller than the lighter components especially when N2 is injected as the EOR fluid (maximum 20 and 34% for N2 and sCO2 injection, respectively). A comparison of the oil recovery factors between sCO2 and N2 shows the superiority of the former as the EOR fluid. This is attributed to sCO2 molecules possessing higher diffusivity in oil and also higher adsorption tendencies to the kerogen atoms on the channel walls compared to N2 molecules. This work is one of the few studies on the shale EOR at the molecular level. This work along with the extensions of this work to larger scales can shed light on the highly unknown and complex nature of shale recovery.

Molecular insights into recovery of shale gas by CO2 injection in kerogen slit nanopores

Recovery of Adsorbed and Free Oil in Shale Formations by CO2 Injection: an Experimental Study Using 1D- and 2D-NMR

Nanoscale Insights into CO2 Enhanced Shale Gas Recovery in Gas-Water Coexisting Kerogen Nanopores

Mechanism analysis of CO 2 enhanced shale gas exploitation : Competitive Adsorption between CO 2 and CH 4 in Shale Kerogen NanoPores

Dynamic fluid states in organic-inorganic nanocomposite: Implications for shale gas recovery and CO2 sequestration

Evaluation of CO 2 storage and enhanced gas recovery potential in gas shale using kerogen nanopore systems with mesopores and micropores

Giant Effect of CO2 Injection on Multiphase Fluid Adsorption and Shale Gas Production: Evidence from Molecular Dynamics

Mechanism of CO 2 enhanced oil recovery in kerogen pores and CO 2 sequestration in shale: A molecular dynamics simulation study

Enhanced Gas Recovery in Kerogen Pyrolytic Pore Network: Molecular Simulations and Theoretical Analysis

Evaluation of Multicomponent Adsorption Kinetics for Carbon Dioxide Enhanced Gas Recovery from Tight Shales

Molecular Simulation of Carbon Dioxide and Methane Adsorption in Shale Organic Nanopores

Absorption of Carbon Dioxide in Kerogen Nanopores: A Mechanism Study using the Molecular Dynamics Monte Carlo Method

Displacement Mechanism of Oil in Shale Inorganic Nanopores by Supercritical Carbon Dioxide from Molecular Dynamics Simulations

Molecular Simulation of Enhanced Oil Recovery: A Comparison Between Carbon Dioxide and Nitrogen Injection

Enhanced Shale Gas Recovery: Gas Sorption Controls on Recoverable Gas and CO2 Storage Capacity

Mechanisms of CO 2 -rich industrial waste gas enhanced shale oil recovery in kerogen slit based on adsorption behavior, gas flooding and surfactant synergy study

The phase behavior of CO2 injection in shale reservoirs with nano-pores

Competitive Adsorption in CO2 Enhancing Shale Gas: Low-field NMR Measurement Combined with Molecular Simulation for Selectivity and Displacement Efficiency Model

Desorption of CH4/CO2 from kerogen during explosive fracturing

Molecular Insight into CO2 Improving Oil Mobility in Shale Inorganic Nanopores Containing Water Films

Molecular insight into minimum miscibility pressure estimation of shale oil/CO 2 in organic nanopores using CO 2 huff-n-puff