Abstract:Using carbon dioxide as a displacing fluid to increase the recovery ratio, in the enhanced oil recovery (EOR) technique and in shale gas development, is attractive since such potential technique also contributes to carbon dioxide geological storage. Supercritical methane in shale gas reservoirs is either adsorbed on solid shale matrix pore surfaces or stored freely in the pore void spaces. All the shale matrix pores are in nano-scale, in which the organic kerogen pore radii are mostly less than 10 nm. The nano-scale kerogen pores provide huge specific surface area for shale reservoir. The physical property of supercritical methane and carbon dioxide in the nano-pores, such as density and viscosity, is dominated by the influence of complicated solid surface. Considering the complex geometry and chemical components of shale organic nano-pores, it’s nearly impossible to conduct experiment and theoretical analysis. Numerical simulation is a feasible method to research the physical behavior of fluid in such a small scale confined space under high pressure and temperature. Comparing with the methane fluid stored in shale kerogen organic pores, carbon dioxide shows stronger adsorption affinity to shale organic matter because of its intermolecular interaction with the pore surfaces. However, the adsorption/desorption and diffusion behaviors related to real shale gas productions are not well understood in such nano-confined spaces. In this work, we use Molecular Dynamics and Monte Carlo methods to simulate the nano-scale methane/carbon dioxide/kerogen system. Based on a novel molecular simulation workflow, the kerogen pores are constructed using Molecular Dynamics under typical reservoir condition (up to 20 MPa), as illustrated in Fig.1, the geometry and scale of shale pore could be controlled based on cutter atoms method. As the adsorbed state and free state of fluid could be identified directly by density statistical results, the adsorption isothermal is calculated using the grand canonical Monte Carlo simulation results in a single kerogen pore and fitted using competitive adsorption models. The adsorption patterns of methane, carbon dioxide or the mixture of methane and CO2 in the organic pores could be visualized to reveal the adsorption mechanism in shale kerogen, which is shown in Fig.2. As reported in previous research, carbon dioxide shows different adsorption affinity in nano-pores, such as clay split pores, under different reservior pressure and temperature compared with methane. The competitive isothermal adsorption curve of methane and carbon dioxide in shale organic pores is illustrated in Fig.3, which shows that carbon dioxide takes larger proportion of adsorption state fluid than methane under different reservoir pressure and temperature. The mixed fluid of carbon dioxide and methane saturated in shale organic nano-pores shows different physical behavior, carbon dioxide is mainly distributed on the surface of solid and methane occupy the center of nanppores, which also means that carbon dioxide shows stronger adsorption affinity than methane. Replacement ratio is defined to represent how much methane is replaced by carbon dioxide,

Desorption of CH4/CO2 from kerogen during explosive fracturing

Molecular insights into recovery of shale gas by CO2 injection in kerogen slit nanopores

Thermal dynamics in deep shale reservoirs: Influences of the kerogen microstructural behavior on the gas adsorption/desorption capacity

Mechanism of pore expansion and fracturing effect of high-temperature ScCO 2 on shale

Extraction of kerogen from oil shale with supercritical carbon dioxide: Molecular dynamics simulations

Progress and Prospects of Supercritical CO 2 Application in the Exploitation of Shale Gas Reservoirs

Mechanism analysis of CO 2 enhanced shale gas exploitation : Competitive Adsorption between CO 2 and CH 4 in Shale Kerogen NanoPores

Shale permeability and microstructural alternation during CO2 pre-fracturing: A mechanistic study

Thermodynamics and Kinetics of CO 2 / CH 4 Adsorption on Shale from China : Measurements and Modeling

Gas flow characteristics in shale fractures after supercritical CO2 soaking

Nanoscale Insights into CO2 Enhanced Shale Gas Recovery in Gas-Water Coexisting Kerogen Nanopores

Molecular Dynamics of CH4 Adsorption and Diffusion Characteristics Through Different Geometric Shale Kerogen Nanopores

Thermomechanical coupling seepage in fractured shale under stimulation of supercritical carbon dioxide

Evaluation of CO 2 storage and enhanced gas recovery potential in gas shale using kerogen nanopore systems with mesopores and micropores

Pore-Scale Simulation of Fracture Propagation by CO2 Flow Induced in Deep Shale Based on Hydro-Mechanical Coupled Model

Kerogen Differential Swelling during CO 2 -CH 4 Adsorption: Mechanism and Significance

Experimental study on the desorption behavior of high-volatile bituminous coals following CO 2 and CH 4 injection at various compositional ratios

Experimental Study on the Formation and Dissociation Characteristics of Mixed CO 2 + CH 4 Hydrates in Quartz Sand

Shale Microstructure Characteristics under the Action of Supercritical Carbon Dioxide (Sc-CO2)

Flow Transportation Inside Shale Samples During Low Temperature Combustion: the Effect of Desorption and Pyrolysis