Abstract:A cryogenic broadband low noise amplifier (LNA) for quantum applications based on a standard 40-nm CMOS technology is reported. The LNA specifications are derived from the readout of semiconductor quantum bits at 4.2 K, whose quantum information signals are characterized as phase-modulated signals. To achieve broadband input matching impedance and low noise figure, the gate-to-drain capacitance of the input transistor is exploited. The goal is to involve a resistive and capacitive load into the input impedance match of a common-source stage with source inductive degeneration. The capacitive load is created by an LC parallel tank whose resonant frequency is lower than the operating frequency. The achieved non-constant in-band equivalent capacitance is proven to be beneficial to input impedance matching. The resistive part of the load is provided by the transconductance of the cascode stage implicitly. An inductor is added to the gate of the cascode transistor to suppress its noise, and a transformer-based resonator with two resonant frequencies serves as the load of the first stage, thus extending the operating bandwidth. Design considerations for the cryogenic temperature operation of the LNA are proposed and analyzed. The LNA achieves a measured gain ( $S_{21}$ ) of 35 ± 0.5 dB, return loss > 12 dB, and NF of 0.75–1.3 dB across the band (4.1–7.9 GHz), with 51.1-mW power consumption at room temperature, while it shows a measured gain of 42 ± 3.3 dB, and NF of 0.23–0.65 dB with 39-mW power consumption at 4.2 K between 4.6 and 8 GHz. To the best of our knowledge, this is the first report of a cryogenic LNA based on a bulk CMOS process working above 4 GHz showing sub-1-dB NF both at room and cryogenic temperatures.

A 0.01-to-2.6-GHz Two-Fold Current Reuse Dual Noise-Canceling LNA Achieving 6.8-K Noise Temperature for Quantum Applications

A 0.061-Mm² 1–11-Ghz Noise-Canceling Low-Noise Amplifier Employing Active Feedforward with Simultaneous Current and Noise Reduction

A Wideband BiCMOS Thermal Noise Canceling Low Noise Amplifier with Temperature Compensation

A Compact 2.1–39 GHz Self-Biased Low-Noise Amplifier in 65 Nm CMOS Technology

Ultracompact Inductorless Noise-Canceling LNAs in 40-nm CMOS Achieving 2.2-K Noise Temperature for Qubit Readout

Ultralow Power E-Band Low-Noise Amplifier with Three-Stacked Current-Sharing Amplification Stages in 28-Nm CMOS

A 0.0081mm2 0.15–5.9-Ghz Low Noise Amplifier with Noise Cancelling and Current Reuse Techniques

Analysis And Design Of Inductorless Wideband Low-Noise Amplifier With Noise Cancellation Technique

A BiCMOS Implementation of Noise Canceling Low Noise Amplifier for Wideband Applications

A 11.2 Mw 48–62 GHz Low Noise Amplifier in 65 Nm CMOS Technology

A 6.512-GHz Balanced Variable-Gain Low-Noise Amplifier With Frequency-Selective Gain Equalization Technique

A Highly Linear 2.4GHz Low Noise Amplifier

A Cryogenic Broadband Sub-1-dB NF CMOS Low Noise Amplifier for Quantum Applications

A 2.8–10-GHz CMOS Current Reuse Cascaded Linearity Improving Ultra-Wideband Low-Noise Amplifier

A mm‐wave LNA employing current re‐use and non‐linearity cancellation in 28 nm CMOS for automotive RADAR and 6G receivers

A 0.061-mm2 1–11-GHz Noise-Canceling Low-Noise Amplifier Employing Active Feedforward With Simultaneous Current and Noise Reduction

An inductorless wideband low noise amplifier with current reuse and linearity enhancement

Two-Fold Noise-Cancelling Low-Noise Amplifier in 28-nm CMOS

A 23-30 GHz LNA with Noise-Cancelling in 28nm CMOS

Inductorless CMOS Low Noise Amplifier for Multiband Application in 0.1–1.2 GHz

A Ku-Band 3.3-V LNA with Multicoupled Q-Enhancement Transformer and Current-Reuse Techniques in 65-Nm CMOS