Abstract:A high‐performance 85 GHz stacked low noise amplifier is presented, featuring derivative superposition based non‐linearity cancellation. The two‐stage stacked architecture incorporates neutralized differential pairs with an auxiliary branch in parallel to stage 1 for non‐linearity cancellation. Implemented in TSMC 28 nm CMOS, the low noise amplifier achieves 8.4 dB peak gain at 84.2 GHz with 12.6 GHz as 3‐dB bandwidth, drawing 34 mA from a 1.2 V supply. With IIP3 of +6.5 dBm, it is tailored for automotive RADAR and 6G receivers. This letter reports an 85 GHz low noise amplifier (LNA) employing derivative superposition based non‐linearity cancellation and a current re‐use topology. The LNA employs a two‐stage stacked architecture, each featuring neutralized differential pairs utilizing the same DC current. In derivative superposition, an auxiliary branch consisting of neutralized differential pairs cells is added in the LNA in parallel to stage 1 to ensure non‐linearity cancellation. Layout‐based capacitive neutralization is implemented to improve GMAX, resulting in simplified routing, reduced parasitics, and a more compact layout. The proposed LNA is fabricated in TSMC 28 nm CMOS process and achieves a peak gain of 8.4 dB at 84.2 GHz with a measured 3 dB bandwidth (BW3dB ) from 79.4 to 92 GHz. The minimum measured noise figure is 12.8 dB. The LNA draws 34 mA of DC current from a 1.2 V supply. The highly linear LNA with IIP3 +6.5 dBm is tailored for automotive RADAR and 6G receivers.

A mm‐wave LNA employing current re‐use and non‐linearity cancellation in 28 nm CMOS for automotive RADAR and 6G receivers

A 0.061-Mm² 1–11-Ghz Noise-Canceling Low-Noise Amplifier Employing Active Feedforward with Simultaneous Current and Noise Reduction

A 11.2 Mw 48–62 GHz Low Noise Amplifier in 65 Nm CMOS Technology

A 6.512-GHz Balanced Variable-Gain Low-Noise Amplifier With Frequency-Selective Gain Equalization Technique

A High-Linearity 7–9-Ghz Receiver Front End with Strength-Oriented Nonlinearity Cancellation

A Compact 2.1–39 GHz Self-Biased Low-Noise Amplifier in 65 Nm CMOS Technology

A Highly Linear 2.4GHz Low Noise Amplifier

Analysis and Design of Ultra-Wideband Low-Noise Amplifier with Input/Output Bandwidth Optimization and Single-Ended/Differential-Input Reconfigurability.

Ultralow Power E-Band Low-Noise Amplifier with Three-Stacked Current-Sharing Amplification Stages in 28-Nm CMOS

A 52-to-73GHz Tri-Coupled Transformer Based Noise Self-Canceling and Gm-Boosting LNA with 3.78dB NF and 22.4dB Gain in 40nm CMOS

A High Gain and High Linearity Current‐reused CMOS LNA Using Modified Derivative Superposition Technique with Bulk‐bias Control

A 0.0081mm2 0.15–5.9-Ghz Low Noise Amplifier with Noise Cancelling and Current Reuse Techniques

Analysis And Design Of Inductorless Wideband Low-Noise Amplifier With Noise Cancellation Technique

A 2.8–10-GHz CMOS Current Reuse Cascaded Linearity Improving Ultra-Wideband Low-Noise Amplifier

A 23-30 GHz LNA with Noise-Cancelling in 28nm CMOS

A 0.01-to-2.6-GHz Two-Fold Current Reuse Dual Noise-Canceling LNA Achieving 6.8-K Noise Temperature for Quantum Applications

A 6-18Ghz Low-Noise Amplifier Using Noise Canceling Technique in 130-Nm CMOS PD-SOI.

A 0.061-mm2 1–11-GHz Noise-Canceling Low-Noise Amplifier Employing Active Feedforward With Simultaneous Current and Noise Reduction

Two-Fold Noise-Cancelling Low-Noise Amplifier in 28-nm CMOS

An Inductor-Less Highly Linear LNA with Noise Cancelling and Current Reusing for 3–5 GHz Low-Power UWB Receivers

Wideband Inductorless Low-Power LNAs with Gm Enhancement and Noise-Cancellation.