Abstract:Abstract Introduction The absorption of radiofrequency (RF) energy during an MRI procedure may cause tissue heating in the vicinity of an implanted device, such as a stent or a stented valve, potentially causing patient harm. Computational modeling and simulation (M&S) can be used by medical device manufacturers to assess the RF-induced heating of implanted devices during an MRI scan and identify worst-case configurations within a given line of implants. However, despite the use of in-silico tools, a standard for in-silico testing of such problematic is still missing; The tool here proposed is a web-based application that automates the set-up and solution of RF-heating analysis, in line with existing standards for in-vitro testing. Methods The presented tool is part of a commercial web-based platform. The tool was developed in collaboration with the market leader of computer-aided engineering software and as part of a Research Collaboration Agreement with the American regulatory body. Commercial software was used to compute RF energy absorption and thermal heating of implantable medical devices replicating the directives of the ASTM F2182–11a Standard Test Method. The model is integrated in an automated workflow. Each simulation submitted by the user is sent to the cloud infrastructure for solution. Simulation results are stored in a database for later retrieval and report generation. Results The tool consists of a web-interface where the user can: i) upload the medical device computer-aided design (CAD) or select a simplified geometry from a library; ii) define the material properties of the device; ii) specify the desired input parameters specific to an MRI exposure scenario. Specifically, it is possible to study the device exposure: i) at different field frequencies (i.e., 64 MHz and 128 MHz); ii) at different powers (i.e., 2, 4 and 10 W/kg Whole body Specific Absorption Rate - SAR); iii) at different field polarizations (i.e., two circular and two linear); and iv) for different exposure time (i.e., form 240 s to 900 s). The presented tool allows the users to view and export results for each simulation, including electromagnetic fields, local SAR, and the temperature rise over time. Finally, the simulation results are summarized in an automatically generated report that follows regulatory guidance on M&S reporting. Conclusion The presented web-based M&S tool allows users to perform the thermal safety assessment of implantable medical devices during an MRI procedure following established good simulation practices. Minimal training or background in computer modeling is required to use the tool. Specific potential applications of the tool include RF-heating assessment of cardiovascular devices (e.g., stents, stented valves, stent retrievers). The proposed platform promotes the broader adoption of digital evidence in preclinical trials for RF safety analysis, supporting the device submission process and pre-market regulatory evaluation. Stent safety simulation result interface Funding Acknowledgement Type of funding source: None

An in silico testbed for fast and accurate MR labeling of orthopedic implants

An automated computational tool to study MRI safety of implanted passive cardiovascular medical devices

Wirelessly interfacing sensor-equipped implants and MR scanners for improved safety and imaging

A Target Field Design of Open Multi-Purpose RF Coil for Musculoskeletal MR Imaging at 3 T

Development and evaluation of a numerical simulation approach to predict metal artifacts from passive implants in MRI

Numerical approach to investigate MR imaging artifacts from orthopedic implants at different field strengths according to ASTM F2119

A new method to improve RF safety of implantable medical devices using inductive coupling at 3.0 T MRI

Safety Study of Implant Wearers in MRI RF Field Environment

Constructing a Digital Twin of the Birdcage Coil in an MR Scanner by Map Matching: For Radio Frequency Heating Evaluation of Implantable Medical Devices

Design, Evaluation, and Implementation of a Novel Magnetic Resonance Imaging-Compatible Physiologic Loading Simulator for Ex-Vivo Joints

In silico assessment of collateral eddy current heating in biocompatible implants subjected to magnetic hyperthermia treatments

A Novel Device Model Validation Strategy for 1.5- and 3-T MRI Heating Safety Assessment

Development, validation, and pilot MRI safety study of a high-resolution, open source, whole body pediatric numerical simulation model

Metal artefact reduction sequences for a piezoelectric bone conduction implant using a realistic head phantom in MRI

Mechanical soft tissue property validation in tissue engineering using magnetic resonance imaging experimental research

Single-sided magnetic resonance-based sensor for point-of-care evaluation of muscle

[Research on Construction of Test Environment for Assessment of RF-Induced Heating Effects of Implants]

Implantable, Bioresorbable Radio Frequency Resonant Circuits for Magnetic Resonance Imaging

Electromagnetic Modeling of the Implantable Electrode for Transfer Function Calibration in MRI RF-Induced Heating Assessment

Parallel transmission medical implant safety testbed: Real-time mitigation of RF induced tip heating using time-domain E-field sensors

Improved metal suppression using new generation low-field MRI: a biophantom feasibility study