Abstract:Abstract Introduction The absorption of radiofrequency (RF) energy during an MRI procedure may cause tissue heating in the vicinity of an implanted device, such as a stent or a stented valve, potentially causing patient harm. Computational modeling and simulation (M&S) can be used by medical device manufacturers to assess the RF-induced heating of implanted devices during an MRI scan and identify worst-case configurations within a given line of implants. However, despite the use of in-silico tools, a standard for in-silico testing of such problematic is still missing; The tool here proposed is a web-based application that automates the set-up and solution of RF-heating analysis, in line with existing standards for in-vitro testing. Methods The presented tool is part of a commercial web-based platform. The tool was developed in collaboration with the market leader of computer-aided engineering software and as part of a Research Collaboration Agreement with the American regulatory body. Commercial software was used to compute RF energy absorption and thermal heating of implantable medical devices replicating the directives of the ASTM F2182–11a Standard Test Method. The model is integrated in an automated workflow. Each simulation submitted by the user is sent to the cloud infrastructure for solution. Simulation results are stored in a database for later retrieval and report generation. Results The tool consists of a web-interface where the user can: i) upload the medical device computer-aided design (CAD) or select a simplified geometry from a library; ii) define the material properties of the device; ii) specify the desired input parameters specific to an MRI exposure scenario. Specifically, it is possible to study the device exposure: i) at different field frequencies (i.e., 64 MHz and 128 MHz); ii) at different powers (i.e., 2, 4 and 10 W/kg Whole body Specific Absorption Rate - SAR); iii) at different field polarizations (i.e., two circular and two linear); and iv) for different exposure time (i.e., form 240 s to 900 s). The presented tool allows the users to view and export results for each simulation, including electromagnetic fields, local SAR, and the temperature rise over time. Finally, the simulation results are summarized in an automatically generated report that follows regulatory guidance on M&S reporting. Conclusion The presented web-based M&S tool allows users to perform the thermal safety assessment of implantable medical devices during an MRI procedure following established good simulation practices. Minimal training or background in computer modeling is required to use the tool. Specific potential applications of the tool include RF-heating assessment of cardiovascular devices (e.g., stents, stented valves, stent retrievers). The proposed platform promotes the broader adoption of digital evidence in preclinical trials for RF safety analysis, supporting the device submission process and pre-market regulatory evaluation. Stent safety simulation result interface Funding Acknowledgement Type of funding source: None

Intramyocardial administration of chimeric ephrinA1‐Fc promotes tissue salvage following myocardial infarction in mice

Power Absorption of Milliscaled Implants in Alternating Magnetic Field for Magnetically Induced Hyperthermia

Influence of coil geometry, supply conditions and nanoparticle heating properties on magnetic hyperthermia in mouse models

Preoperative Treatment Planning Method for Magnetically Induced Hyperthermia Using Thermoseeds

3-D Numerical Study on the Induced Heating Effects of Embedded Micro/nanoparticles on Human Body Subject to External Medical Electromagnetic Field.

Electromagnetic Heating of Breast Tumors in Interventional Radiology: In Vitro and in Vivo Studies in Human Cadavers and Mice

A Validated Methodological Approach to Prove the Safety of Clinical Electromagnetic Induction Systems in Magnetic Hyperthermia

Echinocandins: addressing outstanding questions surrounding treatment of invasive fungal infections.

An automated computational tool to study MRI safety of implanted passive cardiovascular medical devices

Iron-Oxide Nanoparticles Embedded in 3D-Printed PLA/HA Scaffolds for Magnetic Hyperthermia Therapy: An Experimental–Numerical Analysis of Thermal Behavior

Safety Study of Implant Wearers in MRI RF Field Environment

Nanomagnetic Actuation of Hybrid Stents for Hyperthermia Treatment of Hollow Organ Tumors

Local moderate magnetically induced hyperthermia using an implant formed in situ in a mouse tumor model

Uncertainties in the Micro/nano-Particles Induced Hyperthermia Treatment on Tumor Subject to External EM Field

Approaching the Physical Limits of Specific Absorption Rate in Hyperthermia Applications

Investigation of Artifacts and Optimization in Proton Resonance Frequency Thermometry Towards Heating Risk Monitoring of Implantable Medical Devices in Magnetic Resonance Imaging.

Numerical assessment of induced electric fields in a worker's hand with commonly used metallic implants under exposure to low frequency magnetic fields.

Design and Modelling of an Induction Heating Coil to Investigate the Thermal Response of Magnetic Nanoparticles for Hyperthermia Applications

Theoretical Evaluations of Magnetic Nanoparticle-Enhanced Heating on Tumor Embedded with Large Blood Vessels During Hyperthermia

A Network Intrusions Detection System based on a Quantum Bio Inspired Algorithm

On the magnetic nanoparticle injection strategy for hyperthermia treatment