Abstract:Colossal permittivity ceramic materials (CP, >10 3 ) have the potential of miniaturization and convenience for electric components. Unfortunately, they are often accompanied by high dielectric loss (>0.5), which limits their application. In this work, Ti 1- x (Tm 0.5 Nb 0.5 ) x O 2 (TTNO x ) ceramics are prepared via the solid state method. The results show that the main phase of doped samples maintains the rutile TiO 2 phase and the average grain size decreases with increasing additive amounts. Gradually, the Tm 2 Ti 2 O 7 phase appears and subsequently it is converted to the TmNbTiO 6 phase. Furthermore, the low dielectric loss and colossal permittivity are synchronously achieved in doped ceramic samples by defect regulation. Especially, high permittivity of ∼1.61 × 10 5 , low dielectric loss of ∼0.078 (1 kHz) and the AC resistivity of ∼10 −9 s/cm are achieved in x = 0.01 samples at room temperature with good frequency and temperature stability. The true origin is deeply discussed by some analyses of XRD, XPS, SEM, Raman spectra and the complex impedance. The results show that enhanced dielectric performance originates from this fact that the addition of Nb and Tm ions triggers defective dipoles formation in grains, such as TiTi′/TmTi′−VO..−TiTi′/TmTi′ , TiTi′/TmTi′−NbTi∙ , pinning the electron and limiting its long-range transition. Furthermore, the grain boundary resistivity is crucial to the ceramic conductivity. This study has driving implications for the application of colossal permittivity ceramic materials.

Reduce the low-frequency dielectric loss of (In0.5Nb0.5)0.05Ti0.95O2 ceramics by constructing insulating ZrO2 phase boundaries

Influence of SiO2-adding on microstructure and dielectric properties of (In0.5Nb0.5)0.05Ti0.95O2 ceramics

A new acceptor-donor co-doping TiO 2 -based ceramics with superior dielectric property and insulation performance

Enhanced dielectric properties and improved thermal stability in TiO 2 -based ceramics by Cu and Nb co-doping

Bismuth Oxide Modified Europium and Niobium Co-Doped Titanium Dioxide Ceramics: Colossal Permittivity and Low Dielectric Loss Design

Low-loss Insulating-Conductive Ceramic Composite with Giant Permittivity and High Permeability Using Glass Phase As Separating Layer

Grain Boundary Effect on Dielectric Properties of (nd0.5nb0.5) Ti1-O2 Ceramicsceamics

Improving Multifunctional Performance of Dy-doped (ba0.85ca0.15)(zr0.1ti0.9)o< Sub>3 Ceramics Via Tailoring Dy-doping Amount and Ceramic Processing

The Effect of TiO2 on the Dielectric Performance of ZrO2 and Nb2O5 Pre-Doped CaCu3Ti4O12 Ceramics

Colossal Permittivity and Ultralow Dielectric Loss in Nb-doped SrTiO 3 Ceramics

Thermal stable and ultralow dielectric loss in (Gd0.5Ta0.5) Ti1-O2 giant permittivity ceramics by defect engineering

Microstructure, Raman Spectroscopy, THz Time Domain Spectrum and Microwave Dielectric Properties of Li2Ti1-(Zn1/3Ta2/3) O3 Ceramics

Simultaneously Achieved Ultrastable Dielectric and Energy Storage Properties in Lead-Free Bi0.5Na0.5TiO3-Based Ceramics

High dielectric permittivity and ultralow dielectric loss in Nb-doped SrTiO 3 ceramics

Dielectric Responses of (Zn0.33Nb0.67) x Ti1- xO2 Ceramics Prepared by Chemical Combustion Process: DFT and Experimental Approaches

Effect of annealing temperature on the microstructure, dielectric, and microwave absorption performance of precursor blends derived ZrSiOCN ceramics

Influence of inhomogeneous doping on chemical bond properties, microstructure, and terahertz dielectric performances of LTCC-capable ZnNb2O6 systems

Enhanced dielectric performance of Niobium and Thulium modified rutile TiO 2 ceramics by defect regulation

Influence of Y2O3 Doping on Phase Evolution and Dielectric Characteristics of ZrO2 Ceramics

High Permittivity in Zr Doped NiO Ceramics

Defect-related broadband dielectric loss mechanisms of Na<sub>1/2</sub>Sm<sub>1/2</sub>Ti<sub>1-z</sub>(Al<sub>1/2</sub>Nb<sub> 1/2</sub>)zO<sub>3</sub> ceramics