Abstract:A series of nanofibrous alumina materials with diameters of 4-6 nm and with different aspect ratios ranging from 3 to 16 were prepared. Cobalt impregnated catalysts were prepared by means of incipient wetness impregnation on alumina nanofibers while the 'rearranged' catalysts were prepared by using ultrasonication assistance to mix the fibers with the Co3O4 nanoparticles. The effects of the alumina nanofiber aspect ratios on the Co catalyst structure and performance for Fischer-Tropsch synthesis were studied. The pore size of the two series of catalysts increased as the aspect ratio of the alumina nanofiber increased. For impregnated catalysts, large Co3O4 particles were formed on the external surface of the alumina support when the aspect ratio was 3 and 5, while the crystallite sizes of Co3O4 increased from 13.3 nm to 15.6 nm with the increase of the aspect ratio from 7 to 16. The four 'rearranged' catalysts possessed similar and homogeneously dispersed Co3O4 crystallites of 9.5 nm. As expected the reduction behavior of the two series of catalysts was primarily influenced by the Co3O4 crystallite size and structure. The FT data of the two series of catalysts indicate that dispersed Co catalysts on alumina nanofibers with large aspect ratios having large inter-crystallite pores significantly improve the catalyst activity and C5+ selectivity. The FT data of the 'rearranged' catalysts strongly demonstrated that the internal mass transfer of reactants and products increased with a decrease in inter-crystallite pore size, resulting in a decrease of C5+ selectivity and C3 olefin/paraffin ratio, and an increase of CH4 selectively, while the CO consumption rate was little altered. Furthermore, catalytic stability tests showed that the alumina nanofibers with larger aspect ratios inhibited Co migration and coalescence in the matrices of the nanofibrous alumina, and this significantly enhanced the stability of the catalyst. The Cop/Al2O3-16 catalyst possessing uniformly distributed cobalt, improved reducibility and large pores is the preferred choice to generate high catalytic activity, stability and C5+ selectivity.

Impact of Co impregnation on 3D printed alumina supports and effects on Fischer-Tropsch reaction

Direct ink writing of Pd-Decorated Al<sub>2</sub>O<sub>3</sub> ceramic based catalytic reduction continuous flow reactor

3D printed Ni/Al2O3 based catalysts for CO2 methanation - a comparative and operando XRD-CT study

Towards unconstrained catalyst shaping: high accuracy DLP printing of porous γ-Al2O3-based catalysts

Exploring the 3D printing of molybdenum carbide-based catalysts for the reverse water gas shift reaction: A multi scale study

Influencing Factors on the Wet Impregnation of Additive‐Manufactured Catalyst Support Structures

Chemical etching optimization of 3D printed α-Al 2 O 3 monoliths to enhance the catalytic applications

Mass Transfer Enhancement and Drying Mechanism of High Adhesion Saturated Impregnated Co-Al2O3 Monolithic Catalyst

Design and catalytic performance of Ni catalyst for CO 2 methanation based on DIW-3D printing

Development of a manufacturing process for Binder Jet 3D printed porous Al2O3 supports used in heterogeneous catalysis

Tailored monolithic catalyst and reactor by direct photo-curing 3D printing for oxidative desulfurization of fuels

Effects of preparation variables on an alumina-supported FeCuK Fischer–Tropsch catalyst

Optimization of the sintering thermal treatment and the ceramic ink used in direct ink writing of α-Al2O3: Characterization and catalytic application

Effect of Component Impregnation Sequence on Catalytic Performance of Ru-Co-ZrO2/γ-Al2O3 Catalyst for Fischer-Tropsch Synthesis

Metal 3D printing technology for functional integration of catalytic system

Pretreatment of Alumina and Its Influence on the Properties of Co/Alumina Catalysts for Fischer-Tropsch Synthesis

Novel ceramic supports for catalyst with hierarchical pore structures fabricated via additive manufacturing-direct ink writing

Chemical Imaging of Carbide Formation and Its Effect on Alcohol Selectivity in Fischer Tropsch Synthesis on Mn-Doped Co/TiO2 Pellets

Preparation of a High-Precision Gama-Al2O3 Structured Catalyst by DLP 3D Direct Printing for Hydrogen Production from Methanol

3D Printing and Chemical Dealloying of a Hierarchically Micro- and Nanoporous Catalyst for Wastewater Purification

The Effect of the Nanofibrous Al2O3 Aspect Ratio on Fischer-Tropsch Synthesis over Cobalt Catalysts.