Optimal Design of Gerotor Profile with Lemniscate Lobe Shape for Noise Reduction
Changhyun Lee,Hyoseong Jang,Hyoseo Kwak,Gunyoung Park,Chul Kim
DOI: https://doi.org/10.1007/s12541-021-00562-6
IF: 2.0411
2021-08-17
International Journal of Precision Engineering and Manufacturing
Abstract:Since gerotor oil pump has a simple structure and has a higher discharge per cycle than other types of pumps with the same size, it has advantage for miniaturization, so it is widely used as the source of lubricant for engine lubrication of automobiles or as the hydraulic source of automatic transmissions. In order to improve the fuel efficiency and reduce the noise of gerotor oil pumps, optimization of the tooth profile is required. Thus, in this study, 2-Ex_Lemniscates; 2-expanded lemniscates curve, was developed as a new lobe shape, and theoretical equations for generating a rotor profile used as the tooth profile of the outer rotor were derived. In addition, new algorithm has removed 'cusp' generated in outer rotor and made uniform clearance between outer and inner rotors by applying translational movement of the x and y axes along with the expansion and rotation, and using automatic design program, optimal profile was proposed based on the analysis of performance parameters for about 2.6 million tooth profiles. The experimental results showed that the developed 2-Ex_Lemniscates oil pump showed that the flow rate at 2500 rpm was increased by about 2.9%, and average SPL (2000–3000 rpm) and pressure irregularity were decreased by 3.3% and 16.9%, respectively.
engineering, mechanical, manufacturing