Abstract:Graphical The new CuO–(Y2O3)0.4(CeO2)0.2 catalyst has high specific surface area and developed pore structure and exhibits excellent low CO selectivity and high H2 selectivity in methanol steam reforming (MSR) process, which is expected to provide a reference for large‐scale industrial hydrogen production. Compared with the relatively simple monometallic and bimetallic oxide catalytic systems, polymetallic catalysts have attracted much attention in recent years. CuO–(Y2O3)(1−x)/2(CeO2)x (x = 0, 0.2, 0.4, 0.6, 0.8, and 1) polymetallic catalyst for hydrogen production by methanol steam reforming(MSR) was prepared by sol–gel method and characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy, X‐ray photoelectron spectroscopy (XPS), and Specific surface area and pore size analyser(BET) techniques. XRD results show that the diffraction peaks of CuO–(Y2O3)0.4(CeO2)0.2 are sharp and intense, indicating that it is highly crystalline. SEM results show that the pore structure of catalyst becomes loose with the increase of Ce doping amount, and the catalyst particles become more uniform in size and more loose in shape. The BET results show that compared with other catalysts, CuO–(Y2O3)0.4(CeO2)0.2 catalyst has larger specific surface area, which improves the catalytic performance. XPS results showed that CuO–(Y2O3)0.4(CeO2)0.2 still had catalytic activity after reduction treatment. The results of MSR showed that the doping amount of cerium and the reaction conditions affected the catalytic performance of the catalyst. Ce doping promoted the synergistic effect of Cu and Y, and the hydrogen production of CuO–(Y2O3)0.4(CeO2)0.2 was the highest (about 6.74 × 10−3 mol/min/gcat). Ce doping leads to the change of CO/CO2 selectivity in gas products. The CO selectivity of CuO–(Y2O3)0.4(CeO2)0.2 catalyst is only 2% under the catalytic conditions of 400°C, W/M 4:1, and LHSV 20 h−1, which shows good catalytic activity.

The role of samarium on Cu/Al2O3 catalyst in the methanol steam reforming for hydrogen production

Hydrogen Production Via Steam Reforming of Methanol on Cu/ZnO/Al2O3 Catalysts: Effects of Al2O3 Precursors

The Cu-Al2O3 Interface: an Unignorable Active Site for Methanol Steam Reforming Hydrogen Production

Designing Cu0−Cu+ dual sites for improved C−H bond fracture towards methanol steam reforming

Hydrogen production via steam reforming of methanol using Cu/ZnO/Al 2 O 3 : Effect of catalyst synthesis method and Cu to Zn molar ratio on physico-chemical properties and catalytic performance

Cu0-Cu+ synergistic catalysis towards C-H bond fracture in methanol reforming with extremely-high hydrogen production

Fe–Ni–Ce–Zr-modified CuO–ZnO catalyst for methanol steam reforming

Syntheses, catalytic performances and DFT investigations: A recent review of copper-based catalysts of methanol steam reforming for hydrogen production

Effect of preparation method on the hydrogen production from methanol steam reforming over binary Cu/ZrO2 catalysts

Hydrogen Production via Methanol Steam Reforming over CuO/ZnO/Al2O3 Catalysts Prepared via Oxalate-Precursor Synthesis

Highly Effective Hydrogen Production From Steam Reforming Of Methanol Over Sba-15-Modified Cu/Zno/Al2o3 Catalysts

A Highly Efficient Cu/Zno/Al2o3 Catalyst Via Gel-Coprecipitation of Oxalate Precursors for Low-Temperature Steam Reforming of Methanol

Achieving strong thermal stability in catalytic reforming of methanol over in-situ self-activated nano Cu2O/ZnO catalyst with dual-sites of Cu species

Catalysis of Reforming Methanol Steam for Generation of Hydrogen over Au/La2O3/TiO2 Catalyst

Methanol Reforming over Cu-Ce-Al Catalysts Prepared by Solution Combustion Synthesis Method

Improved charge transfer and morphology on Ti-modified Cu/γ-Al 2 O 3 /Al catalyst enhance the activity for methanol steam reforming

Improved hydrogen production performance from methanol steam reforming by Ce‐doped CuO–Y2O3 catalysts

Promotional effect of samarium on the activity and stability of Ni-SBA-15 catalysts in dry reforming of methane

Review on Copper and Palladium Based Catalysts for Methanol Steam Reforming to Produce Hydrogen

A composite having a porous substrate and polyhedral Cu-Fe oxide nanoparticles showing high catalytic activity during the steam reforming of methanol at low temperatures

Effect of Si/Al Ratio of Mesoporous Support on the Structure Evolution and Catalytic Performance of the Cu/Al-HMS Catalyst