An ASIC for Gripper Finger Haptic Force Feedback in Minimally Invasive Surgery

Han Jin,Jianzheng Li,Xiongchuan Huang,Yajie Qin

DOI: https://doi.org/10.1109/TBCAS.2023.3252026

Abstract:In this article, we present an application specific integrated circuit (ASIC) for gripper finger haptic force feedback in minimally invasive surgery (MIS). It consists of a driving current source, a sensing channel, a digital to analog converter (DAC), a power management unit (PMU), a clock generator and a digital control unit (DCU). The driving current source features a 6-bit DAC to provide a temperature-insensitive current from 0.27 mA to 1.15 mA for the sensor array. The sensing channel contains a programmable instrumentation amplifier (PIA), a low-pass filter (LPF), an incremental analog-to-digital converter (ADC) with its input buffer (BUF). The gain of the sensing channel ranges from 2.76 to 140. The DAC generates a tunable reference voltage to compensate possible sensor array offset. The input referred noise of the sensing channel is around 3.6 μVrms at a sampling rate of 850S/s. A custom 2-wire communication protocol is implemented to support two chips on gripper fingers operating in parallel with low latency, ensuring real-time surgical condition estimation for surgeons. Manufactured in the TSMC 180nm CMOS technology, this chip occupies only 1.37 mm2 core area, and the entire system requires only 4 wires (including power / ground) to operate. Combined with its high accuracy, low latency, and high integration level, this work allows real-time, high-performance haptic force feedback with compact system size, particularly suitable for MIS applications.