Abstract:Resistive, magnetoresistive and magnetic properties of four kinds of pressed CrO2 powders, synthesized by hydrothermal method of chromic anhydride have been investigated. The particles in powders constituted of rounded particles (diameter 120 nm) or needle-shaped crystals with an average diameter of 22.9 nm and average length of 302 nm. All of the particles had a surface dielectric shell of varying thickness and different types (such as oxyhydroxide -CrOOH or chromium oxide Cr2O3). For all the samples at low temperatures we found non-metallic temperature dependence of resistivity and giant negative magnetoresistance (MR). The maximum value of MR at low temperatures (T \approx 5 K) is \approx 37% in relatively small fields (0.5 T). At higher temperatures there was a rapid decrease of MR (up to \approx 1% / T at T \approx 200 K). The main objective of this work was studying the influence of properties and thickness of the intergranular dielectric layers, as well as CrO2 particle shape, on the magnitude of the tunneling resistance and MR of the pressed powder. The new results obtained in this study include: (1) detection at low temperatures in powders with needle-like particles a new type of MR hysteresis, and nonmonotonic MR behaviour with increasing magnetic field (absolute value of the MR at first grows rather rapidly with the field, and then begins diminishing markedly, forming a maximum), and (2) detection of non-monotonic temperature dependence, where - a field in which the resistance in a magnetic field has a maximum, as well as finding discrepancies in values of and coercivity fields, (3) detection of the anisotropy of MR, depending on the relative orientation of the transport current and the magnetic field, (4) a new method of synthesis, to regulate the thickness of dielectric coating.

CVD of CrO2 Thin Films: Influence of the Deposition Parameters on their Structural and Magnetic Properties

CVD of CrO2: towards a lower temperature deposition process

Low Resistivity Transparent Conducting CdO Thin Films Deposited by DC Reactive Magnetron Sputtering at Room Temperature

Argon assisted chemical vapor deposition of CrO$_2$: an efficient process leading to high quality epitaxial films

Ab Initio Electronic Structure of CrO 2

Chromium oxide films fabricated by Cr(CO)6 chemical vapor deposition

Mechanical and Optical Properties of Cr2O3 Thin Films Grown by Atomic Layer Deposition Method Using Cr(thd)3 and Ozone

Ab Initio Electronic Structure Of Cro2

Ab initio study of magnetic structure and chemical reactivity of Cr2O3 and its (0001) surface

Observation of room temperature ferromagnetism in transition metal ions substituted p-type transparent conducting oxide Cr2O3 thin films

Ca2RuO4 Thin Film Growth by Pulsed Laser Deposition

CHARACTERIZING CRYSTALLINE CHROMIUM OXIDE THIN FILM GROWTH PARAMETERS

Growth Temperature Dependent Evolutions of Microstructural, Optical and Magnetic Properties of Zn0.75Co0.25O Films

Grapheme-to-Phoneme Conversion using Multiple Unbounded Overlapping Chunks

Resistive and magnetoresistive properties of CrO2 pressed powders with different types of inter-granular dielectric layers

TEM characterization of an epitaxial CrO 2 film deposited by the CVD method and the transition interface

Structure and Magnetic Properties of Co80Cr20/Ti90Cr10 Film Prepared by Pulsed-Laser Deposition

Effect of deposition temperature on structural, microstructural and magnetic properties of CoFe2O4 thin films deposited by pulsed laser deposition

Atomic layer deposition of chromium oxide—An interplay between deposition and etching

High-Pressure Magnetic Properties and Electrical Transport Behaviors of Half-Metallic Ferromagnet CrO2

Effects of substrate temperature and oxygen pressure on the magnetic properties and structures of CoFe2O4 thin films prepared by pulsed-laser deposition