Abstract:Accuracy detection for five-axis numerical control (NC) machine tools that can truly reflect their practical machining precision is of crucial importance. Standard test pieces are commonly employed for this purpose. However, poor accuracy detection performance is obtained when the test pieces used here are applied to five-axis NC machine tools. This paper introduces a new S-shaped test piece that is exclusively designed for the precision detection of five-axis NC machine tools. The S-shaped test piece integrates numerous characteristics associated with aviation parts and has been widely adopted by machine tool makers. This article presents a numerical model of the latest S-shaped test piece and shows that its side surfaces represent typical undevelopable ruled surfaces. The curvature changes along the ruled lines inevitably produce a theoretical error. Thus, machining methods seek to reduce the theoretical error as much as possible. Based on basic summaries of five existing positioning algorithms, a novel algorithm is proposed to position the tool head using three points, wherein two are tangential to the top and bottom boundary curves, respectively, and the third is tangential to the midpoint of the ruled line. The proposed positioning algorithm together with five existing positioning algorithms is applied to the S-shaped test piece, and a numerical error performance analysis is conducted. The results indicate that the machined surface reduces the theoretical error by at least 96% compared to all the existing numerical positioning algorithms except for Redonnet's algorithm. Compared with Redonnet's algorithm, the accuracy of the proposed algorithm is equivalent, although the proposed algorithm reduces the calculation time by 62.7%, and is not sensitive to the initial values. Hence, the computational process demonstrates that the proposed method is efficient, robust, and universal. Finally, simulation results were confirmed through an actual machining experiment.

Angular error measurement of workpiece repositioning using a full-scale rotation detection method

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

A New Error Measurement Method to Identify All Six Error Parameters of A Rotational Axis of A Machine Tool

Embedded displacement measuring device based on error separating technique of multi-circle overlapping three-probe method

Positioning Method for Complex Construction of Workpieces Based on Deflection Measurement Technology

Error identification and compensation for a laser displacement sensor based on on-machine measurement

Online approach to measuring relative location of spatial geometric features of long rotating parts

Sest: A New Error Separation Technique for Ultra-High Precision Roundness Measurement

Laser measurement and analysis of reposition error in polishing systems

A Measurement and Separation Method for Perpendicular Errors of Rotary Axes

Determining rotating tool-tip FRFs by measuring holder-point FRFs based on a robust frequency-based substructure method

In-Situ Measurement and Slow-Tool-Servo Compensation Method of Roundness Error of a Precision Mandrel

High precision roundness measurement with two chromatic confocal sensors

A systematic error modeling and separation method for the special cylindrical profile measurement based on 2-dimension laser displacement sensor

An Afm-Based Methodology for Measuring Axial and Radial Error Motions of Spindles

An Improved Positioning Method for Flank Milling of S-shaped Test Piece

Three-Probe Error Separation with Chromatic Confocal Sensors for Roundness Measurement

Modeling, identification, and measurement of geometric errors for a rotary axis of a machine tool using a new R-test

Fiducial-aided Calibration of a Displacement Laser Probing System for In-Situ Measurement of Optical Freeform Surfaces on an Ultra-Precision Fly-Cutting Machine.