Abstract:To treat cardiovascular diseases (i.e., a major cause of mortality after cancers), endovascular-technique-based guidewire has been employed for intra-arterial navigation. To date, most commercially available guidewires (e.g., Terumo, Abbott, Cordis, etc.) are non-steerable, which is poorly suited to the human arterial system with numerous bifurcations and angulations. To reach a target artery, surgeons frequently opt for several tools (guidewires with different size integrated into angulated catheters) that might provoke arterial complications such as perforation or dissection. Steerable guidewires would, therefore, be of high interest to reduce surgical morbidity and mortality for patients as well as to simplify procedure for surgeons, thereby saving time and health costs. Regarding these reasons, our research involves the development of a smart steerable guidewire using electroactive polymer (EAP) capable of bending when subjected to an input voltage. The actuation performance of the developed device is assessed through the curvature behavior (i.e., the displacement and the angle of the bending) of a cantilever beam structure, consisting of single- or multi-stack EAP printed on a substrate. Compared to the single-stack architecture, the multi-stack gives rise to a significant increase in curvature, even when subjected to a moderate control voltage. As suggested by the design framework, the intrinsic physical properties (dielectric, electrical, and mechanical) of the EAP layer, together with the nature and thickness of all materials (EAP and substrate), do have strong effect on the bending response of the device. The analyses propose a comprehensive guideline to optimize the actuator performance based on an adequate selection of the relevant materials and geometric parameters. An analytical model together with a finite element model (FEM) are investigated to validate the experimental tests. Finally, the design guideline leads to an innovative structure (composed of a 10-stack active layer screen-printed on a thin substrate) capable of generating a large range of bending angle (up to 190°) under an acceptable input level of 550 V, which perfectly matches the standard of medical tools used for cardiovascular surgery.

Adhesion failure and anti-adhesion bionic structure optimization of surgical electrodes in soft tissue cutting

Synergetic Effects of Nanoscale ALD-HfO 2 Coatings and Bionic Microstructures for Antiadhesive Surgical Electrodes: Improved Cutting Performance, Antibacterial Property, and Biocompatibility

Failure behavior and influence of surgical tool edges in soft tissue cutting

Biomimetic Anti-adhesive Surface Micro-structures of Electrosurgical Knife Fabricated by Fibre Laser

High quality anti-adhesion conductive electrotome

Laser Direct Writing of Setaria Virids-Inspired Hierarchical Surface with TiO2 Coating for Anti-Sticking of Soft Tissue

Nepenthes alata inspired anti-sticking surface via nanosecond laser fabrication

Effects of Different Tissue Loads on High Power Ultrasonic Surgery Scalpel.

Advanced Postoperative Tissue Antiadhesive Membranes Enabled with Electrospun Nanofibers

Design and simulation of a multi-functional radiofrequency tissue welding electrode

Catheter-integrated soft multilayer electronic arrays for multiplexed sensing and actuation during cardiac surgery

Design Optimization of Printed Multi-Layered Electroactive Actuators Used for Steerable Guidewire in Micro-Invasive Surgery

Anti-adhesion study of three-dimensional reconstructed carbon coatings

Optimizing Flexible Microelectrode Designs for Enhanced Efficacy in Electrical Stimulation Therapy

Anti-fatigue design of ultrasonic bone cutter based on finite element method

Bionic design of tools in cutting: Reducing adhesion, abrasion or friction

A Bioinspired Switchable Adhesive Patch with Adhesion and Suction Mechanisms for Laparoscopic Surgeries

Safety assessment of electrosurgical electrodes by using mini pig tissue

Electrical bioadhesive interface for bioelectronics

The Multi-Physics Analysis for a Novel Tool Structure to Improve the Accuracy in Electrochemical Micro-Machining

Exploring mechanical failure of porous electrode meso structure using the discrete element method