Abstract:Purpose: High-intensity focused ultrasound is a promising method for the noninvasive treatment of benign and malignant tumors. This study analyzes the effects of scanning path, applied power, and geometric characteristics of the transducer on ablation using fast scanning method, a new scanning method that uses high-intensity focused ultrasound at different blood perfusion levels. Methods: Two transducers, six scanning paths, and three focal patterns were used to examine the ablation results of the fast scanning method using power densities from 1.35 × 10(7) W∕m(3) to 4.5 × 10(7) W∕m(3) and blood perfusion rates from 2 × 10(-3) ml∕ml∕s to 16 × 10(-3) ml∕ml∕s. The Pennes equation was solved using the finite-difference time-domain method to simulate the heating procedure. Results: Based on the results of the fast-scanning method, the different scanning paths exhibited small effect on the total treatment time supported by both simulation and least-square fit. Similar-sized lesions can result from the five different repeated paths, whereas a random path may lead to relative large fluctuations in ablation volume because of asymmetry of the lesions. Higher power levels increase the lesion volume and decrease the treatment time required for ablating a target area using the fast scanning method, whereas increased blood perfusion has the opposite effect on ablation volume and treatment time. A symmetric lesion can be produced through fast scanning method using a 65-element and a 90-element transducer. However, lesion production using the same operation scheme differs between the two transducers. Conclusions: Unlike traditional scanning methods, fast scanning method produces a planned lesion regardless of scanning path, as long as the path consists of repeated subsequences. This attribute makes fast scanning method an easy-operation scheme that produces relatively large symmetric lesions in homogeneous tissues. Applied power is the most important factor; however, high blood perfusion levels can limit or even hinder the full ablation of the target area. Therefore, tissue perfusion and transducer type should be given special attention to ensure the success and safety of ablation treatment.

Effects of Different Tissue Loads on High Power Ultrasonic Surgery Scalpel.

Influence of Mechanical Factors on the Cutting Performance of an Ultrasonic Bone Scalpel

Design and Performance Study of an Ultrasonic Bone Scalpel with Composite Horn Structure

Identification of Key Performance Metrics for Different Ultrasonic Surgical Devices

Bone cutting processes and removal behaviors in orthopedic surgery with an ultrasonic orthopedic scalpel

Adhesion failure and anti-adhesion bionic structure optimization of surgical electrodes in soft tissue cutting

Acoustic black hole ultrasonic scalpel

Effects of different parameters in the fast scanning method for HIFU treatment

Comparison of Ablation Performance between Octopus Multipurpose Electrode and Conventional Octopus Electrode

The application and development of ultrasonic scalpel]

Experimental and clinical study of influence of high-frequency electric surgical knives on healing of abdominal incision

Parameter effects on arterial vessel sonicated by high-intensity focused ultrasound: an ex vivo vascular phantom study

High-performance planar ultrasonic tool based on d₃₁-mode piezocrystal

Comparison of the Thermal Damage of Energy-Based Surgical Devices During Thyroid Surgery

Development and evaluation of a titanium-based planar ultrasonic scalpel for precision surgery

Piezoelectric transducer design for an ultrasonic scalpel with enhanced dexterity for minimally invasive surgical robots

Effect of Process Parameters on the Performance of Laser Repair of Esophageal Tissue Incisions

High-power characterization of a microcutter actuated by PMN-PT piezocrystals

Experimental and Finite Element Analysis of Force and Temperature in Ultrasonic Vibration Assisted Bone Cutting

Characterization of Normal and Freeze-Thawed Tissues in vitro Through The Ultrasonic Integrated Backscatter.

The investigation of safety and reliability of ultrasonic scalpel on the application of cervical French-door laminoplasty