Abstract:<p>Owing to reliability and high strength-to-weight ratio, large thin-walled components are widely used in the aviation and aerospace industry. Due to the complex features and sequence involved in the machining process of large thin-walled components, machining deformation of component is easy to exceed the specification. In order to address the problem, it is important to retain the appropriate finishing allowance. To find the overall machining deformation, finishing allowance - induced deformation (web finishing allowance, sidewall finishing allowance) and initial residual stress - induced deformation were considered as major factors. Meanwhile, machined surface residual stress - induced deformation, clamping stress -induced deformation, thermal deformation, gravity-induced deformation and inertial force-induced deformation were neglected in the optimization model. Six-peak Gaussian function was introduced to fit the initial residual stress. Based upon the obtained function of initial residual stress, a deformation prediction model between initial residual stress and finishing allowance was established to attain the finishing allowance-induced deformation. In addition, linear programming optimization model based on the simplex algorithm was developed to optimize the overall machining deformation. Results have concluded that the overall machining deformation reached the minimum value when sidewall finishing allowance and web finishing allowance varied between 1-2 mm. Additionally, web finishing allowance - induced deformation and sidewall finishing allowance - induced deformation were 1.05 mm and 0.7 mm. Furthermore, the machining deformation decreased to 0.3-0.38 mm with the application of optimized finishing allowance allocation strategy, which made 39 %-56 % reduction of the overall machining deformation compared to that in conventional method.</p>

Variance-based sensitivity analysis for the influence of residual stress on machining deformation

Finite Element Simulation and Analysis of Deformation in Machining of Aeronautical Aluminum Alloy Thin-Walled Workpiece

Analysis and Simulation of Machining Deformation Resulting from Residual Stress

Uncertainty quantification in machining deformation based on Bayesian network

Sensitivity Analysis Using a Variance-Based Method for a Three-Axis Diamond Turning Machine

A semi-analytical model for predicting the machining deformation of thin-walled parts considering machining-induced and blank initial residual stress

Analytical modeling of milling residual stress under different tool wear conditions

Residual stress prediction in ultrasonic vibration–assisted milling

Investigation on influences of initial residual stress on thin-walled part machining deformation based on a semi-analytical model

Effects of Processing Parameters and Tool Geometric Parameters on Residual Stress of Machined 304 Stainless Steel

An Initial Residual Stress Inference Method by Incorporating Monitoring Data and Mechanism Model

Numerical and experimental investigation of tool geometry effect on residual stresses in orthogonal machining of Inconel 718

Simulating Assembly Geometric And Stress Variation Considering Machining-Induced Residual Stress

Simulation Study of Cutting-Induced Residual Stress

Study on Residual Stresses in Ultrasonic Torsional Vibration Assisted Micro-Milling

Machining deformation of single-sided component based on finishing allowance optimization

Study on the Evolution of Residual Stress in Successive Machining Process

Effects of TVSR process on the dimensional stability and residual stress of 7075 aluminum alloy parts

Calculation of residual stress in ultrasonic vibration assisted grinding considering thermal-mechanical coupling: a numerical-analytical hybrid prediction approach

Prediction Model for the Evolution of Residual Stresses and Machining Deformation of Uneven Milling Plate Blanks

Quantitative Modeling and Decoupling Method for Assembly Deformation Analysis Considering Residual Stress from Manufacturing Process