Abstract:Self-compacted concrete (SCC) is a special type of concrete; it is a liquid mixture appropriate for structural elements with excessive reinforcement without vibration. SCC is commonly produced by increasing the paste volume and cement content. As cement production is one of the huge factors in releasing CO2 gas into the atmosphere, by-product materials such as fly ash are utilized as a cement replacement in concrete. In addition to the positive environmental impact, fly ash can maintain an excellent fresh and mechanical property. Incorporating fly ash into self-compacted concrete is widely applied in practice. However, its application is frequently limited by a lack of knowledge about the mixed material gained from laboratory tests. The most significant mechanical property for all concrete types is compressive strength (CS); also, the slump flow diameter (SL) in the fresh state is a crucial property for SCC. Hence, developing an accurate and reliable model for predicting the CS and SL is very important for saving time and energy, as well as lowering the cost. This research study proposed a projection of both the CS and SL of SCC modified with fly ash by three different model approaches: Nonlinear regression (NLR), Multi-Linear regression (MLR), and Artificial Neural Networks (ANN). In this regard, two different datasets were collected and analyzed for developing models: 308 data samples were used for predicting the CS, and 86 data samples for the SL. Each database included the same five independent parameters. The ranges for CS prediction were: cement (134.7–583 kg/m3), water-to-binder ratio (0.27–0.9), fly ash (0–525 kg/m3), sand (478–1180 kg/m3), coarse aggregate (578–1125 kg/m3), and superplasticizer (0–1.4%). The dependent parameter (CS) ranged from 9.7 to 81.3 MPa. On the other hand, the data ranges for the SL prediction included independent parameters such as cement (83–733 kg/m3), water-to-binder ratio (0.26–0.58), fly ash (0–468 kg/m3), sand (624–1038 kg/m3), coarse aggregate (590–966 kg/m3), and superplasticizer (0.087–21.84%). Also, the dependent parameter (SL) ranged from 615 to 800 m. Various statistical assessment tools, such as the coefficient of determination (R2), Root Mean Squared Error (RMSE), Mean Absolute Error (MAE), Objective value (OBJ), and Scatter Index (SI), were used to evaluate the performance of the developed models. The results showed that the ANN model best predicted the CS and SL of SCC mixtures modified with fly ash. Furthermore, the sensitivity analysis demonstrated that the cement content is the most effective factor in predicting the CS and SL of SCC mixtures.

Shrinkage Behavior and Prediction Model of Self-Compacting Concrete

Shrinkage and Creep of Sustainable Self-Compacting Concrete with Recycled Concrete Aggregates, Fly Ash, Slag, and Silica Fume

Development of Sustainable Self-Compacting Concrete Using Recycled Concrete Aggregate and Fly Ash, Slag, Silica Fume

Unveil the Role of Nano-Caco3 in Early Shrinkage and Tensile Properties of Cement Paste: from Experimental Work to Modeling

Identification of Indexes That Could Reflect Early Drying Shrinkage of High Strength Concrete with Minerals

Interpretable machine learning model for autogenous shrinkage prediction of low-carbon cementitious materials

Shrinkage of high-performance fiber-reinforced concrete with adapted rheology

A Reaction-Diffusion Modeling of Carbonation Process in Self-Compacting Concrete

Numerical study of the autogenous shrinkage of cement pastes with supplementary cementitious materials based on solidification theory

Unified shrinkage model for concrete from autogenous shrinkage test on paste with and without ground-granulated blast-furnace slag

Autogenous shrinkage prediction models and microstructure of UHPC with single or binary addition of an expansive agent and steel fibers

Micromechanical Modeling on Autogenous and Drying Shrinkages of Concrete

Shrinkage design model of concrete incorporating wet packing density

The Influence and Application of Slag, Fly Ash, and Limestone Flour on Compressive Strength of Concrete Based on the Concrete Compressive Strength Development over Time (CCSDOT) Model

Soft Computing and Machine Learning-Based Models to Predict the Slump and Compressive Strength of Self-Compacted Concrete Modified with Fly Ash

Extension of the fib MC 2010 for basic and drying shrinkage of alkali‐activated slag concretes

Numerical Analysis of Drying Shrinkage in Long Reinforced Concrete Structure

Prediction Model of Compressive Strength Development in Concrete Containing Four Kinds of Gelled Materials with the Artificial Intelligence Method

Design and Control Shrinkage Behavior of High-Strength Self-Consolidating Concrete Using Shrinkage-Reducing Admixture and Super-Absorbent Polymer

Properties prediction for self-compacting concrete incorporating activated fiber and stone chips

Autogenous Shrinkage Measuring of Concrete and Model Analysis