Abstract:Polarization and mode division multiplexing are powerful tools for large-capacity parallel optical communications. Dual-polarization and mode-division multiplexed silicon photonic integrated circuit with ultra-small footprint is proposed and experimentally demonstrated. The circuits consist of a mode multiplexer, 3-dB power splitter and two demultiplexers which can simultaneously handle TE0, TE1, TM0 and TM1 mode. Compared with conventional device structure, the device footprint is scaled down via pixelated waveguide meta-structure. The mode multiplexer and the splitter have a footprint of only 6.8 mu m x 6 mu m and 6 mu m x 5.25 mu m, respectively. The fabrication tolerance on the nanohole size variations are studied, and the fabricated devices are systematically characterized. The measured insertion losses of the multiplexer and 3-dB power splitter are below 1.4 dB and 4.5 dB for all four modes within the wavelength range from 1530 nm-1570 nm. In the meantime, the measured maximum inter-mode cross talk is below -15 dB over a 30 nm bandwidth. The experimental results also indicate the power imbalance of the splitter is within 0.4 dB from 1530 nm-1570 nm. Since the demonstrated polarization and mode handling devices via pixelated meta-structures occupy significantly smaller chip area than conventional wisdoms, this work shows the potential for large scale and dense integration of polarization and mode division multiplexing system on photonic chip.

Broadband tunable electro-optic switch/power divider as potential building blocks in integrated lithium niobate photonics

Broadband polarization splitter-rotator on a thin-film lithium niobate with conversion-enhanced adiabatic tapers.

Lithium Niobate Thin Film Polarization Beam Splitter Based on Asymmetric Directional Coupling

TE/TM mode electro-optic conversion based on titanium diffusion lithium niobate waveguide with polarization-maintained fiber structure

An Ultra-Broadband Polarizing Beam Splitter/coupler Using Asymmetric-Waveguides

Electro-optically programmable photonic circuits enabled by wafer-scale integration on thin-film lithium niobate

Tunable Linear Polarization-State Generator of Single Photons on a Lithium Niobate Chip

Polarization Coupling of Light and Optoelectronics Devices Based on Periodically Poled Lithium Niobate

Compact and Broadband Polarization Beam Splitter on Lithium-Niobate-on-insulator Using a Hybrid Plasmonic Waveguide

Compact Adiabatic Polarization Splitter-Rotator on Thin-Film Lithium Niobate

Miniaturized Low-power Electro-optic Modulator Based on Silicon Integrated Nanophotonics and Organic Polymers

Design of a switchable triple-waveguide-based TE-converted polarization beam splitter based on lithium niobate

On-chip Integrated Optical Switch Based on Polymer Waveguides

Polarization-insensitive Silicon Optic Switch Based on Mode Manipulated Power Splitters and Phase Shifters

Compact and broadband polarization beam splitter based on a bridged hybrid plasmonic waveguide coupler on a thin-film lithium niobate

Ultra-Compact Mode-Division Multiplexed Photonic Integrated Circuit for Dual Polarizations

Integrated Ultracompact and Broadband Wavelength Demultiplexer Based on Multi-Component Nano-Cavities

A Hybrid Lithium Tantalite-Silicon Photonics Platform for Electro-Optic Tuning

Polarization Insensitive Quasi-Phase-matched Frequency Conversion in a Periodically Poled Lithium Niobate

Electro-Optic Tunable Optical Isolator In Periodically Poled Linbo3