Abstract:Solid-state lithium batteries using solid polymer electrolytes can improve the safety and energy density of batteries. Smoother lithium-ion channels are necessary for solid polymer electrolytes with high ionic conductivity. The porosity and channel structure of the polymer film affect the transfer of lithium ions. However, their controllable synthesis remains a big challenge. Here, we developed a simple synthesis approach toward wrinkled microporous polymer electrolytes by combining the amphoteric (water solubility and organic solubility) polymer in three polymer blends. The homogeneous blend solution spontaneously wrinkled to vertical fold channels as the solvent evaporated. Two minor polymers, poly(vinyl pyrrolidone) (PVP) and polyetherimide (PEI), formed close stacks, and Janus PVP was dispersed in the poly(vinylidene fluoride) (PVDF) matrix. The interfacial tensions between the three polymers were different, so stress was produced when they solidified. The solvent was evaporated to the top layer of the polymers when the temperature increased. The bottom layer wrinkled owing to the stress during solidification. The evaporation of the solvent generated micropores to form the lithium-ion channel. They helped Li+ transference and created a wrinkled microporous PVDF-based polymer electrolyte, which achieved an ionic conductivity of 5.1 × 10–4 S cm–1 and a lithium-ion transference number of 0.51 at room temperature. Meanwhile, the good flame retardancy and tensile strength of the polymer electrolyte film can improve the safety of the battery. At 0.5C and room temperature, the batteries with a LiFePO4 cathode and the wrinkled microporous LiTFSI/PEI/PVP/PVDF electrolyte reached a high discharge specific capacity of 122.1 mAh g–1 at the 100th cycle with a Coulombic efficiency of above 99%. The results of tensile and self-extinguishing tests show that the polymer electrolyte film has good safety application prospects.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c11489.Experimental section and characterization. Figure S1: forcite dynamics temperature. Figure S2: forcite dynamics energies. Figure S3: gyration radius of the simulation. Figure S4: number of lithium ions transferred in the LiTFSI/PVP/PVDF polymer electrolyte. Figure S5: electrochemical stability window of the LiTFSI/PVP/PVDF polymer electrolyte. Figure S6: voltage–specific capacity curve of the first cycle of the Li∥LiTFSI/PEI/PVP/PVDF∥LiFePO4 battery. Figure S7: potential–specific capacity curve of the Li∥LiTFSI/PEI/PVP/PVDF∥Li2TiO3 battery at 0.5C. Figure S8: discharge capacity and efficiency cycle number curve of the Li∥LiTFSI/PEI/PVP/PVDF∥Li2TiO3 battery at 0.5C. Figure S9: TG curve of polymer electrolyte. Figure S10: DTG curve of polymer electrolyte. Table S1: comparison of the discharge specific capacity of the Lia∥LiTFSI/PEI/PVP/PVDFa∥LiFePO4 battery with the previously reported solid-state polymer electrolyte lithium metal batteries at different temperatures and rate capabilities (PDF)This article has not yet been cited by other publications.

Electrochemical properties of lithium iron phosphate cathode material using polymer electrolyte

High electrochemical stability of a 3D cross-linked network PEO@nano-SiO2 composite polymer electrolyte for lithium metal batterie

Synthesis, characterization and properties of LiFePO4/C cathode material

Excellent Performances of Composite Polymer Electrolytes with Porous Vinyl-Functionalized SiO2 Nanoparticles for Lithium Metal Batteries

High‐rate Lithium Iron(II) Phosphate as Cathode Material for Rechargeable Lithium Batteries

PVDF-HFP composite polymer electrolyte with excellent electrochemical properties for Li-ion batteries

Composite polymer electrolyte facilitated by enhanced amorphousity and Li+ conduction using LaFeO3-embedded PVDF-HFP for solid-state lithium metal battery

Synthesis of lithium iron phosphate/carbon microspheres by using polyacrylic acid coated iron phosphate nanoparticles derived from iron(III) acrylate.

Composite Solid Electrolyte for Solid-State Lithium Batteries Workable at Room Temperature

Organic Cationic-Coordinated Perfluoropolymer Electrolytes with Strong Li+-Solvent Interaction for Solid State Li-Metal Batteries

Localized High Concentration Polymer Electrolyte Enabling Room Temperature Solid-State Lithium Metal Batteries with Stable LiF-rich Interphases

Effect of carbon coating on the electrochemical performance of LiFePO4/C as cathode materials for aqueous electrolyte lithium-ion battery

Single‐Ion Conductive Polymer‐Based Composite Electrolytes for High‐Performance Solid‐State Lithium Metal Batteries

Composite Polymer Electrolytes with Ionic Liquid Grafted-Laponite for Dendrite-Free All-Solid-state Lithium Metal Batteries

Synthesis and Characterization of a LiFe 0.6 Mn 0.4 PO 4 Olivine Cathode for Application in a New Lithium Polymer Battery

Block Copoly (Ester-Carbonate) Electrolytes for LiFePO4|Li Batteries with Stable Cycling Performance

Enhanced Electrochemical Performance of Poly(ethylene oxide) Composite Polymer Electrolyte via Incorporating Lithiated Covalent Organic Framework

Three-Dimensional Carbon-Coated LiFePO4 Cathode with Improved Li-Ion Battery Performance

A Ternary Polyaniline/Active Carbon/Lithium Iron Phosphate Composite as Cathode Material for Lithium Ion Battery.

Nano-scale hollow structure carbon-coated LiFePO4 as cathode material for lithium ion battery

Improving Fast and Safe Transfer of Lithium Ions in Solid-State Lithium Batteries by Porosity and Channel Structure of Polymer Electrolyte