Abstract:LTUV (longitudinal-torsional ultrasonic vibration) makes cutting speed change rapidly; it is obvious that the rapid change makes the cutting edge become sharp and drilling force macroscopically reduce. Most experiment study has indicated that comparing with conventional drilling CFRP/Ti-alloy stacks, the hole quality of LTUV drilling is superior. For in-depth theoretical study of drilling forces of LTUV drilling, the drill bit is regarded as a continuous elastic body under the action of foundation vibration in this paper, its dynamic model is established, and the dynamic component prediction models of both thrust force and torque are derived. The reliability of the prediction model is verified by drilling experiment. This research shows that the ultrasonic vibration of the drill bit is the main factor to improve the cutting condition. The magnitude of both dynamic component of thrust force produced by longitudinal ultrasonic vibration and the torque dynamic component generated by the torsional vibration mainly depends on the vibration parameters (amplitude and frequency) and the drill bit geometric parameters. The drilling parameters (including spindle rotation speed and feed rate) nearly have no effect. When the drilling parameters are certain, the equivalent viscous damping coefficient is related to the geometric parameters of the drill bit, vibration parameters, tool materials, and processed materials. For different materials, the equivalent viscous damping coefficient is different. To conduct a small number of experiments, the damping coefficient of one drilling system can be calculated by measuring the difference of thrust force or torque between the LTUV drilling and the conventional drilling under the same drilling parameters. This work provides a reference for predicting the thrust force and torque of the LTUV drilling, rationally choosing the tool and determining the drilling parameters.

Research on Variable Parameter Drilling Method of Ti-CFRP-Ti Laminated Stacks Based on Real-Time Sensing of Drilling Axial Force

A Force Sensorless Method for CFRP/Ti Stack Interface Detection During Robotic Orbital Drilling Operations

Clamping force prediction for automatic drilling of stacked thin-walled workpieces based on finite element method

Hole Diameter Variation and Roundness in Dry Orbital Drilling of Cfrp/Ti Stacks

Development of a Real-Time Monitoring and Calculation Method for TBM Disc-Cutter's Cutting Force in Complex Ground

Processing research on orbital drilling of CFRP/Ti-6Al-4V stacks

Tool Wear Processes in Low Frequency Vibration Assisted Drilling of CFRP/Ti6Al4V Stacks with Forced Air-Cooling

Study on the mechanism and performance of longitudinal-torsional ultrasonic vibration assisted drilling CFRP/Ti stack

Experimental Study on Longitudinal-Torsional Ultrasonic Vibration Drilling of Carbon Fiber–reinforced Plastics/titanium Alloy Stacks

Experimental Study on Drilling Mechanisms and Strategies of Hybrid CFRP/Ti Stacks

Experimental study on step drill geometry and pecking drilling with variable parameters processing method as drilling of CFRP and Ti stacks

Investigation on the cutting responses of CFRP/Ti stacks: With special emphasis on the effects of drilling sequences

On the Analysis of Temperatures, Surface Morphologies and Tool Wear in Drilling CFRP/Ti6Al4V Stacks under Different Cutting Sequence Strategies

Study on Tool Deflection Compensation Method Based on Cutting Force Observer for Orbital Drilling of CFRP/Ti Stacks

Experimental Study on Mechanical Drilling of Carbon/epoxy Composite-Ti6al4v Stacks

Study on dynamic drilling forces of CFRP/Ti stacks during longitudinal-torsional ultrasonic vibration drilling

Investigation of CFRP damages induced by the interface high temperature and mixed tool wear mechanism in drilling of thin-walled CFRP /Ti stacks

Influence of Metal Chips on Drilling Quality of Carbon Fiber Reinforced Plastic and Titanium Stacks

Investigation of Drilling CFRP-TC4 Stacks

On the Interpretation of Drilling CFRP/Ti6Al4V Stacks Using the Orthogonal Cutting Method: Chip Removal Mode and Subsurface Damage Formation

A Study on Drilling of CFRP/Ti Stacks: Temperature Field and Thermal Damage of the Interface Region