Abstract:Ultra-high-temperature ceramics (UHTCs) are optimal structural materials for applications that require extreme high temperature resilience (M p > 3000 °C), resistance to chemically aggressive environments, wear, and mechanical stress. Processing UHTCs with laser-based additive manufacturing (AM) has not been fully realized due to a variety of obstacles. In this work, selective laser reaction sintering techniques (SLRS) were investigated for the production near net-shape UHTC ceramics such as HfC, ZrC, TiC, HfN, ZrN, and TiN. Specifically, group IV transition metal and metal oxide precursor materials (<44 μm) were chemically converted and reaction-bonded into layers of UHTCs using single-step selective laser processing in 100 vol% CH 4 or NH 3 gas that might be compatible with prevailing powder bed fusion techniques. Conversion of either metals (Hf, Zr and Ti) or metal oxides (HfO 2 , ZrO 2 , and TiO 2 ) particles was first investigated to examine reaction mechanisms and volume changes associated with SLRS of single-component precursor systems. SLRS processing of metal or metal oxide alone produced near stoichiometric UHTC phases and yields up to >99.9 wt% total for carbides and nitrides and during the rapid reactive in-situ processing scheme. However, for single-phase feedstocks, gas-solid reactivity induced volumetric changes (correlated with the stochiometry of the rocksalt-type UHTC carbide and nitride products) resulted in residual stresses and cracking in the model-AM product layer. To mitigate conversion-induced stresses of single-phase precursors, composite metal/metal oxide precursors were employed to compensate for the volume changes of either the metal (which expands during conversion) or the metal oxide precursor (which contracts). While conversion of the optimized composite materials produced HfC layers with as little as +0.9% volume change, results indicated interparticle adhesion must be optimized to obtain robust UHTC-AM layers. Computational models of carbon and nitrogen diffusion in host transition metal lattices corroborated experimental results where a progressive particle conversion might inhibit interparticle diffusion unless laser processing parameters are carefully optimized to favor reaction bonding over discrete particle conversion. While this method presents a host of processing considerations, we demonstrate how this reactive approach may be viable for the AM of numerous UHTC materials that are not readily produced using current methods.

Direct Laser 3D Printing of Refractory Materials

Direct selective laser sintering of high-entropy carbide ceramics

The study of near-net shape lithium aluminosilicate glass-ceramics by direct ink writing

Microstructures, Mechanical Properties and Electromagnetic Wave Absorption Performance of Porous SiC Ceramics by Direct Foaming Combined with Direct-Ink-Writing-Based 3D Printing

Reactive laser synthesis of ultra-high-temperature ceramics HfC, ZrC, TiC, HfN, ZrN, and TiN for additive manufacturing

Additive manufacturing of SiC-Sialon refractory with excellent properties by direct ink writing

Fabrication and characterization of carbon fiber reinforced SiC ceramic matrix composites based on 3D printing technology

Fabrication and properties of TiC-high manganese steel cermet processed by 3D gel printing

Research on laser-assisted selective metallization of a 3D printed ceramic surface

Carbon Nanotubes Enabled Laser 3D Printing of High-Performance Titanium with Highly Concentrated Reinforcement

Three-dimensional porous tungsten via DLP 3D printing from transparent ink

Printing Three‐Dimensional Refractory Metal Patterns in Ambient Air: Toward High Temperature Sensors (Adv. Sci. 31/2023)

High‐Precision Printing of Cermets by Collapsable Matrix Assisted Digital Light Processing

3D printing Si3N4-bonded SiC refractories fabricated using colloidal films-containing slurries based on non-spherical SiC and Si powders

Crucible-free Fabrication of ZrB2–SiC Composite Ceramics with Ultra-Fine Eutectic Microstructure by Laser Surface Zone-Melting: the Selection of Lasers

Selective laser reaction synthesis of SiC, Si3N4 and HfC/SiC composites for additive manufacturing

Freeform Fabrication of Ti3SiC2 Powder-Based Structures

Impact of Sintering Aid Type and Content on the Mechanical Properties of Digital Light Processing 3D-Printed Si3N4 Ceramics

Selective Laser Melting of High-Performance Pure Tungsten: Parameter Design, Densification Behavior and Mechanical Properties

Printing Three‐Dimensional Refractory Metal Patterns in Ambient Air: Toward High Temperature Sensors

Laser metal deposition of Ta-10W alloy based on annular laser cladding with internal wire feeding