Abstract:Due to the rich reserves of the raw materials, along with their low cost and nontoxic nature, Mg2Si1−xSnx-based compounds have generated intense attention from the international thermoelectric community for their application in thermoelectric power generation within the intermediate temperature range. In this work, we have adopted a two-step solid state reaction followed by a spark plasma sintering process to prepare a series of Sb-doped Mg2.16(Si0.4Sn0.6)1−ySby (0 ≤ y ≤ 0.055) solid solutions. We discuss the influence of Sb doping and the microstructure on the thermoelectric properties. Our results confirm that Sb acts as an effective n-type dopant and we estimate the maximum amount of Sb the Mg2Si0.4Sn0.6 structure can accommodate to be ∼2.3% by XRD, DSC and EPMA analyses. The electron transport properties and low-temperature electronic heat capacity measurements reveal that both the light conduction band and the heavy conduction band contribute to the transport in n-type Mg2Si0.4Sn0.6 solid solutions. The highest density-of-states effective mass and power factor were observed for Mg2.16(Si0.4Sn0.6)0.985Sb0.015 with an electron concentration of n ≈ 1.67 × 1020 cm−3, which is likely to be due to the Fermi level positioned within ∼2kBT of both the heavy and light conduction bands providing contributions from both bands. In addition, doping with Sb does not seem to affect the lattice thermal conductivity above room temperature. TEM analysis indicates the presence of Sn-rich precipitates with the size of several tens of nanometers dispersed in the Mg2Si0.4Sn0.6 matrix. Such a nanophase may enhance the boundary scattering of phonons and contribute to a low lattice thermal conductivity. Owing to the above characteristics of the band structure and the microstructure, the Mg2.16(Si0.4Sn0.6)0.985Sb0.015 solid solution with n = 1.67 × 1020 cm−3 possessed excellent thermoelectric properties and achieved a high ZT value of 1.3 at 740 K. Further reductions in the lattice thermal conductivity could be achieved via optimization of the nanophase inclusions, leading to a further enhancement of the figure of merit for Mg2Si0.4Sn0.6-based solid solutions.

Enhanced thermoelectric properties of Mg2Si0.3Sn0.7 via Bi-doping under high pressure

Enhanced thermoelectric properties of Mg2Si 0.58Sn0.42 compounds by Bi doping

Enhanced thermoelectric performance of Sb-doped Mg2Si0.4Sn0.6 via doping, alloying and nanoprecipitation

High figure of merit and thermoelectric properties of Bi-doped Mg 2Si0.4Sn0.6 solid solutions

Enhanced Thermoelectric Properties of N-Type Mg2.16(Si0.4Sn0.6)1−ySby Due to Nano-Sized Sn-rich Precipitates and an Optimized Electron Concentration

Effect of Sb Doping on the Thermoelectric Properties of Mg 2 Si 0.7 Sn 0.3 Solid Solutions

Effect of Sb Doping on the Thermoelectric Properties of Mg<sub>2</sub>Si<sub>0.7</sub>Sn<sub>0.3</sub> Solid Solutions

Improving Thermoelectric Performance of P-Type Ag-doped Mg2Si0.4Sn0.6 Prepared by Unique Melt Spinning Method

Thermoelectric properties of Sb-doped Mg2Si0.59Sn0.41solid solutions

Reduced Lattice Thermal Conductivity In Bi-Doped Mg2si0.4sn0.6

Thermoelectric Properties of Sb-doped Mg2 Si0.59 Sn0.41 Solid Solutions

Na/Bi-co-doping and Heterogeneous Interfaces Leading to Enhanced Thermoelectric Performance of P-Type Mg3Sb2-based Zintls

Significant Role of Mg Stoichiometry in Designing High Thermoelectric Performance for Mg3(Sb,Bi)2-Based N-Type Zintls.

Optimized Thermoelectric Properties of Sb-Doped Mg2(1+z)Si0.5–ySn0.5Sby Through Adjustment of the Mg Content

Significantly enhanced thermoelectric figure of merit of n-type Mg3Sb2-based Zintl phase compounds via co-doped of Mg and Sb site

Multiscale microstructures and improved thermoelectric performance of Mg 2 ( Si 0.4 Sn 0.6 ) Sb x solid solutions

Extraordinary thermoelectric performance, thermal stability and mechanical properties of n-type Mg3Sb1.5Bi0.5 through multi-dopants at interstitial site

Effect of Sb-Doping on the Thermoelectric Properties of Mg2Si Based Compounds

Effects of Bi and Sb Doping on the Thermoelectric Performance of N-Type Quaternary Mg2.18Ge0.1Si0.3Sn0.6 Materials

Enhanced Thermoelectric Performance in P-Type Mg 3 Sb 2 Via Lithium Doping

Roles of Interstitial Mg in Improving Thermoelectric Properties of Sb-doped Mg2Si0.4Sn0.6 Solid Solutions