Abstract:Tungsten is considered as the preferred material for plasma-oriented materials in fusion reactors, and its ultra-precision machining is a concern at present. However, the critical cutting depth for chip generation is an important parameter affecting the surface formation and removal behavior of materials in ultra-precision machining. Herein, the simulation analysis of nano-cutting tungsten using molecular dynamics (MD) was performed, and a new method to determine the minimum uncut chip thickness h min by identifying the atomic trajectory and calculating the relative coordinate value was proposed. Then, the effects rarely reported of the chip formation on the removal mechanism of tungsten were studied. The research showed that when the cutting depth h was 0.253 times of the cutting edge radius r, the critical cutting depth without chip was reached, namely h min. The increasing cutting temperature and stress led to the decrease of machined surface quality and the increase of subsurface damage with the rising in h/r. Meanwhile, the dislocation slip dominated by the direction of 1/2<111> was the main plastic deformation mechanism during cutting without chip, but the dislocation slip dominated by direction of <100> was main plastic deformation mechanism during processing with chip. The plastic deformation dominated by dislocation slip was also accompanied by the amorphization. The dislocation reaction from 1/2<111> dislocation to <100> dislocation occurred under both energy and geometry conditions. Moreover, the dislocations had more energy to expand and evolve as a result of thermal-activated effect induced by elevated cutting force and temperature, which increased the dislocation density, depth of subsurface damage layer, and the stress variation degree of the machined area with the enhancement of h min during cutting. This research provides a reference method for determining the minimum uncut chip thickness during material removal and is of significance for mastering the microscopic removal mechanism of tungsten.

Experimental Study on the Minimum Undeformed Chip Thickness Based on Effective Rake Angle in Micro Milling

Determination of the Minimum Chip Thickness and the Effect of the Plowing Depth on the Residual Stress Field in Micro-Cutting of 18 Ni Maraging Steel

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Research on the minimum cutting thickness of variable density micro-texture ball-end milling cutter

Prediction of Nonlinear Micro-Milling Force with a Novel Minimum Uncut Chip Thickness Model

Experimental Study on Chip Shape and Tool Wear of High-Speed and Micro-Feed Cutting

Determination of minimum uncut chip thickness and size effects in micro-milling of P-20 die steel using surface quality and process signal parameters

Investigation on chip formation mechanism of high-aspect-ratio micro-milled structures

Effects of minimum uncut chip thickness on tungsten nano-cutting mechanism

Finite Element Simulation of Minimum Cutting Thickness in Micro-Cutting

Modeling and investigation of minimum chip thickness for silicon carbide during quasi-intermittent vibration–assisted swing cutting

The micro-drilling process fine modeling with the strain characteristics of undeformed chip considered

Investigation on dynamic tool deflection and runout-dependent analysis of the micro-milling process

Experimental study of a new micromilling process for vortex curved thin walls

A Processing Technical Analysis for the Characteristics of Forces and Surface Roughness in Micro-Scale Milling

Influence of tool flank wear considering tool edge radius on instantaneous uncut chip thickness and cutting force in micro-end milling

Influence of the Relative Displacements and the Minimum Chip Thickness on the Surface Texture in Shoulder Milling

Prediction of micro milling force and surface roughness considering size-dependent vibration of micro-end mill

Investigation of the tool flank wear influence on cutter-workpiece engagement and cutting force in micro milling processes

Suppressing the burr of high aspect ratio structure by optimizing the cutting parameters in the micro-milling process

Studying the Effects of Cutting Parameters on Burr Formation and Deformation of Hierarchical Micro-Structures in Ultra-Precision Raster Milling