Abstract:Tungsten is considered as the preferred material for plasma-oriented materials in fusion reactors, and its ultra-precision machining is a concern at present. However, the critical cutting depth for chip generation is an important parameter affecting the surface formation and removal behavior of materials in ultra-precision machining. Herein, the simulation analysis of nano-cutting tungsten using molecular dynamics (MD) was performed, and a new method to determine the minimum uncut chip thickness h min by identifying the atomic trajectory and calculating the relative coordinate value was proposed. Then, the effects rarely reported of the chip formation on the removal mechanism of tungsten were studied. The research showed that when the cutting depth h was 0.253 times of the cutting edge radius r, the critical cutting depth without chip was reached, namely h min. The increasing cutting temperature and stress led to the decrease of machined surface quality and the increase of subsurface damage with the rising in h/r. Meanwhile, the dislocation slip dominated by the direction of 1/2<111> was the main plastic deformation mechanism during cutting without chip, but the dislocation slip dominated by direction of <100> was main plastic deformation mechanism during processing with chip. The plastic deformation dominated by dislocation slip was also accompanied by the amorphization. The dislocation reaction from 1/2<111> dislocation to <100> dislocation occurred under both energy and geometry conditions. Moreover, the dislocations had more energy to expand and evolve as a result of thermal-activated effect induced by elevated cutting force and temperature, which increased the dislocation density, depth of subsurface damage layer, and the stress variation degree of the machined area with the enhancement of h min during cutting. This research provides a reference method for determining the minimum uncut chip thickness during material removal and is of significance for mastering the microscopic removal mechanism of tungsten.

Finite Element Simulation of Minimum Cutting Thickness in Micro-Cutting

The Minimum Cutting Thickness in Milling Process Simulation Analysis

Determination of the Minimum Chip Thickness and the Effect of the Plowing Depth on the Residual Stress Field in Micro-Cutting of 18 Ni Maraging Steel

Finite Element Simulation of High-Speed Cutting

Research on the minimum cutting thickness of variable density micro-texture ball-end milling cutter

Modelling and Analysis of Micro Scale Milling Considering Size Effect, Micro Cutter Edge Radius and Minimum Chip Thickness

Finite Element Simulation and Analysis of Size Effect in Micro-Milling Process

Molecular Dynamics Simulation of Subnanometric Tool-Workpiece Contact on a Force Sensor-Integrated Fast Tool Servo for Ultra-Precision Microcutting

Finite Element Analysis of Adiabatic Shear Band Formation in Titanium Alloy Cutting Process

Effects of minimum uncut chip thickness on tungsten nano-cutting mechanism

Numerical Cutting Simulation and Experimental Investigations on Determining the Minimum Uncut Chip Thickness of PTFE

Prediction of Nonlinear Micro-Milling Force with a Novel Minimum Uncut Chip Thickness Model

Modeling and Experimental Analysis the Effect of Minimum Chip Thickness on Cutting Temperature in Micro-End-Milling Process

Experimental Study on the Minimum Undeformed Chip Thickness Based on Effective Rake Angle in Micro Milling

A Finite Element Model for Micro Machining Considering Size Effect of Material Behaviour and Tool Geometry

Finite Element Analysis of Three-Dimensional Precision Cutting

Determination of the Minimum Uncut Chip Thickness of Ti-6Al-4V Titanium Alloy Based on Dead Metal Zone

Modeling of Three-Dimensional Cutting Forces in Micro-End-Milling

Finite element simulation and experimental research on microcutting mechanism of single crystal silicon

Finite Element Analysis of Revolving Tip-Based Cutting Process

Finite Element Simulation of Influence of Tool Edge Radius in Micro-milling