Abstract:In this article, the design process of a novel vibrating tool is presented to improve some key aspects of Single Point Incremental Sheet Forming (SPISF). The overall effect of a vibration assistance is an improvement of the process by decreasing certain constraints occurring during manufacturing (e.g., high forming forces, poor roughness and elastic springback). For developing such assistance, the objective of this study is to present the design methodology and characterization of an innovative tool. The horn-shape design of the tool is optimized to resonate at its natural frequencies in the 4–16 kHz frequency bandwidth. A frequency decoupling of the tool modes is obtained by a successful desymmetrization of the tool design to precisely control the vibration direction, focusing on axial, radial or coupled vibrating motion of the tool tip. Then, the unidirectional vibrating force generated by a piezoelectric actuator is transformed into a controlled multidirectional vibrating motion of the tool tip depending on the frequency and the amplitude of the actuator input signal. The core contribution of the paper is the design methodology itself of the forming tool, which encompasses a novel approach focused on the tool/sheet contact coupling analysis and its effect on the vibrating behavior of the tool during SPIF process conditions. All steps of the design methodology are described: from the design specifications to the prototype validation, including a finite element analysis and an experimental characterization of its modal behavior in free-end tool conditions as well as in different tool/sheet contact conditions through a simple indentation forming test inside an AA5086 metal sheet. Experimental results highlight the importance of considering process boundary conditions for modal identification and the influence of the vibration direction on the force reduction in forming conditions. A forming force reduction up to 26% is obtained exciting the bending mode of vibration of the presented forming tool identified in tool/sheet contact configuration, while reduction is less significant for the and bending modes.

Investigation of Advanced Robotized Polymer Sheet Incremental Forming Process

Heat-assisted friction stir incremental sheet forming of thermoplastics

Mechanism Investigation for the Influence of Tool Rotation and Laser Surface Texturing (LST) on Formability in Single Point Incremental Forming

Application of the Finite Element Method to the Incremental Forming of Polymer Sheets: The Thermomechanical Coupled Model and Experimental Validations

Investigations on the Forming Characteristics of a Novel Flexible Incremental Sheet Forming Method for Low-Ductility Metals at Room Temperature

Optimisation of a novel hot air contactless single incremental point forming of polymers

Design and characterization of a vibrating tool for incremental sheet forming process

Investigation of Material Deformation Mechanism in Double Side Incremental Sheet Forming

Research on Sheet Metal Digital Incremental Forming Technology without Support

INFLUENCE OF TECHNOLOGICAL PARAMETERS ON MACHINING ACCURACY IN INCREMENTAL FORMING

Mechanism of twist in incremental sheet forming of thermoplastic polymer

Investigations on the deformation mechanism of a novel three-sheet incremental forming

Single-Point Incremental Forming of Titanium and Titanium Alloy Sheets

Analytical and Experimental Investigations on Deformation Mechanism and Fracture Behavior in Single Point Incremental Forming

Thermal-Assisted Single Point Incremental Forming of Jute Fabric Reinforced Poly(lactic acid) Biocomposites

Change in geometry size and thinning rate in single-point incremental forming process of TA1 sheet: evaluation method and finite element analysis

Experimental and numerical studies on two-point incremental forming of woven fabric composite sheet

Finite element analysis of forming of sheet metal blank in manufacturing metal/polymer macro-composite components via injection moulding

Parametric Optimization on Single Point Incremental Forming of Aluminum Alloy AA 2219-O using Response Surface Methodology

Tailoring Titanium Sheet Metal Using Laser Metal Deposition to Improve Room Temperature Single-Point Incremental Forming

Thermo-Mechanical Numerical Simulation of Friction Stir Rotation-Assisted Single Point Incremental Forming of Commercially Pure Titanium Sheets