Abstract:The role of proton irradiation in the general oxidation of 316 L stainless steel in simulated PWR primary water after 1000 h immersion was clarified by comparing the microstructural and microchemical features of oxides formed on both the irradiated and un-irradiated regions of identical grains. Hence, the interference from differences in crystallographic orientation can be ruled out. Interestingly, the average inner oxide thickness on the irradiated region is significantly thinner than that on the un-irradiated region. The enhanced resistance to oxidation on the irradiated region originates from the more protective inner oxide layer and the formation of a continuous Ni-rich zone near the oxide/matrix interface. The inner oxide formed on irradiated region is less deficient in cation due to the enhanced diffusion of Cr from matrix by the irradiation-induced defects, thus making a better diffusion barrier. Meanwhile, the formation of continuous Ni-rich zone near the oxide/matrix interface, which is facilitated by the Ni-rich defects serving as nuclei, fast generation of vacancy at the interface and suppression of the outward diffusion of surplus Ni, can diminish the available space for the growth of inner oxide. The limited oxidation space and high Cr content at the oxide/matrix interface in the irradiated region result in the formation of rocksalt oxide while spinel oxide is formed near the interface in the un-irradiated region.

Short communication: "Effect of dissolved hydrogen on the early corrosion behavior of 316 stainless steel in simulated PWR environments"

Effect of Dissolved Hydrogen on Corrosion of 316NG Stainless Steel in High Temperature Water

Revealing the Effect of O2, SO2 and H2O in Supercritical CO2 on the Corrosion Behavior of 316L Steel at Elevated Temperature

Effects of dissolved hydrogen on low-cycle fatigue behaviors and hydrogen uptake of 316LN austenitic stainless steel in simulated pressurized water reactor primary water

Effect of Ph on Corrosion Behavior of 316L Stainless Steel in Hydrogenated High Temperature Water

Effect of hydrogen on pitting corrosion of 2205 duplex stainless steel under alternating dry/wet marine environment

Stress Corrosion Cracking of Uni-Directionally Cold Worked 316ng Stainless Steel in Simulated Pwr Primary Water with Various Dissolved Hydrogen Concentrations

Effect of Hydrogen on Corrosion Behavior of 321 Stainless Steel in NH4Cl Solution

Synergistic Effect of Solid State Hydrogen and Cold Work Pretreatment on Oxide Films Grown on 316L Stainless Steel during Short Term Immersion in Deaerated High Temperature Water at 300 °C

Diffusible Hydrogen Facilitated Stress Corrosion Cracking in 316 Stainless Steel Using In-Situ Gaseous Hydrogen Charging in Simulated PWR Environment

Effect of hydrogen charging on the corrosion behavior of a body-centered cubic FeCrV medium entropy alloy

Clarifying the irradiation effect on the general oxidation of 316L stainless steel in high temperature hydrogenated water after 1000 h immersion

Clarifying the Irradiation Effect on the General Oxidation of 316L Stainless Steel in High Temperature Hydrogenated Water after 1000h Immersion

Hydrogen effects on passivation and SCC of 2205 DSS in acidified simulated seawater

Effects of Temperature on Corrosion Performances of TiO2/SS316L in Supercritical Water for Hydrogen Production

Corrosion of 316L stainless steel in high temperature water and steam: Mechanisms of corrosion

Impact of Diffusible Hydrogen on Corrosion of Alloy 600 at 288°C: an In-Situ Electrochemical Study

Effects of Hydrogen on the Crevice Corrosion Behaviors of Duplex Stainless Steel 2205

Effect of heavy ion irradiation on the electrochemical behavior of 321 stainless steel

Evaluation of Stress Corrosion Cracking Susceptibility of Forged 316 Stainless Steel in Simulated Primary Water

Effect of dissolved oxygen and hydrogen on the stress corrosion cracking behavior of alloy 600 in high temperature water