Abstract:<p>Strain hardening behaviours at large strain under various loading conditions are the basic but the most important input for reliable numerical simulation of plastic deformation processes, such as sheet metal forming and crash. However, neither the flow curve at large strain beyond necking nor the strain hardening under stress states different from uniaxial tension can be reasonably characterized by the widely employed tensile tests of dogbone specimens. In this study, various experimental methods are investigated to characterize strain hardening behaviours up to large deformation under different stress states for an aluminium alloy sheet of AA5182-O. The experiments conducted include tensile tests of four different specimens (e.g. dog-bone specimen, notched specimen, specimen with a central hole and in-plane shear specimen), bulge tests and twin bridge shear tests. These tests cover wide stress states ranging from shear to equibiaxial tension. Strain hardening is obtained by both analytical computation and an inverse engineering approach under different loading conditions of shear, uniaxial tension, plane strain tension and equibiaxial tension. These two approaches are evaluated by comparing the obtained stress-strain curves under different loading conditions. The evaluation shows that the inverse engineering approach is an effective method to characterize the stress-strain curve up to large plastic deformation till fracture for tests with inhomogeneous deformation. The results also reveal that it needs to develop advanced yield functions to model yielding and hardening behaviours under complex stress states.</p>

Uncertainty in flow stress measurements using X-ray diffraction for sheet metals subjected to large plastic deformations

Study on Measurement Method of Interior Stress Distributions in Engineering Rolled-Plates

Experimental Methodology for Obtaining the Flow Curve of Sheet Materials in a Wide Range of Strains

Stress evolution in plastically deformed austenitic and ferritic steels determined using angle- and energy-dispersive diffraction

A Simple Calibration Method to Consider Plastic Deformation Influence on X-ray Elastic Constant Based on Peak Width Variation

Stress analysis of polycrystalline thin films and surface regions by X-ray diffraction

A Novel X-ray Diffraction Procedure for Determining Residual Stresses Around Cold Expanded Holes

Multiaxial constitutive behavior of an interstitial-free steel: Measurements through X-ray and digital image correlation

Deconvoluting Thermomechanical Effects in X-ray Diffraction Data using Machine Learning

Analysis and Modeling of Stress-Strain Curves in Microalloyed Steels Based on a Dislocation Density Evolution Model

Mathematical framework for the plastic flow of fine-grained solids, from yield to fracture

A complete grain-level assessment of the stress-strain evolution and associated deformation response in polycrystalline alloys

X-ray Diffraction for the Determination of Residual Stress of Crystalline Material: An Overview

Stored Energy, Microstructure, and Flow Stress of Deformed Metals

Neutron diffraction methods for the study of residual stress fields

Large strain flow curve identification for sheet metals under complex stress states

A constitutive model on flow stress prediction from the contribution of twin and grain refinement, strain and strain rate during surface mechanical attrition treatment of metals

Careful finite element simulations of cold rolling with accurate through-thickness resolution and prediction of residual stress

An evaluation of plastic flow stress models for the simulation of high-temperature and high-strain-rate deformation of metals

Residual Stress of Individual Aluminum Grains from Three Dimensional X-Ray Diffraction