Abstract:In this work, Ce and Mn were added to Cu-SSZ-39 zeolites by ion-exchange process, and their activity performance for selective catalytic reduction of NOx with ammonia (NH3-SCR), especially hydrothermal stability (hydrothermal aging at 750, 800, 850 °C) was investigated systematically. It is found that the addition of Ce and Mn, Mn more evidently, both can greatly improve the activity of Cu-SSZ-39 catalyst. Moreover, MnCu-SSZ-39 catalyst have shown superior hydrothermal stability compared with Cu-SSZ-39 catalyst, and outstandingly its activity is not only not decreased significantly like Cu-SSZ-39 but improved obviously after hydrothermal aging at as high as 850°C. The high and improved activity of Ce and Mn added Cu-SSZ-39 is ascribed to more active CuO crystallites formation in the inner channel and higher acidity strength. The superior hydrothermal stability of MnCu-SSZ-39 may be due to its well-preserved structure and acid density even after hydrothermal aging at as high as 850 °C. Moreover, during the hydrothermal aging process, not only Cu oxides aggregation is inhibited, but also more Cu2+ ion species are induced to ion exchange sites in MnCu-SSZ-39, which may account for its excellent hydrothermal stability (even higher than the activity of fresh samples). The mechanism analysis has shown NH3-SCR reaction over Cu-SSZ-39 and CeCu-SSZ-39 samples follow the "Langmuir−Hinshelwood" (L-H) mechanism, while on MnCu-SSZ-39, it follows both "L−H" and "Eley−Rideal" (E−R) mechanisms, which may also be another reason for its excellent activity and hydrothermal stability. Moreover, "Fast SCR" mechanisms also occur and contribute over hydrothermal aged A-MnCu-SSZ-39 sample, in addition to "L-H" and "E-R" mechanisms. Thus, the easily prepared MnCu-SSZ-39 catalyst has shown the excellent activity and super hydrothermal stability, with 90% NO conversion at 245 °C and broader temperature window of 245 °C to 550 °C, even after hydrothermal aging at 850 °C, therefore indicate great potential for future application in NOx purifying from diesel engine exhaust.

Enhancement of catalytic activity in NH3-SCR reaction by promoting dispersibility of CuCe/TiO2-ZrO2 with ultrasonic treatment

In Situ DRIFTS Studies of NH3-SCR Mechanism over V2O5-CeO2/TiO2-ZrO2 Catalysts for Selective Catalytic Reduction of NOx

Enhancement of nitric oxide reduction via CeZrOx/Cu‐SSZ‐39 hybrid catalyst: Improving activity and hydrothermal stability

Investigation on the redox/acidic features of bimetallic MOF-derived CeMOx catalysts for low-temperature NH3-SCR of NOx

Modification of Cu/ZSM-5 Catalyst with CeO2 for Selective Catalytic Reduction of NOx with Ammonia

Engineering CeZrOx-Cu/SSZ-13 coupled catalysts to synergistically enhance the low-temperature NH3-SCR activity

Role of Ce in promoting low-temperature performance and hydrothermal stability of Ce/Cu-SSZ-13 in the selective catalytic reduction of NOx with NH3

CuOx and WOx modified CeO2-TiO2 with various morphologies for the selective catalytic reduction of NOx with NH3

Promoting effect of Ce and Mn addition on Cu-SSZ-39 zeolites for NH3-SCR reaction: Activity, hydrothermal stability, and mechanism study

Ti species regulated CuO/CeO2 catalyst for efficient simultaneously NH3-SCR denitration and CO oxidation under oxygen-rich conditions

Promotional effect of Ce in NH3-SCO and NH3-SCR reactions over Cu-Ce/SCR catalysts

Excellent Low-Temperature NH3-SCR NO Removal Performance and Enhanced H2O Resistance by Ce Addition over the Cu0.02Fe0.2CeyTi1-yOx (y = 0.1, 0.2, 0.3) Catalysts.

Promotional Effects on NH3-SCR Performance of CeO2–SnO2 Catalysts Doped by TiO2: A Mechanism Study

Oxygen-vacancy mediated acidity and redox properties on WOx/Cu-doped CeO2 for the removal of NOx

Effect of Ion-Exchange Sequences on Catalytic Performance of Cerium-Modified Cu-SSZ-13 Catalysts for NH3-SCR

Improved surface acidity of CeO2/TiO2 catalyst by Cu doping to enhance the SCR catalytic activity

Enhancing the K resistance of CeTiOx catalyst in NH3-SCR reaction by CuO modification

A Study on Chemisorbed Oxygen and Reaction Process of Fe–CuOx/ZSM-5 Via Ultrasonic Impregnation Method for Low-Temperature NH3-SCR

Highly Active Alkali Etching Silica-Modified Cu-Ce-Ti Catalyst with Superior Water Resistance for Low Temperature NOx Reduction

Characterization of Commercial Cu-SSZ-13 and Cu-SAPO-34 Catalysts with Hydrothermal Treatment for NH3-SCR of NOx in Diesel Exhaust

Enhanced activity of tungsten modified CeO2/TiO2 for selective catalytic reduction of NOx with ammonia