Abstract:A systematic investigation of the structural stability, evolution and hydrogen-storage properties of Mg-based hydrides and nanostructures was carried out, involving experimental mechanical milling and chemical alloying, and electronic structural simulations of hydrogen-metal interactions. The effects of milling on particle size, lattice parameters, microstructure, and phase composition of the powder mixtures were characterized using SEM, X-Ray diffraction analyses. Mechanical milling was shown to be an effective method of refining the particle size, particularly when MgH2 is involved. The influences of the selected chemical elements, including transition metals, on hydrogen desorption of various milled mixtures were clearly identified using coupled Thermogravimetry (TG) and Differential Scanning Calorimetry (DSC). The asreceived MgH2 shows an onset desorption temperature of 420°C. Mechanical milling reduces the onset temperature to 330°C. Chemical alloying, via surface catalysis and/or solid-solutioning, further increases the desorption kinetics and reduces the desorption temperature down to 250°C. The degree of such effect decreases from Ni, Al, Fe, Nb, Ti, to Cu. A multi-component mixture of (MgH2+Al+Ni+Y+Ce) exhibits relatively fast desorption kinetics and the lowest desorption temperature at about 200°C. Electronic structural simulations further clarify the effects of alloying elements on the stability and bonding of modified hydride systems. The coupled experimental and theoretical approach has laid a valuable foundation for continued development of new and cost-effective hydrogen storage systems with a high capacity, a low desorption temperature and rapid kinetics.

High-temperature high-pressure reactive ball milling synthesis of Mg-Ni-based solid-state hydrogen storage materials

Synthesis of Mg2FeH6 by high‐temperature high‐pressure reactive planetary ball milling

Improving MgH2 formation kinetics and its effect on NaBH4 synthesis

Phase-structure and Hydrogen Storage Behaviors of Mg+10％ Ni2P Composite Prepared by Reactive Ball-Milling

Magnesium-based hydrogen storage nanomaterials prepared by high energy reactive ball milling in hydrogen at the presence of mixed titanium–iron oxide

The Electrochemical Evaluation of Ball Milled MgNi-based Hydrogen Storage Alloys

Sorption behavior of MgH2-Ti for Hydrogen storage material prepared by high pressure milling

Hydrogen storage properties of the Mg–Ti–H system prepared by high-energy–high-pressure reactive milling

Hydriding Characteristics of Mg2NiMg2Ni Prepared by Mechanical Milling of the Product of Hydriding Combustion Synthesis

Nanoscale Ni as a catalyst in MgH2 for hydrogen storage material

Hydriding Characteristics of Mg2ni Prepared by Mechanical Milling of the Product of Hydriding Combustion Synthesis

Preparation of Mg2Ni Hydrogen Storage Alloy Materials by High Energy Ball Milling

An electrochemical investigation of mechanical alloying of MgNi-based hydrogen storage alloys

Synthesis and Hydrogen Sorption Characteristics of Mechanically Alloyed Mg(NixMn1-x)2 Intermetallics

Mechanochemical Synthesis and First-Principles Simulations of Mg-based Hydrogen Storage Materials

Synthesis of Mg 2 FeH 6 Assisted by Heat Treatment of Starting Materials

Hydrogen Storage Properties of Nanosized MgH<sub>2</sub>−0.1TiH<sub>2</sub>Prepared by Ultrahigh-Energy−High-Pressure Milling

Nanomaterials for Hydrogen Storage Produced by Ball Milling

Thermally-assisted Milling and Hydrogenolysis for Synthesizing Ultrafine MgH2with Destabilized Thermodynamics.

Hydrogen storage properties of Mg-23.3wt.%Ni eutectic alloy prepared via hydriding combustion synthesis followed by mechanical milling

Improved H-Storage Performance of Novel Mg-Based Nanocomposites Prepared by High-Energy Ball Milling: A Review