Abstract:Water concentration inside proton exchange membrane fuel cells (PEMFCs) is a key factor affecting performance and durability. Therefore, many studies have been conducted to maintain an appropriate moisture balance inside the stack. The most recent study was a study that confirmed moisture distribution using five sensors inside the anode and cathode. However, in this study, it is difficult to determine the exact moisture distribution inside the stack due to insufficient sensors. In this study, a unit cell PEMFC including micro relative humidity and temperature (RH/T) sensors with an active area of 100cm 2 was fabricated to characterize the water concentration. Before installing the micro sensors into the bipolar plates, a reliability test is conducted, and the result shows that the sensor is reliable at 60 °C and 70 °C. After that, for the in-situ temperature and relative humidity measurement, the 50 sensors are installed along the anode and cathode gas channels evenly in the active area. This study investigates the distribution of water transport behavior, temperature, and water concentration at 0.6 V, 0.5 V and 0.4 V of electric load. Dew point is introduced to analyze water concentration, and net water mole flux is calculated to evaluate water transport behavior. The results show that as the load applied to the PEMFC increases, higher temperature band expands from downstream to upstream of the gas flow. In addition, at 0.4 V, observing the highest temperature band between 61 °C to 62 °C, it is concluded that the flow field of the reaction zone is more activated along the downstream. Meanwhile, the anode becomes more dehydrated with higher load and the cathode more hydrated. At 0.4 V, the maximum dew point on the cathode is 37.5 °C, and the minimum dew point on the anode is 30 °C. In conclusion, even though water transports from the cathode to the anode, due to dry inlet gas, 20% of relative humidity, and high flow rate, hydrogen by 2.8lpm and air by 6.65lpm, the anode doesn't become hydrated.

Persistent Effect Test and Internal Microscopic Monitoring for PEM Water Electrolyzer

High temperature proton exchange membrane fuel cell hybrid power system monitoring platform designing

Flexible Seven-in-One Microsensor Embedded in High-Pressure Proton Exchange Membrane Water Electrolyzer for Real-Time Microscopic Monitoring

Real-Time Data Acquisition Inside High-Pressure PEM Water Electrolyzer

Investigation on the Microfluidics in PEM Water Electrolyzers

In-situ Investigation of Bubble Dynamics and Two-Phase Flow in Proton Exchange Membrane Electrolyzer Cells

Real-Time Monitoring of the Temperature, Flow, and Pressure Inside High-Temperature Proton Exchange Membrane Fuel Cells

Internal Microscopic Diagnosis of Accelerated Aging of Proton Exchange Membrane Water Electrolysis Cell Stack

Effects of Membrane Electrode Assembly Properties on Two-Phase Transport and Performance in Proton Exchange Membrane Electrolyzer Cells

Multiple in-situ measurement of water transport in the bipolar plate of proton exchange membrane fuel cell

Experimental investigation of degradation mechanism in proton exchange membrane water electrolyzer under prolonged and severe bubble accumulation condition

A Digital Twin Model of Hydrogen Production System by Proton Exchange Membrane Electrolysis

Exploring and understanding the internal voltage losses through catalyst layers in proton exchange membrane water electrolysis devices

Discovering Reactant Supply Pathways at Electrode/PEM Reaction Interfaces Via a Tailored Interface‐Visible Characterization Cell

Comprehensive study and optimization of membrane electrode assembly structural composition in proton exchange membrane water electrolyzer

Numerical Investigation on the Effects of Design Parameters and Operating Conditions on the Electrochemical Performance of Proton Exchange Membrane Water Electrolysis

Porous Transport Layers for Proton Exchange Membrane Electrolysis Under Extreme Conditions of Current Density, Temperature, and Pressure

Pulsed Dynamic Electrolysis Enhanced PEMWE Hydrogen Production: Revealing the Effects of Pulsed Electric Fields on Protons Mass Transport and Hydrogen Bubble Escape

Development of PEM Electrolyzer Stack and Electrochemical Performance Study on Different Operating Conditions

Effects of interfacial contact under different operating conditions in proton exchange membrane water electrolysis

Designing Membrane Electrode Assembly for Weakly Humidity-Dependent Proton Exchange Membrane Fuel Cells