Modelling of a Proton-Exchange Membrane Electrolysis Cell with Liquid-Fed Cathode
Michael Robert Gerhardt,Jenny S Østenstad,Xavier Raynaud,Alejandro O Barnett
DOI: https://doi.org/10.1149/ma2023-01361979mtgabs
2023-08-28
ECS Meeting Abstracts
Abstract:Conventional proton-exchange membrane (PEM) water electrolysers use much thicker membranes (>175 μm) than their PEM fuel cell counterparts (<25 μm), which reduces hydrogen crossover but also reduces electrolyzer efficiency due to the increased Ohmic resistance 1 . Reduction of hydrogen crossover is critical in conventional systems to avoid buildup of hydrogen in the anode above the lower explosive limit. Due to the use of liquid water at the anode in conventional systems, the anode cannot be flushed with air or an inert gas to reduce the hydrogen concentration. If the liquid water supply is moved to the cathode, the anode can be easily purged with air, reducing the safety concern related to hydrogen crossover. Proof-of-concept experiments 2 have demonstrated the viability of this approach, but many open questions remain regarding the interplay between water transport, water consumption, membrane hydration, and cell performance, as well as understanding what components and properties are most important in improving the efficiency of such a device. In this work, a framework for modelling of PEM electrolysis cells will be outlined, with special attention to wet and dry anode conditions. The model will be used to provide guidance for optimizing system performance while contributing to understanding of local processes inside an electrolysis cell such as water transport, heat generation, reaction distribution, and bubble formation. We study the impact of various design and operational choices, such as membrane thicknesses, PTL structure, air feed humidity, and differential pressure operation, on the rate of water transport from cathode to anode and on overall cell polarization performance. Using these results, we provide design recommendations for PEM electrolysers with liquid-fed cathodes. Finally, progress towards an open-source implementation of this model will be discussed. This work has been performed within the HOPE (Revolutionizing Green H ydr o gen P roduction with Next Generation PEM Water E lectrolyser Electrodes) and HYSTACK (Low cost, high efficiency PEM electrolyser stack) projects financially supported by the Research Council of Norway under project numbers 325873 and 321466, respectively. Ayers, K. et al. Perspectives on Low-Temperature Electrolysis and Potential for Renewable Hydrogen at Scale. Annu. Rev. Chem. Biomol. Eng. 10 , 219–239 (2019). Barnett, A. O. & Thomassen, M. S. Method for producing hydrogen in a PEM water electrolyser system, PEM water electrolyser cell, stack and system. Patent No.: WO 2019/009732. EP3649276B1. US11408081B2.