Abstract:Driven by the political and societal endeavors to drastically reduce CO 2 emissions in several sectors within the next decades, such as in the transport or the industrial production sectors, the substitution of fossil fuels by "green" hydrogen is widely considered. Electrochemical splitting of water inside polymer electrolyte membrane water electrolyzers (PEMWEs) is one possibility for efficient and sustained production of "green" hydrogen. However, its efficiency is still limited by the coupled kinetics of flow and reaction that occur at the anodic side of the PEMWEs. Especially the microstructure inside the anodic porous transport layer (PTL) plays a major role in the counter-current transport of the feedstock water and the product oxygen. In this work, a prototype model of a novel microfluidic PEMWE cell for experimental examination of the two-phase flow inside the anodic PTL is presented. The cell is made of transparent PMMA (Poly-Methyl-Methacrylate) to allow monitoring of the fluid flow. The anodic PTL is represented by a quasi 2D pore network with uniformly distributed pore sizes, similar to previous work [1, 2]. However, in contrast to previous works, the microfluidic device is realized as a complete electrochemical cell. Thus, the gas phase is not injected at a discrete point but generated at an electrically activated catalyst coated membrane with iridium ruthenium oxide on the anode side and carbon-supported platinum on the cathode side. Platinum meshes were used as current collectors on both sides. The microfluidic electrochemical cell is used to study the correlation of gas-liquid invasion patterns in-dependence of the pore network structure and the applied current densities and stoichiometry of flow rates. In contrast to more advanced measurements, like operando neutron imaging [3], the simplified quasi 2D structure allows studying the invasion profiles directly. In addition to that, very easy comparison of the experimentally recorded profiles to simulation results, e.g., from Lattice Boltzmann simulation [4], is possible via simple image processing algorithms. Keywords: microfluidic PEMWE cell; anodic porous transport layer (PTL); counter-current transport; invasion regimes; current density; pore-scale physics, Lattice Boltzmann simulation. References [1] F. Arbabi, A. Kalantarian, R. Abouatallah, R. Wang, J.S. Wallace, A. Bazylak, Feasibility study of using microfluidic platforms for visualizing bubble flows in electrolyzer gas diffusion layers, J. Power Sources. 258 (2014) 142–149. https://doi.org/10.1016/j.jpowsour.2014.02.042. [2] C.H. Lee, J. Hinebaugh, R. Banerjee, S. Chevalier, R. Abouatallah, R. Wang, A. Bazylak, Influence of limiting throat and flow regime on oxygen bubble saturation of polymer electrolyte membrane electrolyzer porous transport layers, Int. J. Hydrogen Energy. 42 (2017) 2724–2735. https://doi.org/10.1016/j.ijhydene.2016.09.114. [3] J.K. Lee, C.H. Lee, K.F. Fahy, P.J. Kim, J.M. LaManna, E. Baltic, D.L. Jacobson, D.S. Hussey, S. Stiber, A.S. Gago, K.A. Friedrich, A. Bazylak, Spatially graded porous transport layers for gas evolving electrochemical energy conversion: High performance polymer electrolyte membrane electrolyzers, Energy Convers. Manag. 226 (2020) 113545. https://doi.org/10.1016/j.enconman.2020.113545. [4] S. Paliwal, D. Panda, S. Bhaskaran, N. Vorhauer-Huget, E. Tsotsas, V.K. Surasani, Lattice Boltzmann method to study the water-oxygen distributions in porous transport layer (PTL) of polymer electrolyte membrane (PEM) electrolyser, Int. J. Hydrogen Energy. (2021). https://doi.org/https://doi.org/10.1016/j.ijhydene.2021.04.112.

Discovering Reactant Supply Pathways at Electrode/PEM Reaction Interfaces Via a Tailored Interface‐Visible Characterization Cell

In-situ Investigation of Bubble Dynamics and Two-Phase Flow in Proton Exchange Membrane Electrolyzer Cells

In-Depth Understanding of Oxygen Transfer in the Catalyst Layer of High-Temperature Proton Exchange Membrane Fuel Cells

Insight into Oxygen Transport in Proton Exchange Membrane Water Electrolyzers by In Situ X‐Ray Characterization

Probing Current Density Distribution Over Catalyst Layer at Micrometer Scale in Water Electrolyzer

Investigation on the Microfluidics in PEM Water Electrolyzers

Mechanistic Interrogation of the Role of Electrode Microstructural Attributes in PEM Water Electrolysis

A New Design of a Microfluidic Experimental Cell for the Study of Two-Phase Flow inside a PEM Water Electrolyzer

Nanochannel electrodes facilitating interfacial transport for PEM water electrolysis

Study of In-Situ Visualization and Two-Phase Flow Characteristics in Proton Exchange Membrane Electrolyzer

Discovery of True Electrochemical Reactions for Ultrahigh Catalyst Mass Activity in Water Splitting

Effects of interfacial contact under different operating conditions in proton exchange membrane water electrolysis

Exploring and understanding the internal voltage losses through catalyst layers in proton exchange membrane water electrolysis devices

Tailoring a Three-Phase Microenvironment for High-Performance Oxygen Reduction Reaction in Proton Exchange Membrane Fuel Cells

Insights into the rapid two-phase transport dynamics in different structured porous transport layers of water electrolyzers through high-speed visualization

Visualization on rapid and micro-scale dynamics of oxygen bubble evolution in PEMECs

In situ investigation on ultrafast oxygen evolution reactions of water splitting in proton exchange membrane electrolyzer cells

Novel thin/tunable gas diffusion electrodes with ultra-low catalyst loading for hydrogen evolution reactions in proton exchange membrane electrolyzer cells

(Digital Presentation) Diagnostic Study of the Key Performance-Limiting Factors in Anion Exchange Membrane Fuel Cells

A Segmented Along the Channel Test Cell for Locally Resolved Analysis at High Current Densities in PEM Water Electrolysis

Investigating the Influence of Inlet Relative Humidity on Polymer Electrolyte Membrane Fuel Cell Performance by Visualizing 4-D Water Distributions in Gas Diffusion Layers