Abstract:Experimental observations indicate that fast crack growth often exhibits a rate dependency, which is caused by the viscosity of the material and the dissipation of energy resulting from the branching of microcracks. To address this phenomenon in simulation modeling, this study introduces a rate-dependent augmented finite element method designed for analyzing fast arbitrary crack growth. The method utilizes the maximum principal stress criterion to simulate arbitrary crack growth and predict the path of crack growth. The elements where crack growth is expected are divided into subelements, and they are re-assembled by incorporating rate-dependent cohesive elements between them to construct augmented finite elements. The cohesive elements are based on a rate-dependent trapezoid traction–separation relationship, where the critical traction and fracture toughness are modeled as functions of the separation rate and crack growth speed. The augmented finite elements only contain external nodal degrees of freedom (DoFs), while internal nodal DoFs are condensed. They can be utilized as conventional elements. A numerical algorithm based on the proposed method was developed in this article, and it was implemented in ABAQUS via user element subroutine. The effectiveness of this method and algorithm is validated through an example of dynamic crack growth in a double cantilever beam. The results demonstrate agreement with experimental and computational findings reported in the literature. Additionally, the method was applied to other structures, yielding reasonable outcomes. Analysis of these examples confirms the method's utility in predicting fast arbitrary crack growth under dynamic load conditions.

Accelerated fatigue crack growth simulation in a bimaterial interface

A Hybrid Modeling Method of Fatigue Crack Growth for Gas Turbine Blades under Combined High and Low Cycle Fatigue Loadings

An adaptive acceleration scheme for phase-field fatigue computations

Simulation of Quasi-Static Crack Propagation by Adaptive Finite Element Method

Accelerated high-cycle phase field fatigue predictions

Finite Element Modelling of Complex 3D Static and Dynamic Crack Propagation by Embedding Cohesive Elements in Abaqus

Numerical Study on High-Cycle Fatigue Crack Growth of Sinusoidal Interface Based on Cyclic Cohesive Zone Model

Modeling of progressive high-cycle fatigue in composite laminates accounting for local stress ratios

An Abaqus plug-in to simulate fatigue crack growth

Numerical prediction based on XFEM for mixed-mode crack growth path and fatigue life under cyclic overload

An adaptive finite element method for coupled fretting wear and fatigue crack propagation simulation

Automated Simulation of Fatigue Crack Propagation for Two-Dimensional Linear Elastic Fracture Mechanics Problems by Boundary Element Method

Modeling of Fatigue Crack Propagation

Application of a Cohesive Zone Model for Simulating Fatigue Crack Growth from Moderate to High <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" id="M1"><mml:mi mathvariant="normal">Δ</mml:mi><mml:mi>K</mml:mi></mml:math> Levels of Inconel 718

Low-cycle fatigue crack growth in brittle materials: Adaptive phase-field modeling with variable-node elements

Crack growth-based life prediction for additively manufactured metallic materials considering surface roughness

Modeling of crack path in layered architectures composed of dissimilar materials

Rate-dependent augmented finite element method for fast arbitrary crack growth

A numerical framework for simulating progressive failure in composite laminates under high-cycle fatigue loading

Rapid and accurate semi-analytical method for the fatigue assessment with critical plane methods under non-proportional loading and material plasticity