Abstract:Fracture growth in a material is strongly influenced by the presence of inhomogeneities, which deviate crack trajectories from rectilinearity and deeply affect failure. Increasing crack tortuosity is connected to enhancement of fracture toughness, while often a crack may even be stopped when it impinges a void, which releases the stress concentration. Therefore, the determination of crack trajectories is important in the design against failure of materials and mechanical pieces. The recently developed phase-field approach (AT1 and AT2 models), based on a variational approach to damage localization, is believed to be particularly suited to describe complex crack trajectories. This belief is examined through a comparison between simulations and photoelastic experiments on PMMA plates, which have been designed in a new way, to highlight the effects of notches and circular holes on fracture propagation. The latter is shown to initiate from a notch and to be strongly attracted by voids. When a void is hit, fracture is arrested, unless the void contains a notch on its internal surface, from which a new crack nucleates and propagates. Different mechanical models are tested where fracture initiates and grows (i.) under Mode I compact tension, (ii.) four-point bending and (iii.) a tensile stress indirectly generated during compression of samples containing a circular hole. The experiments show that the fracture propagation may be 'designed' to develop in different tortuous paths, involving multiple arrests and secondary nucleation. Simulations performed with an ad hoc implemented version of the AT1 and AT2 phase-field methods (equipped with spectral decomposition, in which a crack is simulated as a highly localized zone of damage accumulation) are shown to be in close agreement with experiments and therefore confirm the validity of the approach and its potentialities for mechanical design.

Modeling of crack path in layered architectures composed of dissimilar materials

Finite Element Modelling of Complex 3D Static and Dynamic Crack Propagation by Embedding Cohesive Elements in Abaqus

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

Insights on low cycle fatigue crack formation and propagation mechanism: A microstructurally-sensitive modeling

Phase field simulation of fatigue crack propagation under complex load situations

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

A simulation method for fatigue-driven delamination in layered structures involving non-negligible fracture process zones and arbitrarily shaped crack fronts

Computational Boundary Layer Approaches for Fatigue Crack Propagation under Mixed‐mode Loading Conditions

Transverse crack evolution modeling of cross-ply laminates with a single layer of phantom node intraply elements for identically-oriented ply groups

Progressive Damage and Crack Propagation Analysis of Composite-Patched Aluminum Plate with 3D Inclined Crack under Fatigue Loading

Application of a Cohesive Zone Model for Simulating Fatigue Crack Growth from Moderate to High <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" id="M1"><mml:mi mathvariant="normal">Δ</mml:mi><mml:mi>K</mml:mi></mml:math> Levels of Inconel 718

A phase field modeling approach of cyclic fatigue crack growth

Weak interface-induced repeated kinking of a central crack in a brittle multilayered plate under remote shear loading

Low-cycle fatigue crack growth in brittle materials: Adaptive phase-field modeling with variable-node elements

Cohesive Model for the Simulation of Crack Initiation and Propagation in Mixed-Mode I/II in Composite Materials

Toughening mechanisms and damage propagation in Architected-Interfaces

Application Of A Cohesive Zone Model For Simulating Fatigue Crack Growth From Moderate To High Delta K Levels Of Inconel 718

About the Role of Interfaces on the Fatigue Crack Propagation in Laminated Metallic Composites

Failure through crack propagation in components with holes and notches: An experimental assessment of the phase field model

Crack path at bedding planes of cracked layered rocks

Characterization and Modelling of Multiple Intralaminar Cracking Initiation under Tensile Quasi-Static and Fatigue Loading